Emergencies Whether the handbrake and footbrake are more effective when applied together

On the surface, the foot brake and the handbrake are on at the same time, and the two braking systems work at the same time, which can provide greater braking power. But in reality, doing so only results in a longer braking distance! It's easier to get the car out of control!

This is mainly due to the congenital insufficiency of the handbrake system, because the handbrake is a purely mechanical braking system, if the handbrake is pulled up during the car, then, the rear wheel is prone to locking.

The main function of the handbrake is to control the speed of the rear wheels of the vehicle. But in fast driving, the braking force of the handbrake is very small. If the owner pulls the handbrake at high speed, it will be easy to lock the rear wheels, the cable will be broken, and the vehicle will slide sideways or even roll over.

At the same time, when driving in sharp turns or rain, ice and snow, do not use the handbrake in a hurry, otherwise the ABS system will fail, and the rear wheel has no speed signal at all, which is prone to deviation and tail flicking.

Finally, even in an emergency, do not use the two brakes together, even if the brakes fail, do not forcibly pull the handbrake, the correct way is to master the steering wheel, do not change the line at will, the only effective way to slow down the speed of the car is to gradually downshift in order, so that the engine due to the downshift of the drag force the engine to reduce the speed, so that the speed of the car is reduced, when the vehicle is lowered to the first gear, it is completely possible to stop the car by the handbrake.

Hello, this is totally possible, this two work at the same time and really have a better braking effect!

Hello, in this emergency, the foot brake and the hand brake will be better if the brake is braked together, and the engine brake can also be used.

In the case of high speed, it is easy to overturn.

Handbrake.

Electronic parking system rental system.

EPB: Electrical Park Brake) refers to the technology that integrates the temporary braking function during driving and the long-term braking function after parking, and realizes the parking brake by electronic control. Electronic parking brake.

It is a technology that realizes the parking brake by means of electronic control, and its working principle is the same as that of the mechanical handbrake, which is through the brake disc and brake pads.

The frictional force generated.

to control the parking brake, but the control mode has changed from the previous mechanical handbrake lever to an electronic button.

The electronic parking brake extends from the basic parking function to the automatic parking function Auto Hold automatic parking function technology, so that the driver does not need to brake for a long time when the vehicle is stopped. In the case of the automatic electronic parking brake, the vehicle can avoid unnecessary sliding, simply put, the vehicle will not slip behind.

Emergency braking is a foot brake.

In an emergency, whether it is an instinctive reaction or a braking system, it is correct to apply the foot brake hard. And you need to control the direction well, never use the handbrake during emergency braking, otherwise the car will lose control. Emergency braking refers to the use of service brakes to decelerate, driving source spring braking refers to foot brakes, and handbrakes are parking brakes, which are not included in the operation of emergency braking.

Automobile braking system, that is, automobile braking system, refers to the special braking mechanism that installs braking devices on the car in order to technically ensure the safe driving of the car and improve the average speed of the car. Brake pads are brake pads on the car that are specially used to generate friction on the brakes. Also called brake pads.

There is no fixed replacement cycle for brake pads, it is recommended to check them regularly, and the general family car is inspected at about 3 60,000 kilometers to determine the replacement of brake pads according to the degree of wear.

The functions of brake pads are as follows:

Brake pads, in which the thermal insulation layer is made up of materials that do not transfer heat, are used for thermal insulation. When braking, it is squeezed on the brake disc or brake drum to produce friction, so as to achieve the purpose of reducing the speed of the vehicle and braking. Due to friction, the friction block will gradually be worn out, and the lower the cost, the faster the brake pad will wear out.

After the friction material is used, the brake pads should be replaced when the reeds are cracked, otherwise the brake effect will be lost and the brake disc will be damaged.