There is a gap between the large wardrobe and the wall, what are some ways to repair it?

In many homes, there is a gap between the wardrobe and the wall. There are many reasons for this phenomenon, it may be that when the house was renovated, the decorator did not smooth our walls, resulting in uneven walls. Once we put the cabinet there, the cabinet will not fit perfectly with the wall, which will lead to gaps over time.

If there is a large gap between the wall and the cabinet, we can ask a professional decorator to smooth the wall. This can be regarded as a one-and-done solution, or it can be said to deal with the problems left over from the original repair of the house. After the wall is smoothed, the wall and the cabinet will fit very well, and the gap will disappear, this method is only suitable for the situation that the gap is particularly large and the wall is very uneven.

If we feel that it is too much trouble to redecorate, we can fill it in with some decorations. Some people find this method time-consuming, laborious, and requires a lot of money. A simpler way to do this is to buy some wooden boards of similar color to the cabinet, and place some handicrafts or flowers on top of them to fill in the gaps.

This makes our overall layout look more aesthetically pleasing and costs less money.

To sum up, we have to choose the method of repairing the gap according to our actual situation. If we want to strive for perfection, we can ask a professional decorator to smooth our walls. However, this method will be more time-consuming and energy-consuming, and requires more money, if you don't want to use this method, we can also buy some decorations such as flowers to decorate the gaps, which can also improve the overall aesthetics.

In fact, this gap has no effect, if you have to repair it, you can measure the distance first, and then use bricks against the wall to build a layer.

You can repair it yourself, but it is still recommended to find a professional to repair it, so as not to affect the appearance and cause it to look bad.

Scrape the gap between the wardrobe and the wall with putty to scrape out the width of this gap, preferably scraped into a figure-eight shape, wide on the outside and narrow on the inside, and then plug the gap with dry powder of gypsum blocks.

It is normal for wardrobes and walls to have gaps, because the decoration cannot be flawless, and the remedy is to add a little glue or something else to fill the gaps.

It may be because it was not handled well during the previous decoration, and you can call ** to let a professional person deal with this situation.

If you find that there are gaps, you can find a professional decoration personnel to deal with it, after all, it is not as good as a professional one.

You can choose to use a special glue for decoration to fill the gap between the wall and the wardrobe, but generally this situation can be left alone.

If the gap is not very large, you can use glue to supplement it, and you should use a suitable color to fill it, otherwise it will affect the appearance.

The first one is the problem of wall decoration workers, the uneven height of the wall is significantly the ground leveling is not in place, the bricklayer master must wipe the mortar leveling, and then the painter will make up. The latter is the problem of furniture customization manufacturers, and the flatness of the wall was not measured before making a wardrobe. Nowadays, when installing wardrobes, there are all levels, and you can understand that the wall is straight and curved, and it goes without saying that the measurement work is not done well.

One is: first fill the gap with foam glue, which has the effect of preventing cracking, then scrape it flat with putty powder, and then paste a circle of anti-cracking gauze, and finally use putty to polish and polish the paint.

If you want to do it yourself, at the same time, you want to be easier to use and be able to fill the gap with structural adhesive. The structural adhesive is good enough, and the gap is easily repaired. However, after a period of application, the structural adhesive will turn yellow and black, and the durability and aesthetics are insufficient.

Another way is to use wooden corner strips to block the areas with gaps, and then change the nailing gun to nail the wooden corner strips, so that the gaps can be blocked, and it is not easy to affect the appearance. The back wall is not vertical. This kind of thing is more common in everyone's wardrobe after the assembly, there are gaps of different sizes between the back panel of the wardrobe and the wall.

The most common situation is that the upper gap is small, the lower gap is large, or the lower gap is small and the upper gap is large. This shows that the wall is not vertical, and the vertical wall is not solved when the interior decoration is done. There is a deviation in the flatness of the ground.

In other words, our wardrobe is assembled by floor-to-ceiling, and after floor-to-ceiling assembly, the wardrobe is skewed due to the uneven road surface, so that there is an uneven gap with the middle of the wall. The wardrobe is not installed in place. The wardrobe installation is not in place, which means that the wardrobe customized by the goods is required to be assembled against the wall, but in the case of specific assembly, it is not assembled by the wall.

In fact, the main reason for this kind of problem is that there is a problem in the case of the custom size of the wardrobe.

You can use a sewing agent to fill this gap, which will look more beautiful and is not prone to problems.

You can fill it with plaster blocks, because that's what I have in my house. Then I'll mix it with a quick mix of plaster and dry powder to fill it in.

It can be filled with some foam glue, so that the wardrobe can be better fixed on the wall, not easy to collapse, and can also better fill the gaps.

It may be caused by the measurement, it may be caused by the production, for example, the cabinet that should have been 1.8 meters is actually only 1.7 meters, then there will definitely be a gap of 1cm after installation, and this gap is uniform up and down, equal width. The former is the problem of the wall decoration master, the uneven wall is obviously not leveled in place, the mason master needs to wipe the mortar leveling, and then the painter will continue to make up. The latter is the problem of custom furniture manufacturers, and the flatness of the wall is not measured before making cabinets.

It is a custom wardrobe, the wardrobe is measured according to the floor tiles, to the position of the top, confirm the height of the wardrobe, width, according to the indoor area, a few centimeters more, a few centimeters less, the custom wardrobe is not processed on site, and a slight error is normal.

If you want to do it yourself and want to make it simpler, you can fill the gaps with glass glue. The glass adhesive is good enough, and it is easy to repair the gaps. However, the glass glue will turn yellow and black after a period of use, and the durability and aesthetics are not enough.

And will be a certain measurement of whether the wall is vertical, if it is found that the wall is not perpendicular up and down, will communicate with the owner or the person in charge of the decoration how to deal with the wall, and then the order will be placed.

The suit door is not installed, and the gap in the upper part of the wall on the right side is very easy to handle, so there is no solution. In the picture above, the verticality of the façade was initially popped up with a baseline line, and the ceiling was integrated with three lines at one end of the wardrobe, where the walls should be leveled with plaster as a whole. In the early stage, after the master's wall treatment is complete, the re-ruler treatment will be carried out.

Make sure every size fits tightly. When reading the ruler, try to reduce 3-5mm at the full size position to ensure that the combined size of each board after splicing is larger than the actual size of the drawing.

The expansion and contraction ratio of thermal expansion and cold contraction is not the same, and if you use putty treatment or glue, it will definitely crack in the future. If it is in the decoration process, you can first use foaming agent to hook the joints, then use putty to sew the seams, and finally the brusher. If it is a renovated house, the custom wardrobe can only be seamed with glass glue.

Personally, I think that if there is a gap between the customized wardrobe and the wall, it needs to be treated at this time, and you can ask a professional person to deal with it, which will be more beautiful.

Answer: Hello: If there is a gap between the customized wardrobe and the wall, the overall appearance will affect the aesthetic effect. How to deal with the gap between the custom wardrobe and the wall? PChouse will take you to find out.

1. Scrape the width of the gap between the custom wardrobe and the wall with a putty knife, and scrape it into a figure-eight shape, with a wide outer width and narrow inside. 2. Use dry powder gypsum blocks to plug the gaps, the filling depth is not less than 30-40mm, do not fill with the wall, brush 108 glue at the lower gaps than the wall and paste the glass cloth or kraft paper strips. 4. Scrape 821 putty 2-3 times to be level with the original wall, and polish it with sandpaper after drying.

5. Configure wall paint, brush the sample first after the paint is configured, and contrast with the wall color after drying, the color is close, and the color difference is not large, so it can be painted.

We should decorate it with some small ornaments, so that it can also cover up this flaw, for example, putting some fake grass and flowers in ** is also very good-looking you.

When you find a gap, the best way is to make plaster lines, which will not only decorate, but also make the wardrobe and wall look more harmonious.

If there is a gap between the wardrobe and the wall, then it may be that the wardrobe or the wall is not flat enough, and the wall needs to be filled.

The gap should be plugged with putty or foam, and there is no need to make a big fuss. This will not compromise on aesthetics.

You can fill the gaps with some filler and then apply a similar paint to the outside so that they don't look out.

In such a situation, you can choose some good materials to fill these gaps so that it will not look so strange.

The gap between the cabinet and the wall can be treated by gluing and filling, and unilateral edge banding. Glass glue filling masking.

If the gap is too large, this problem is generally caused by inaccurate measurement, and the manufacturer can be required to use the cabinet plate of the same material to do unilateral edge banding, and then cut and fill according to the size of the gap, and finally do glue treatment.

If there is an obvious gap between the custom furniture and the wall, and the size of the gap is different, the root cause is that the wall is not straight. Usually, according to the situation of the site, the manufacturer will seal the gap between the cabinet and the wall with wooden strips, and select the corresponding glass glue according to the color of the furniture.

Introduction to glass glue

Glass glue is a commonly used adhesive in the home, consisting of sodium silicate and acetic acid, as well as organic silicone.

Glass glue is mainly divided into two categories: silicone glue and polyurethane glue (PU), which can be divided into neutral glass glue and acid glass glue according to its performance, of which acid glass glue is mainly used for general bonding between glass and other building materials, and neutral has a wider range of application.

Glass glue is a material that bonds and seals various types of glass with other substrates. There are two main categories: silicone glue and polyurethane glue (PU).

Silicone glue sealant - is what we usually call glass glue, and is divided into two kinds of acidic and neutral glue (neutral glue is divided into: stone sealant, mildew sealant, fireproof sealant, pipe sealant, etc.).

1. If the gap between the wall and the cabinet is not very large, it is recommended to use colloids for aesthetic filling. 2. If the gap between the cabinet and the wall is very large, it is generally caused by inaccurate measurement during the decoration at that time. It is best to ask the cabinet manufacturer to use copper cabinet panels, carry out unilateral edge sealing treatment, and then cut according to the size of the gap.

The gaps in the cabinet are filled with other plates, and then glued to close the gaps. Relevant knowledge popularization: 1. If there is a very obvious gap between the customized cabinet and the wall, and the size of the gap is different, then the fundamental reason is that the wall of the room is uneven, usually the manufacturer will adjust the furniture according to the situation of the site, so that the gap between the furniture wall is sealed.

And according to the color of the furniture, choose the corresponding glass glue for filling. 2. If the gap is due to the wall, you can also mix putty powder and water into putty in a certain proportion to make up for the wall, so that the wall is in a balanced state, so that the gap between the cabinet and the wall will disappear. 3. The so-called gap here is due to the fact that the closing strip is installed in the later stage, one side is installed on the wardrobe, and the other side is connected with the wall, which leads to the gap between the connections between different materials.

1. Glue and scrape putty.

The best way is to glue, because the elasticity of the sealant is better than my stickiness. The second is to scrape putty, but scraping putty is not recommended, because the texture of putty is hard after drying, the wardrobe and wall may be deformed, and there may be gaps and falling off in the later stage of putty.

Second, the gypsum line.

If there is a gap between the top of the wardrobe and the wall, then it is recommended to walk a gypsum line, which has better sealing, and the gypsum line is versatile and will not affect the overall decoration effect.

Measure the width of the lower gap, then cut out a wooden strip that is the same width as the gap and the same as the wardrobe, and then nail the wooden strip to block the gap. You can also use glass glue, the viscosity of glass glue is better, brush the glass glue to the gap, it will block the gap, and it will not affect the appearance.

We should spray some sewing agents, and we can choose some beautiful colors to match our wardrobe, so that we can do it.