When customizing the whole house, how do you think you should choose a good board?

1.Particleboard can be divided into imported particleboard and domestic particleboard. From the cost point of view, the particleboard is relatively close to the people, the cost is also very low, and most families can afford it.

Kang board, Osson board, and formaldehyde-free board are essentially particle boards, but the names are confused. Many people say that it is not recommended to use particleboard, because the cost performance of particleboard is relatively low, it is not suitable for cabinets with water, and the force strength is relatively low. But for families with a short budget, you can also choose a slightly higher quality particle board, which is also quite diverse in style and color.

But if you have a budget, it is recommended that you line up the particle board in the back row.

2.Multi-layer boards can really make their debut in the C position. Its cost performance is the highest among the three panels, don't worry about environmental protection and quality, and there is also a quality lever!

The waterproof load-bearing is also good, and it can't beat the particle board and ecological board at all. The all-green ecological board is made of solid wood substrate with strong bearing capacity, good nail holding and good air permeability, with wear-resistant, scratch-resistant and corrosion-resistant decorative paper imported from Germany, bonded with MDI ecological glue without aldehyde addition, and matched with German Ruihao environmental protection edge banding, which is firmly resistant to collapse and is accurately and intelligently manufactured by German IMA intelligent equipment to meet international NAF standards.

3.Quanyou also adds composite antibacterial agents to furniture materials to make the board antibacterial and achieve daily antibacterial effect. In custom furniture, a lot of hardware is used, such as screws, hinges, etc.

Whether these fittings are firmly bonded to the plate reflects the nail grip of the plate. Generally speaking, it is whether the nail hole is easy to fix, and whether the nail is easy to loosen and fall off after entering the board.

4.The plate with good nail grip has a strong fixing force on the nail, and the nail is not easy to fall off after long-term use, which can bear greater weight, and the nail hole of the nail can also be used repeatedly. What about the aesthetics and smoothness of the surface of the sheet?

When you buy it, you can touch the surface of the plate with your hands to feel its smoothness. If you can clearly feel the puncture feeling of the plate, it means that the process level of the plate is poor, and it is not recommended to buy it. Avoid using a large number of adhesives, environmental protection, load-bearing walls, safe, stable and durable, but its disadvantages are poor moisture resistance, easy deformation, complex material selection, and high cost.

First of all, we must choose high-quality materials, it seems that there is no greed for cheap, and then we should also pay attention to the problem of cost performance, to choose some big brands, or you can choose some imported from abroad, and the style and quality of the plate also need to be investigated.

When customizing the whole house, I think we should choose a safe, no odor, good quality, durable, easy to clean board, in the selection of board quality, try to be E1 level or E2 level.

Choose according to your own needs, try to choose solid wood, such boards are stronger, more durable, and have a longer life.

The specific decoration of the house can be calculated here, just enter the area + city, calculate the decoration in 3 seconds, know the real ** in advance, and easily grasp the decoration company: [Click here, free decoration**].

E1 grade environmental protection board is mainly composed of wood-based panels and plywood, and its formaldehyde emission is far lower than the national standard, which is harmless to human health. In addition, the E1 grade environmental protection board has high strength, good wear resistance, not easy to deform, and long service life. Its surface is smooth, the color is uniform, and various surface treatments can be carried out, such as painting, veneer, film, etc., which is beautiful and generous, and suitable for various decoration styles.

In the market, the ** of E1 grade environmental protection board varies due to different brands, specifications, thickness and other factors. Generally, it is between $100 and $300 per square meter. Specifically** needs to be consulted and compared according to actual needs and market conditions.

When choosing a board, in addition to considering the best and environmental performance, it is also necessary to consider the practicality and decoration style of the board. For example, if you have small children or elderly people in your home, you can choose a surface treated sheet to prevent scratches. If the decoration style of your home is more minimalist, you can choose a board with uniform colors and simple lines.

In general, E1 grade eco-friendly board is an ideal choice for whole house customization, which is both environmentally friendly and practical, and can meet the needs of most families.

Finally, it is recommended to recommend our "Tuba Rabbit", Tuba Rabbit has 110,000 decoration companies and first-class businessmen in his hands, and the direct sales of building materials are affordable. Tuba Rabbit is selected for decoration, and Tuba Rabbit can accompany the signing of the contract for free, "decorate first and then make payment", reducing the worries of the owners. For more decoration information, welcome to visit:

Click to enter, professional customer service free consultation good company].

The whole house is customized with panel furniture. The plate type is mainly paint-free board. Among them, there are ecological boards (solid wood), multi-layer boards, particle boards, and MDF.

What to choose according to their own needs, nowadays, choose to use more of this side to do custom wardrobes, most of them are made of solid wood particles paint-free board, because this board is relatively cheap, and convenient for factory mass production, so custom factories like to use! However, the water absorption expansion rate is relatively large! Mostly shelves.

As for what kind of plate is good, it should be divided into two categories, the first category is panel furniture, but the furniture should be divided into the quality of the plate, in fact, the difference is not too big, it depends on the environmental protection degree of the plate, the premise is that there is no absolute environmental protection, but relatively, and the later stage should be based on the workmanship of the plate and the degree of environmental protection of the paint. First of all, the whole house customization is made in the factory, not in the customer's room, that is, we make it on site, which invisibly brings great benefits to our site cleaning and the environmental sanitation of the site! At present, the boards used by whole-house custom merchants are usually particle boards, and there are also multi-layer boards, which are relatively much more expensive.

However, the use of particle board is definitely not very environmentally friendly, because particle board is generally broken wood and then glued with adhesive, plus the edge sealing is relatively tight.

According to the forming classification method, it can also be divided into doubtful wood board, plywood, fiberboard, carved board, fireproof board, particleboard, MDF, blockboard, melamine board, broken wood board, wood wool board, and wood-plastic board. In the past, it was colloquially called "particleboard", which was made by pressing wood chips (wood chips). However, due to the fact that the market is flooded with too many counterfeit and shoddy products, waste paper, grass and wood garbage are all mixed together, ruining the reputation of particleboard, in order to reverse the situation, the merchant adopts pure wood to upgrade the product, and uniformly rename it solid wood particle board.

The choice of solid wood particle board is because it is easy to land, because the manufacturer generally does not change you for solid wood, and even if it is changed, it can only be pine, cedar, rubber and other materials, and the texture is not good.

Solid wood multi-layer boards, ecological boards, particleboards, fiberboards, and blockboards should be used, which are often very good when used, so in this case, you need to buy them yourself, and you need to buy the right board for yourself.

Water-based boards are better, because this kind of boards are cheap and affordable, and the quality is very good, and it is very good when decorating.

If the budget is very large, and the pursuit of quality is more, you can choose solid wood multi-layer board.

I think I might choose to ask a professional, and I think only they will be able to see which is good.

Particle board, after the wood is crushed into particles, it is processed with glue, high pressure and a series of processes. The middle layer has the largest particles, and the particles on both sides are relatively small. The flaky particles of the middle layer are directional, which also determines the stability of the plate.

Solid wood particle board has overcome some of the shortcomings of natural wood because of its non-deformation and stable physical properties. However, particle board has its disadvantages: the integrity is not as good as that of the ecological board, it is difficult to make arcs and shapes, it contains a large dose of industrial glue, and the formaldehyde emission is high.

The eco-board, also known as melamine veneer, puts the paper with different colors or textures into the soaking solution of the resin adhesive of the eco-board, waits for it to dry to a certain extent, and then heats it, lays the paper on the surface of the bubble board, moisture-proof board, or other hard fiberboard, and finally forms a decorative board after hot pressing. Characteristics of ecological board: fireproof and moisture-proof, without the high formaldehyde, easy bubbles, delamination and cracked edge phenomenon of ordinary boards.

From the consideration of family application and environmental protection, basically based on solid wood ecological board, but most manufacturers still use solid wood particle board as the base material of the cabinet, if you buy the board back to find a carpenter, it is recommended to choose solid wood ecological board, the product structure is stable, the product shape is beautiful, and the advantages of environmental protection can create an environmentally friendly living environment. The ecological board is much higher than the particle board, but there are many shoddy ecological boards made of urea-formaldehyde glue, which still has a lot of formaldehyde, which is not good for the body. The above personal advice is for reference only!

I would choose to go to a big furniture store to buy panels, where it is not easy to buy defective products.

Choosing a plate is the first step in customizing it for the whole family. The plate is different according to the different plates required for the cabinet doors and cabinets. Each plate has its own advantages and disadvantages, so you can choose the board according to your favorite style.

What you like is the best. Let's talk about the advantages and disadvantages of several plates.

1.Solid wood particle board (particleboard): Solid wood pellets and adhesive are mixed together for hot pressing.

It is often used in cabinet door cabinets. Advantages: mature technology, uniform materials, stable performance, good deformation ability, and high cost performance, which is also the reason why major brands mainly push particle boards.

Disadvantages: It is easy to expand in a humid environment, and it is not suitable for cabinets and bathroom cabinets. The load and grip are weaker than multi-layers, so it is recommended to use multi-layers in relatively wet places.

He is wardrobes or shoe cabinets and other cabinets can use particle boards. Particle board is divided into domestic particle board and imported particle board, and imported particle board is higher than that of domestic environmental protection. 2.

Five pine boards: It belongs to the same particleboard as the particle board, and the five pine boards are imported from Europe and pressed with all pine shavings. Generally speaking, if there are many cabinet doors, the cabinet can also be used.

Advantages: It fully complies with the EU E0 level environmental standards, and is also widely used abroad, and the stability and grip are also better than that of particle board compared with natural wood. Cons:

The technology of domestic five pine boards is far lower than the maturity level of foreign countries, so it is best to import five pine boards. Of course, it is more expensive on **.

3.Solid wood multilayer board (also known as plywood or plywood): wood is cut into thin slices, glued into thin sheets, and hot-pressed.

Cabinets and doors can be, there are a lot of cabinets, kitchens, bathrooms, cabinets and other wet locations can also use multi-layer boards to make cabinets, large cabinet doors are best not to use multi-layer, the door panel is too large and easy to deform. Advantages: good moisture resistance, better grip and load force than particle board, more solid wood components, but cheaper than pure solid wood.

Disadvantages: It cannot be shaped, and the process is complex, so the production cost is a little more expensive than particle board. 4.

MDF (MDF or fiberboard): Crushing the wood, adding the fiber type to the adhesive and pressing. It is mostly used for cabinet doors, and is generally not used to make cabinets, which can be shaped.

Advantages: Wood is easy to shape, as long as the board has a concave and convex shape, most of them are MDF. Cons:

The moisture is weak, the water absorption is easy to expand, the bridge is also large, and the environmental protection coefficient is low, so it is recommended to only use MDF as the door that needs to be shaped. 5.Logs:

Both cabinets and doors can be made, mostly for door modeling. Advantages: Pure logs can be made in a variety of forms, the texture is better than MDF, and the environmental protection coefficient is also high.

Cons: High.

Summary: If the budget is not much or it will not take a few years to complete the wardrobe, it is recommended to choose solid wood particle board, and those who have sufficient budget and pursue the quality and quality of the house can also choose solid wood multi-layer board. MDF, as mentioned earlier, only needs to be modeled.

For low to medium prices, you can consider the following combinations. The most economical collocation: the most environmentally friendly collocation of domestic particle board cabinets and domestic particle board door panels (plates):

Multi-layer cabinet domestic particle board door panel (board) multi-layer cabinet density panel door panel (modelable). The pursuit of quality can be considered with: multi-layer cabinet entrance particle board (board) multi-layer cabinet pure log door (high modeling**).

To choose environmentally friendly boards, if the economic conditions allow, you can choose solid wood, the problem that needs to be paid attention to is to choose the brand of the brand, the general after-sales and quality are guaranteed, let the staff do the design drawings in advance, the reasonable use of space, to ask the relevant personnel charges are charged according to the actual area or projection area.

When choosing whole-house customization, you should choose a big brand of boards; When choosing, we must pay attention to choosing a large brand, choosing the most suitable one, choosing the most suitable one, choosing imported plates, and choosing multi-layer plates, which are more environmentally friendly.

Panels can be selected according to environmental friendliness. It is necessary to pay attention to the ** of the plate, the installation method of the plate, the durability and anti-slip of the plate, and also pay attention to the waterproofness of the plate, as well as the anti-corrosion length of the plate.