What are the benefits of tires being round and why

Because the linear engine, it has not yet been invented, now there are only tanks (old-fashioned), the crawler of the bulldozer is applied a little, and there are many shortcomings The cost of magnetic levitation is too high, and the application surface is too narrow The hovercraft is too dusty on land and is not welcome, and with the development of technology, there will be new wheels

This question from the landlord made me find out.

The sun actually shines, the earth actually rotates, human beings actually have two eyes and a nose, water is transparent, and the wind is actually ...... because of the movement of air

The round ones can reduce the loss of energy.

The distance from the center of the circle to each point on the circle is equal, so when rolling, a parallelogram is always formed on the plane, which makes the operation more stable and safe.

The above are all brain-dead, the landlord asked what is the benefit of the tire tread being round, the tread of the motorcycle sports car is round, because when turning at high speed, especially when the body side deviation is serious, the round tire can ensure sufficient contact area, increase grip, and increase the stability of the body

Because of the following five points:

One. Turn it around.

Two. Turn steadily.

Three. Can be turned continuously.

Four. The contact area per unit time is small and not easy to wear.

Five. To date, no other shape of tire has been found to be more effective than the round one.

Six. It is in line with the exercise physiology of the vast majority of people.

The distance from the center of the circle to each point on the circle is equal, so when rolling, a parallelogram is always formed on the plane, making the operation more stable and safer.

Because it doesn't hurt that tires are round, and modern people haven't reached the point where they can let cars go without tires.

Walk smoothly with little friction.

Round shape is the best shape for compression.

It's about tires, not wheels. The tires are all slaloms, which used to be ring-shaped, but now there are more styles, and the wide flat rectangular rings used in F1 cars are commonly used in other cars.

Absolutely! ``

Otherwise, how do you get out?

square"Gon"It will shake when you get up

There are two main reasons why tires are designed to be round, labor-saving and smooth. The use of wheels is a major advance in the history of human civilization.

The wheels can save effort because the round shape can reduce frictional resistance and increase speed.

Increased efficiency is one of the great advantages of the wheel: rolling replaces the physical weight of humans and animals. When an object is in motion, the center of gravity remains the same, and no power (human or animal) is consumed by the fluctuation of the center of gravity.

The distance from the center of the circle to any point on the circumference is equal, and this equal distance is called the radius. That is: "In the same circle, all the radii are equal."

Therefore, people make the wheel round and make the axle pass through the center of the circle, and when the wheel rolls on the ground, the distance of the axle from the ground is always equal to the radius of the wheel. In this way, the ride will be smooth.

There are two main reasons why the wheels used in the car are designed to be round, which are labor-saving and smooth, because the wheels are designed to be round, which can reduce frictional resistance during driving, and the axle rolls on the ground through the center of the circle, so that the driving will be more stable.

The wheel is made into a circle, and the axle is installed in the center of the circle, and when the car wheel rotates, the distance between the axle and the ground is always equal to the radius of the wheel, so that the driving will be more stable, because the carriage is installed on the axle of the car, and only when the wheel is in a state of smooth operation, the carriage will be more stable.

The round wheels can reduce the friction with the ground during driving, improve acceleration, and also improve the work efficiency of the car.

If the wheel hub of the car is deformed due to some fault reasons, and the distance from the tire to the central axle is not equal, the car will not be stable during driving.

It is worth mentioning that the center of the circle is called the center of the circle, and the distance from any point on the circle to the center of the circle is equal, when the wheel is in motion, the radius of the wheel is always equal, so the car will run more smoothly, which is why the wheel will be designed to be round.

This is because the distance from the center of the circle to any point on the circumference of the circle is equal, and this equal distance is called the radius. Therefore, people made the wheels round. When the wheels roll on the ground, the distance of the axle from the ground is always equal to the radius of the wheel, so that the ride will be smooth and there will be no bumps.

The reason why tires are round is because only round ones can roll and the force area will be uniform, so the tires should be made round.

Because the tires are balanced and rotate at high speeds, only round ones can realize this ideal desire. So it's round.

Because the circle can be rolled, other shapes can't be scrolled, so they can't be used as moving tools. Therefore, movable objects should be made round.

Because the wheels of the car are round, if the tires of the car are not round, there is no way to install them on the wheels, and the car cannot run quickly.

How do you do a tease roll if it's not round? The answer to this question can be found in physical mechanics, at the same ground level, the rolling friction is less than the sliding friction, the rolling friction is the resistance, and the smaller the resistance cavity force, the greater the power, and the car will run faster.

The tires are round, can roll forward, the most laughing resistance, because the rolling friction is the smallest, convenient and forward, and the rotation process of the circle stares at the rise, the height of the center of gravity will not change, there is no sense of bullying.

This is because the distance from the center of the circle to any point on the circumference of the circle is equal, and this equal distance is called the half-calendar diameter. Therefore, people made the wheels round. When the wheels roll on the ground, the distance of the axle from the ground dust or is always equal to the radius of the wheel, so that the ride will be smooth and will not produce bumps.

Because the round ones can roll more silky.

Round tires are labor-saving, stable and have a high safety factor. The specific reason for the sleepy reed is such as rotten shed:

Round tires are more labor-saving:

The round wheels can reduce the friction with the ground during driving, and the distance between the axle and the ground is equal to the length of the wheel radius, which can improve the acceleration and work efficiency of the car.

Round tires are smoother:

The wheels are rounded, which can reduce frictional resistance during driving, and the axle rolls on the ground through the center of the circle, making the ride smoother. If the wheel hub of the car is deformed due to some fault5 and the distance between the tire and the central axis is not equal, the car will be unstable during driving.

Improved safety factor:

Another function of the round wheel is that when the ground is wet and slippery, its rolling friction is greater than that of the contact surface, and the sliding friction is greater and the resistance is greater. In the event of emergency braking, the safety factor can be greatly improved with the help of anti-lock braking.

Millions of car purchase subsidies.

Tires are an indispensable part of automobiles, automobiles and other means of transportation, and their round design has also been unpublished after long-term practice and research. So, why are tires round? Next, let's take a look at the reasons for the shape of the tire.

Finally, from the perspective of tire safety, round tires also have better stability and safety. Because the center of gravity of the round tire is in the center position, it can maintain a more stable balance during the driving of the vehicle, reducing the probability of safety accidents such as rollover and rollover.

Secondly, from the perspective of tire manufacturing, round tires are also easier to manufacture. Because round tires do not have sharp inspection corners, processes such as molding, rubber injection molding, and molding can be carried out more easily during the manufacturing process, resulting in increased production efficiency and quality consistency.

In short, whether from the point of view of use, manufacturing or safety, the round design of tires is the best solution that has been the result of long-term practice and research. In the future development, with the continuous introduction and application of new materials and new processes, the performance and quality of tires will continue to improve, bringing more convenient, safe and comfortable experience to people's travel.