How to use the rail socket? How to install the rail socket

The power track is used in combination with the socket, and the power behind the socket is plugged in, and the power is taken by inserting the power track.

The socket is installed on the track, pay attention to the clip to get stuck on the track, to install it in place, press the left zero right fire wire, turn on the power supply, and you can use it.

The schematic diagram of the rail socket installation is as follows:

Tools: Rail sockets, drills, wires, power cords, adapters.

1. Punching. The terminal of the track socket is generally on the left side, the right side is not set up with the outlet, and the power supply is on the right side, so you need to make an outlet yourself and make a hole with an electric drill.

2. Wiring. The power supply is at the back of the pipeline machine, but because there is a long distance between the track socket and the socket blocked by the pipeline machine, a section of wire needs to be connected.

3. Determine the location.

The track socket can be high or low, and you can come according to your own charging habits. Then take out the tape measure to balance the left and right, trying to keep the left and right on a horizontal line.

4. Upper screws.

Then screw the backplate. If it is a hard material such as slate tile, you can use non-marking back glue, which eliminates the trouble of punching holes and screws.

5. Connect the power cord.

Remember to turn off the power switch before you start connecting the power cord. It is recommended to connect a 4 square power cord, so that the rail lift socket can exert its maximum carrying power.

6. Done. Next, just snap the rail socket to the backplate, take out the adapter and clip it to the rail socket and you're done.

Summary Track sockets.

To put it more specifically, this is a built-in or hanging (surface-mounted) removable power base. And let's put it bluntly, it's actually a plug strip, but its main technical content is in the connection and protection technology.

Can the rail socket be reversed?

To put it more specifically, this is a built-in or hanging (surface-mounted) type removable power base. And let's put it bluntly, it's actually a plug strip, but its main technical content is in the connection and protection technology.

Yes, dear.

I have a built-in track socket, because the wire reservation is too short, the electrician installed the track socket panel upside down, but the panel is labeled with a front-facing upside, I don't know if it will be dangerous to install it upside down.

There will be no danger.

The panel of the rail socket states that the direction of the arrow on the panel and the direction of the adapter must be the same, and now it is in the opposite direction, will it cause a short circuit? Will it burn out the socket? Will it break the appliance?

Then you don't have to get it yet, wait for the electrician to take a look.

Electrician, but I see that he seems to have not installed it before, and he is afraid of trouble and does not want to reinstall the wiring, I am not at ease, after all, the electricity thing, safety first, so come to the Internet to ask professionals.

You can get it. You're afraid of danger.

Just let him get it.

Because he doesn't want to rewire, re-install according to the instructions, I want to find the reason why I can't reverse up and down, I want to know the reason why I can't reverse up and down, in order to convince him, please give me the dangers of reversing up and down the track socket.

There is no danger, the home is used AC electricity, a neutral wire, a live wire, and the electrical equipment is useless. However, if there are electrical appliances at the lower level of the socket, it may be dangerous, because some electrical appliances install the switch in the live wire. The L marked on the socket indicates that this binding post is connected to the live wire, and N means that this binding post is connected to the neutral line (that is, the left zero and the right fire are said.

It can also be used if it is reversed, but if the electrical appliance is a single-stage switch, when it is reversed, the electrical appliance will only be turned off and the zero line will be turned off, which reduces the safety of electricity, so it should be wired according to the original L and N signs.

There is no danger, the home is used AC electricity, a neutral wire, a live wire, and the electrical equipment is useless. However, if there are electrical appliances at the lower level of the socket, it may be dangerous, because some electrical appliances install the switch in the live wire. The L marked on the socket indicates that this binding post is connected to the live wire, and N means that this binding post is connected to the neutral line (that is, the left zero and the right fire are said.

It can also be used if it is reversed, but if the electrical appliance is a single-stage switch, when it is reversed, the electrical appliance will only be turned off and the zero line will be turned off, which reduces the safety of electricity, so it should be wired according to the original L and N signs.

Thank you! I learned about the safety of electricity.

The rail socket adapter is universal.

With the rail socket, you only need to install the socket module on the track, with the power strip? Inexistent. In addition, the rail socket can be customized in length according to needs, which is also a very intimate design.

Rail socket, can be adapted to a variety of different types of sockets, only need to insert the socket into the track, rotate 90° clockwise, LED light on, it means that it is powered on, ready to use.

When not in use, twist it counterclockwise, and the socket will be powered off and the LED light will go out. The track socket is installed at home, which solves the electricity problem of many electrical appliances, and the appearance is high, which is suitable for installation in the living room TV background wall, bedroom, study, kitchen, balcony, and is an ideal choice for new house decoration.

The socket is the top priority of water and electricity decoration, and reasonable socket decoration is very important. The ideal socket decoration should not take up too much space, but also meet the needs of the line. But in reality, there is often a dilemma, many people often complain that too many sockets in their homes are aesthetically pleasing, but too few are often insufficient.

With the development of science and technology, in order to meet the needs of consumers, major manufacturers have created a new type of socket called a rail socket, which is different from the traditional plug-in board. Today, PCHOUSE will briefly introduce to you where the track socket is suitable for use.

1. TV cabinet: TV cabinet is often the location of large pieces of furniture such as family speakers, TVs, wifi, etc., and there are usually a lot of cables hidden behind the TV cabinet, such as TVs, speakers, routers, set-top boxes, and various household appliances, and track sockets can solve the problem of cable entanglement.

2. Kitchen: This wall in the middle of the range hood and sink is very suitable for installing track sockets, and the kitchen needs to use a lot of household appliances, such as rice cookers, electric cookers, microwave ovens, ovens, kettles, and track sockets in the kitchen to reflect its value. 3. Study:

Most of the students in the study room will have a computer, if it is a desktop computer, there will be more power cords, and you must use a power strip to solve the problem, as well as a desk lamp, humidifier, etc., which can be solved with a track socket.

4. Pantry living room: The pantry is usually a large long table, on which there are all kinds of kitchen electricity, kettles, microwave ovens, coffee machines, water dispensers, etc. are lined up, and the countertop is always wet, and it is not safe to use the socket.

5. Hair salon: The layout of the hair salon is also more seats, and all kinds of hair dryers and tools used for hair styling need a lot of sockets.

To sum up, as long as you need to use a large number of sockets, you can consider purchasing rail sockets to use.

Kiss! Hello, happy to answer your <>

The installation steps of the pro-track socket are as follows: 1. Install one end of the spring buckle into the edge of the track first. 2. Pull to the right along the horizontal edge of the track so that the other end of the installation buckle is flush with the track.

3. After the other end of the buckle is flush, press down the module to make it completely loaded into the track, and finally power on to detect it to see if it can be used normally. A track is a route made of strips of steel for trains, trains, etc. It can also be the route of celestial bodies through the universe.

Also called trajectories. The route of the movement of the object refers more to the burning of the eyes with certain rules, such as the movement of electrons in the atom and the operation of artificial satellites have a certain orbit. Rules, procedures or scope to be followed for action:

Production is already on track. I hope mine can help you! Do you have any other questions?