-
Anonymous users2024-02-09Go look for the motherboard's manual, which has a tutorial on it.
-
Anonymous users2024-02-08Any motherboard will have a wiring mark, but it is not necessarily at the wiring part, and it is generally located near the PCI or South Bridge. Look carefully. Just find the following letters and connect them.
1.Power switch cable.
When connecting the power switch cable, first find the two-pin plug marked "Power SW" from the cable on the chassis panel, which are white and brown, and then plug it into the pin marked "PWR SW" or "PWR" on the motherboard.
2.Reset switch cable.
It is used to hot-start the computer. To connect, first find the two-pin plug marked "Reset SW", which is white and blue, and then plug it into the sailman-based pin marked "Reset SW" or "RSR" on the motherboard.
3.Power indicator cable.
First, find the three-pin plug labeled "Power LED", the middle wire is empty and the two ends are white and green, and then insert it into the pin marked "PWR LED" or "P LED" on the motherboard.
Reminder: The power switch cable and the reset switch cable can be plugged in without paying attention to the positive and negative problems of the plugging when plugging in, and you can plug it in how you want. However, due to the use of light-emitting diode to display the work and rest of the power indicator side wiring, the connection is directional.
Some motherboards will be marked with the words "P LED+" and "P LED-", we just need to connect the green end to the P LED+ pin and the white wire to the P LED-pin.
4.Hard disk indicator cable.
First, find the two-pronged plug marked "white and red", and plug it into the pins marked "HDD LED" or "IED LED" on the motherboard. Pay attention to directionality when inserting. Generally, the motherboard will be marked with "HDD LED+" and "HDD LED-", and the red end will be connected to the HDD LED+ pin, and the white will be plugged into the "HDD LED-" pin.
5.Speaker cables.
First, find the four-pin plug of "Speaker", the two wires in the middle are empty, and the two ends are red and black, and insert it into the pins marked "Speaker" or "SPK" on the motherboard. Red is inserted into the positive pole and black is inserted into the negative pole. But it turns out that these two lines are also neutral and negative.
Push-ups can train the pectoral muscles, let's see what to pay attention to!
A varied diet, a low-fat, low-oil, low-sugar diet, and a regular diet can make the body healthier. >>>More
Turtles have a wide range of food, rice, wheat, peas, small fish, shrimp, insects, snails, etc., and the favorite foods are small fish, snails, corn and rice. In captivity, in order to meet the various nutrients needed for the growth of turtles and avoid stunted growth and anorexia due to single feed, a variety of feeds should be used, such as fish and shrimp, snails, mussels, etc. in animal feed and rice, wheat, corn, etc. in plant feed. In order for the turtle to fully digest the feed, the corn and peas must be crushed and soaked for about 2 hours before feeding, and other large pieces of food must also be chopped before feeding. >>>More
Don't talk about suffering, take suffering as the goal of your life, everyone should set goals for themselves, strive for goals, and not feel tired.
Nonsense, the dinosaurs are extinct, and they are all over the streets.