What s going on with the heat on the top or sides of the refrigerator?

The heating on both sides of the refrigerator is due to the fact that the compressor is running, and the heat generated enters the pipeline, so the phenomenon of hot on both sides of the refrigerator occurs, and frequent opening or deactivating of the refrigerator will increase the workload of the refrigerator, which will lead to the compressor running faster The refrigerator is hot, and too much storage of items inside the refrigerator will also cause the refrigerator to be hot on both sides.

It may be because of the heat emitted by the condenser, the condenser is on the inside of the outer version of the refrigerator, and the outer wall of the refrigerator is the radiator, which causes the refrigerator to heat up.

Heat dissipation condensers are installed on both sides of the refrigerator. For the sake of aesthetic design, the original back-mounted wire coil radiator is placed inside the skin of the refrigerator, so it is normal for both sides to heat up.

The compressor of most refrigerators is generally located on both sides of the fuselage, and when it is working, it generally emits a lot of heat due to condensation. Some users put food that has not been cooled into the refrigerator, causing the refrigerator to cool down quickly, and the sides of the refrigerator will also be hot. There are also users who put the refrigerator in the corner of the wall, so that the air flow around the refrigerator is low, and the heat dissipation is slow, causing the refrigerator to heat up.

When using the refrigerator, users should try not to stop using the refrigerator, so as to avoid the heavy workload of running again, which will eventually cause the sides of the refrigerator to become hot. The refrigerator should be placed in a ventilated and spacious location, and should not be placed in a corner. When taking food from the refrigerator, it is recommended to take it out all at once, and opening and closing the refrigerator frequently will also increase its workload.

Summary. Normal. Because there are heat dissipation pipes on both sides, heat will circulate through these pipes when the compressor is running, so it will heat up. If the device is used for a long time, and in the hot summer, the temperature on both sides will be even higher or even hot.

Normal. Because there are heat dissipation pipes on both sides, the heat will circulate from these pipes when the compressor is running, so it will heat up. If the equipment is used for a long time, and in the hot summer, the temperature on both sides of the Zhichang clan will be even hotter.

The device should be placed in a cool and stuffy place, if the two sides are placed against the wall or if there is something to cover them, there is no way to ventilate, which will cause the temperature on both sides to rise. In addition, it is not possible to open the door frequently, which will also cause the temperature to rise, because if the door is opened repeatedly or if it is kept open for a long time, it will increase the operating burden of the equipment.

It is difficult to reach the temperature of the pre-contained slag set in a short period of time when the equipment is started again after deactivation, especially in summer, when the ambient temperature is high, the operation time will be longer, which will increase the burden of equipment operation, so the temperature of the equipment will continue to increase.

Normal. The side of the refrigerator is particularly hot 70 2, if the side of the refrigerator is particularly hot and has reached 70, it means that the refrigerator has a certain problem of improper use, resulting in the aggravation of the compressor workload and the heat dissipation is not in place. 1. The refrigerator absorbs the heat of foodTo lower the temperature of the food, there must be a source of cryogenic temperature that is lower than the temperature of the food.

With this low temperature source, the heat of the food will automatically be transferred to the low temperature source, reducing its own temperature. The refrigerator has a cold compartment and a freezer chamber, and the evaporator coil for making the cryogenic source is buried in the back plate of the refrigerator room, and the refrigerant flows in the coil. The refrigerant flows through the evaporator coil and evaporates, absorbing a large amount of heat, reducing the temperature of the inner wall of the refrigerator in contact with the evaporator coil, and the corresponding inner wall of the refrigerator will absorb heat.

food and lower the temperature. 2. Transfer of absorbed heatThe refrigerant that has been vaporized through the evaporator coil carries the heat absorbed from the food, and only by transferring the heat to the outside of the refrigerator can it be refrigerated and refrigerated, and the refrigerator uses copper pipes to transfer these gasified refrigerants to the outside of the freezer insulation layer, and then compressed by the compressor and transferred to the condenser on the outer wall of the refrigerator to complete the heat transfer. 3. The release of heatThe heat transferred by the compressor is collected in the refrigerant in the condenser.

The evaporated refrigerant is compressed, the pressure rises, and the temperature rises, making the temperature of the heat transfer condenser higher than the ambient temperature. The condenser releases heat into the air and the refrigerant is liquefied**. The heat emitted by the condenser is absorbed from the food.

Some condensers are installed on the outer panel of the refrigerator, and the outer wall of the refrigerator is the radiator. The interior space of the refrigerator is a cooling zone that absorbs heat. Outside is the condensation zone, which allows the heat to be released.

The refrigerator releases heat through the outer surface, which produces heat. Resolution1. Because the two sides of the refrigerator are heated, the refrigerator can not be placed close to the wall, nor can it cover things on both sides of the refrigerator, which will hinder the heat dissipation on both sides of the refrigerator and increase the temperature, so the two sides of the refrigerator should be kept with enough space for heat dissipation. 2. Don't open the refrigerator too frequently when using it, frequent opening will increase the temperature in the refrigerator and increase the workload of the refrigerator, and the refrigerator will make the temperature on both sides higher if it is in operation for a long time.

3. Once the refrigerator is used well, do not stop it, because once it is deactivated, especially in summer, when the temperature is very high, it will take a long time for the refrigerator to reach the set refrigeration temperature, and the temperature on both sides will increase after a long time of operation. 4. The items stored in the refrigerator should be kept in a certain number, not too little, because the temperature of the items stored in the refrigerator will be very low, and the temperature will not rise rapidly even in the state of short-term power failure, so that the refrigerator will quickly reach the set temperature in a short time after power-on, so as to avoid the temperature on both sides of the long-term operation.

Dear, according to the data query, it is normal for the outside of the refrigerator to heat up, this is because the refrigerator needs to dissipate heat when it is working. The inside of the refrigerator is refrigerated by compressing the refrigerant, and this heat is transferred through the radiator to the metal casing on the outside of the refrigerator, and then the tongsong cover is absorbed through the casing and dissipated. Therefore, it is normal for the outside of the refrigerator to feel a certain amount of heat.

At the same time, the radiator and compressor of the refrigerator will also make some noise, which is also a common phenomenon. If you notice that the temperature on the outside of the refrigerator is unusually high or too noisy, you can consider cleaning the radiator or adjusting the position of the refrigerator.

Summary. Refrigerators are mostly equipped with built-in condensers, and their heat dissipation components are mostly located on both sides. Therefore, when the refrigerator is running, the high-temperature refrigerant gas discharged by the compressor is dissipated through the condensers on the side panels on both sides of the box.

Therefore, it will cause the side panels to be a little hot and hot. And if the outside environment is hotter, the refrigerator will be hotter. Therefore, when placing the refrigerator, it is necessary to reserve at least 10cm of heat dissipation space for the refrigerator, so that there is a space for the refrigerator to dissipate heat.

Refrigerators are mostly equipped with built-in condensers, and their heat dissipation components are mostly located on both sides. Therefore, when the refrigerator is running, the high-temperature refrigerant gas discharged by the compressor is dissipated through the condensers on the side panels on both sides of the box. Therefore, it will cause the side hunger Jane plate to be a little hot and hot.

And if the outside environment temperature is higher, then the ice teaser box will be hotter. Therefore, when placing the refrigerator, it is necessary to reserve at least 10cm of heat dissipation space for the refrigerator, so that there is a space for the refrigerator to build on the hill to dissipate heat.

Hello dear! Slight heat generation on both sides of the outside of the refrigerator is normal because the inside of the refrigeration system is pressure-regulated and circulated through the refrigerant, which absorbs heat from the condenser and then releases the heat to the outside environment through the evaporator. As a result, the exterior sides of the enclosure that let the lead feel a little hot during the cooling process.

However, if it feels very hot or smelly, you need to check whether the refrigerator's early cooling system is working properly, and it is recommended to ask a professional to check and repair it

The cooling part of the refrigerator is on both sides or behind the refrigerator.

Therefore, as long as it is refrigerated, this is normal.

However, be careful to leave at least 15 cm of space around the refrigerator to facilitate heat dissipation.

Different brands of refrigerators have different heat dissipation positions, and early models generally have an exposed condenser at the rear, which is generally a black coil, which is the heat dissipation part. In order to achieve the aesthetic effect, the condenser of the refrigerator is generally hidden, there are in the side panel, there are also in the rear panel, but they are all outside the insulation layer, and the compressor generally participates in heat dissipation, in order to prevent the condensate from flowing out, the condensate in the refrigerator is generally led to the water tray in the upper part of the compressor, and the heat of the compressor is used to evaporate it into the air.