Why doesn t the manufacturer put the film on the factory when the mobile phone leaves the factory?

For the vast majority of people, mobile phone film is the first step after the arrival of a new phone. But for Xiaobai, mobile phone film is a very difficult thing, not only not good paste but also delay time, if you go outside to find someone to stick the film, the cost of five cents of the tempered film at least charge you 10 yuan, very cost-effective.

So the question is, since everyone is sticking the film, why don't the manufacturers put the film in advance when the mobile phone leaves the factory? Today, Chubby will talk about the greasy in this!

Cost factor. <>

The quality of tempered film is uneven, and the cost gap is also very large, ranging from five cents to more than ten yuan. It is very embarrassing for manufacturers, if you stick a film that costs only five cents, not only the use experience is very poor, but also affects the brand image. If the factory comes with a film that costs more than a dozen yuan, then the cost is too high.

There are so many types of films.

As the form of mobile phone screens changes, the types of films are also increasing. Only tempered film has: ordinary tempered, full-screen tempered, half-screen tempered, glass + plastic, full-screen hot-bending tempered glass film.

Each consumer has different requirements for mobile phone film, which cannot meet the needs of all kinds of people.

Affect word-of-mouth and sales.

At present, most mobile phones use curved glass screens or even hyperboloid screens, which have been greatly improved in terms of look and feel, but due to the different curvature of the edge curve of each mobile phone, the tempered film has no plasticity, resulting in white edges after the film.

If you use such a mobile phone for publicity, it will greatly affect the brand image of the mobile phone and the reputation of users.

Moreover, the position of the sensor and earpiece on the forehead of the mobile phone will also become ugly, and the manufacturer will definitely not want to do such a thankless thing. Why do you think mobile phone manufacturers don't put the film on it in advance?

Tutu Tutu Kaka listens to him even more.

The film that is attached to the mobile phone factory is PET film.

The film pasted by the mobile phone factory is usually a PET film, which is also known as polyester film, which is a plastic film with high transparency, flexibility, scratch resistance, waterproofness and durability.

This film is suitable for making mobile phone screen protectors, which can effectively protect the mobile phone screen from scratches, pollution and damage, and prolong the service life of the mobile phone.

In addition to PET film, some mobile phones will use different materials such as glass film and TPU film to adapt to the needs and preferences of different consumers.

Features of tempered film:

High transparency: The tempered film has high transparency, which can maintain the clarity and brightness of the mobile phone screen without affecting the display effect of the screen.

High hardness: The toughened film has been specially treated, and the hardness can reach 6-9h, which can effectively prevent the mobile phone screen from being scratched and worn.

Anti-fingerprint: The surface of the tempered film adopts special treatment, which can effectively prevent fingerprints and oil stains, and keep the screen clean and transparent.

Anti-glare: Some tempered film surfaces are treated with anti-shirt scattering glare, which can effectively reduce screen reflection, reduce the glare of the screen, and protect the eyes.

Easy to install: The tempered film is easy to install, just stick it on the screen and won't leave bubbles or wrinkles.

High durability: The tempered film has high durability and long life, which can effectively protect the mobile phone screen and prolong the service life of the mobile phone. <>

Yes, but it's just a very thin nanofilm.

Newly bought mobile phones will have a factory nano film, thin does not play a role, but when you first buy a mobile phone, merchants will say that the mobile phone film that comes with it is better, you don't need to change the film immediately, but the nano film is not fall-proof, whether to change the tempered film can be decided according to personal needs.

Mobile phones are generally pasted with tempered film, because they are more drop-proof, and the mobile phone case needs to be purchased a shell that is higher than the edge of the mobile phone, if the mobile phone case is too thin, the edge of the mobile phone is also easy to break.

Good. When manufacturers produce mobile phones, they often bring their own films. The reason is that when the mobile phone was first released, the mobile phone film of many manufacturers had not yet been produced, and the temporary film was pasted in order to prevent the damage caused to the mobile phone by users when using the mobile phone.

The original film of the mobile phone is generally poorly safe, basically not fall-proof, and is a temporary film.

Protective film: After many people buy a new machine, they all know that a protective film is pasted on the screen, but this protection is only partial, and the body of the mobile phone shell is the most easy to wear and tear, and it should be protected, so the protective film of the whole machine is used. The role of this protective film is protection.

The main purpose of this product is to protect the mobile phone case, choose more transparent films, and divide the materials into many grades according to the indicators of adhesive retention, stretching, and wear resistance. <>

The factory film of the mobile phone is of course good, which can effectively protect the wear and tear in transportation. However, he is limited to the protection of the use of the display function normally, which is directly related to its performance, the factory mobile phone film is the manufacturer using the machine film to paste the protective film, mainly for the convenience of transportation and processing, not a special display film, so you need to stick the film yourself in the later stage to be able to display normally. The role of mobile phone film 1, mobile phone film can better protect the screen of the mobile phone from being scratched, when our mobile phone is placed in the pocket, it can not avoid the scratches between the mobile phone and other items, the screen of the mobile phone will be hung out of scratches, and in serious cases, it may cause damage to the mobile phone screen, so the mobile phone film is to protect the mobile phone screen from being scratched.

2. The mobile phone film can also increase the experience of using the mobile phone, some mobile phone films will feel better than the original screen, smooth, some friends who like to play games will choose a good mobile phone to clear the film, which can increase the smoothness of the mobile phone screen and increase the sense of operation. 3. The role of the mobile phone film does not include anti-falling, in fact, the mobile phone film is simply to prevent the mobile phone screen from being scratched, and you should choose some good mobile phone shells if you are anti-falling, and the mobile phone film does not have the function of anti-falling, so you should not try it easily.

When making the factory, the mobile phone film is to protect the screen from being scratched, and the screen surface of the mobile phone is clean when it leaves the factory, and this film cannot be used as a mobile phone protective film.

The original factory brings the mobile phone film to the user, which is also the most common kind. Many people generally choose tempered film, which can effectively protect the user's mobile phone from a heavy fall. And manufacturers can't put different molds on different mobile phones according to everyone's preferences.

Moreover, the mobile phone after the film will have a certain and blurry feeling, which will affect the feeling of the customer when they see the mobile phone. It will not feel particularly clear, and it will affect the desire to buy. Mobile phones without film will be particularly clear and smooth, so it is necessary to arouse the user's desire to buy first.

Therefore, manufacturers want to show the best side of mobile phones to our consumers.

The mobile phone comes with the original screen protector from the factory, in order to avoid the screen protector being bumped and scratched during transportation, the screen protector is covered with a layer of front film with tear-off hand label, please follow the operation guide to remove the front film on the screen protector before starting to use the phone.

Huawei mobile phones will be attached with a layer of screen protector when leaving the factory, the purpose is to protect the screen from scratches and ensure that the screen of the mobile phone is clean when it leaves the factory.

Since the factory film is relatively light and thin compared with the professional screen film, the quality is not very good, and it is easy to wear, so it is recommended that in order to better use the mobile phone, you can change it to a better protective film.

Mobile phone film tutorial:

1. Use a BG cloth (or fiber soft cloth, glasses cloth is also acceptable) to wipe the screen, clean the screen, and thoroughly clean the mobile phone screen. It is best to wipe the screen in an indoor windless and clean environment to reduce the impact of dust on the film, because thorough cleaning before the film is a must, which everyone must know, if accidentally stained with dust, it will directly affect the results of the film, which will lead to bubbles after the film, and the failure of the film. Many poor quality protective films cannot be cleaned up because of the dust entering the film process, which directly destroys the silica gel layer of the protective film, making the film scrapped and unusable.

2. Take the protective film out of the package, don't tear the release film first, and put it directly on the mobile phone screen to get a preliminary impression of the film.

3. Observe the label on the protective film, tear off part of the release film marked with "", and pay attention to avoid fingers touching the adsorption layer of the protective film. Each protective film product is divided into three layers, of which and are release films, which are used to protect the protective film in the middle.

4. Align the adsorption layer of the protective film with the corners of the screen, be sure to make sure the position is aligned, and then paste it carefully. While pasting, tear off the release film, if the film process produces bubbles, you can pull back the film and re-apply. After confirming that the film position is completely correct, tear off the release film completely.

5. Tear off the release film completely.

6. Tear off the release film completely, and wipe the screen with a cloth, and the whole film process is completed.

A layer of screen protector will be pasted at the factory, the purpose is to protect the screen from scratches and ensure that the screen of the mobile phone is clean when it leaves the factory.

Compared with the professional screen film, the factory film is relatively light and thin, the quality is not very good, it is easy to grind, because the factory paste is not very careful, most of them will have bubbles, basically can not be used normally, it is recommended that in order to use the mobile phone better, or tear off the factory film, and then paste a better protective film.

The purpose of applying film to the mobile phone at the factory is to prevent the screen of the mobile phone from being scratched during the transportation process or during the first process, and it is also to ensure that the screen of the mobile phone is clean when it leaves the factory.

Compared with the professional screen film, the factory film is relatively light and thin, the quality is not very good, and it is easy to grind, so it is recommended that in order to better use the mobile phone, you can change it to a better protective film.

Recently, I've been using the more popular iron cloth shirt sapphire crystal film, and I'm stunned by the effect. It's really beautiful in my heart!