Wireless router, WIFI always drops

In the routing management, the key update cycle in the wireless security settings is set to 0 to update OK.

There are several aspects of the router that have been disconnected.

1. The wireless routing signal is too poor or the distance is too far.

You can try wired to see if this is the problem.

2. There is a problem with the line with the main server.

You can optimize your line (for free) by customer service

3. Your router is broken and will drop if it overheats slightly.

You can use a cat to see if the connection will drop (or you can try whether it is, the router will cool down and you will be able to access the Internet for a long time, otherwise the Internet will be disconnected after a short time).

4. There is a problem with the network cable at home.

It can be that one of the crystal head and connector is broken, or the wire is pressed or broken.

5. The interface socket between the computer and the wire is broken, resulting in a drop in connection.

It is possible that the computer interface is aging or the network card is broken.

It's not easy to be useful, and you need to agree with it!! Thank you!!

Wireless routers keep dropping: Router hardware aging issues.

Method 1: It is recommended to reset the router and set the dial-up again.

Reset Router Method:

Method 1: There is a button [RESET] button on the back of the router, press and hold it for 5 seconds, and then reset it.

Method 2: Go to the router --- System Tools --- reset the router.

Set up router dialing:

The IP and DNS settings of the computer are automatically obtained.

1. Open the browser - enter the general router address is this or view the login information on the back of the router) Enter the route - enter the user name and password, (the default is generally admin).

2. In the [Setup Wizard], select [PPOE Dialing] (some are ADSL Dialing), enter your Internet username and password according to the prompts, and save.

3. In [Network Parameters] --WAN Settings], select [Normal Mode], and select [PPOE Dialing] in the three options of [Connection]. The next step is to select [Auto Connect], Save, and Exit.

4. If you want to use wireless wifi, your router must have a wireless routing function, in the settings, turn on the wireless routing function, here, the wireless signal signal is changed to one of them. The strongest anti-interference.

You can also set a password for your Wi-Fi connection.

Method 2: Change the router.

There is a setting in the router, called DHCP, and you change the value to 604800. There is also an automatic shutdown time for the router, just don't turn it on.

Router disconnection solution:

First of all, we need to find out the reason for the drop, there are generally three reasons for the wireless router to drop, namely: poor line, poor quality of the wireless router wireless module and being rubbed off the network. Then let's find out the reasons one by one.

The line is poor, this is easier to find, as long as the adsl is connected normally, then it can be ruled out.

The quality of the wireless module is poor, look at the brand of the wireless router, if it is a regular brand, the purchase channel is normal, there should be no problem.

Rubbing the net, this is more troublesome, and it is also the focus of sharing with you here.

In order to avoid rubbing the network, it is best to use WPA WPA2+ password, and also set a password for router login, the following is a screenshot of these settings.

Do not use the factory password for the router login password. Because that's generic.

The wireless security password is set to WAP WAP2 password.

Another point, after everyone sets up the router, you should pay attention to it, you should choose automatic connection.

In fact, the setting of the router is relatively simple, everyone carefully read the manual, and then set it according to the requirements, and the problem of disconnection should be solved.

The router performs very well.

Read the instructions first.

Then log in to your router and follow the instructions to set up your router step by step.

Note: The three parts of WAN port, LAN port and wireless (Wi-Fi) must be set correctly.