Ask what you do with the paper that you ve printed

The other side of the used paper can also be used to print documents that are not open to the public, and the paper can be purchased after both sides have been used.

The office tries to revise the manuscript on the electronic ** to reduce the consumption of paper.

Review carefully as you type so as not to waste paper.

Then classify and dispose of it, if it is a confidential document, of course, it must be destroyed to avoid leakage; If it is a general document, it can be used again, and if it can't be used, it will be sold as waste paper. Make the most of it.

Make a draft. Fold it into the shape of a boat to throw out garbage.

Printed paper, no matter what, if the conditions are sufficient, you can buy a shredder, shredder market ** are about 1000 yuan, a little better can be broken staples, etc., shredders are currently broken into strips, granules. Shredded paper can be sold as well. In this way, no secrets will be leaked, and secondly, no resources will be wasted!

Of course, if it is a printing room, the amount of paper used is relatively large, and there will be a lot of waste, and the draft can be played on the second side, but don't crumple it, so that inkjet and laser printers are easy to jam.

There is also a teaching to you when choosing paper, if it is a photocopier at least 70g or more (some copy paper on the market is less than g), an all-in-one machine of more than 60g, the mimeograph machine is now used less, too thin paper is easy to jam, and there is a lot of waste (several sheets at a time)!

You can donate to the kindergarten children to draw pictures and they don't know what is confidential. My niece's kindergarten asked parents for this kind of free paper. Moreover, donating used paper to our future flowers shouldn't be considered a waste.

We usually shred it in a shredder after the double-sided ones have been used up, and then we sell them!

Crush it into powder, add water at 1:2, mix well, then put in some lime, spread it flat on a woodblock, dry it, and a piece of paper is born again!

I think it's better to be scratch paper, because paper is made of wood after all

Use it on both sides, and when it's not used, use a shredder to break it, sell it to the scrap ** station, and everything is OK

Our company's shredding is directly shredded, shredders. It's easy and fast.!

You're right.

The differences between color inkjet printing paper and plain paper are:

Ordinary paper is generally 70-80 grams, mainly used for printing or copying documents.

Color inkjet printing paper is generally between 100-150 grams with coating The effect of printing color pictures is better, and it is an economical and practical paper between ordinary paper and ** paper, and color ** paper.

Ordinary paper and color inkjet printing paper (referred to as color inkjet paper) can be printed in color** It's just that ordinary paper has poor ink absorption ability, and the color picture is not as good as color inkjet paper.

The printing volume of the ink cartridge is inversely proportional to the coverage rate, the higher the coverage rate, the less it will be printed, and the amount of ink cartridges of each manufacturer is not the same, see the detailed description of the product;

The length of time to print out the file is very related to the ink paper, generally using pigment ink, the printed file ** storage time is longer, but also waterproof Dye ink storage time is relatively short, not waterproof!

If the system pops up a "printer out of paper" prompt when performing a print test or printing target document operation, you can eliminate this prompt as long as you insert the printing paper correctly; But in fact, you may often encounter a problem where the printer is out of paper despite the fact that the printer is running out of paper when the paper is clearly placed in the paper slot. Why does the printer always prompt the printer to run out of paper when printing? But I still prompt like this when I put on the paper, why?

There are several main reasons why the printer always prompts "out of paper". (1) The printer connection cable or the parallel port of the computer is damaged, resulting in a shortage of paper prompt. Workaround:

Replacement cables or parallel ports for troubleshooting. (2) Driver error, sometimes the printer driver is corrupted, which may also cause this phenomenon. Workaround:

You can reinstall the printer driver or upgrade the driver. (3) The printing paper sensor is polluted, that is, the photoelectric sensor in the printer paper feeding system is damaged or its surface is covered with dust, resulting in the paper feeding system can not accurately transmit the paper presence signal to the printer control system. Workaround:

Open the printer's housing, then carefully disassemble the paper roller at the paper feeding system, and check whether the surface of the photosensor is covered with dust, if there is dust, you can gently wipe it off with soft cotton gauze. Then try to print to see if you can eliminate the false out of paper prompt, if the printer can automatically eliminate the false out of paper fault at this time, then it proves that the fault is caused by dust; If this method cannot be solved, it is likely that the photoelectric sensor in the printer's paper feeding system is damaged, and professional maintenance personnel need to be hired to solve the fault.

When a lot of paper is coming into the printer, it may be caused by the printer being operated abnormally or malfunctioning, or it may be that there is a problem with the printer's sensor that prevents the printer from stopping the paper feeding operation in time. In this case, we should take the following steps:

First, turn off the printer immediately and remove the paper from the printer at the same time. Excessive paper feeding can cause damage to the internal parts of the printer, such as gears, drive belts, print heads, etc. Therefore, it is necessary to clean the inside of the printer in time to ensure that it works properly.

Second, check the cause of the printer and check whether the printer is faulty. Sometimes, the printer feeds too much paper because there is a problem with the printer's sensor that prevents the paper feeding operation from being stopped in time. At this point, we need to disassemble the printer case, clean and inspect it to restore the normal operation of the sensor.

Finally, to avoid such situations, we should use high-quality printing paper, place and set the paper correctly, and check the condition and quantity of paper before printing to reduce possible errors. In addition to this Huaiyan, it is recommended to clean the printer and replace consumables regularly to ensure the long-term stable operation of the printer.