Urgently, V880 flashing machine has become bricked, what should I do?

Brick machine is some electronic products brush unsuccessfully burned the motherboard BIOS machine, the general intelligent electronic products have the function of upgrading the system, and the abbreviation of the upgrade system is the flash, every time the machine is flashed to the BIOS of the machine has serious wear and tear, because the new system data is re-burned into the memory. If it is not necessary, it is recommended not to flash the BIOS or machine firmware easily. Generally, the failure of the burning is due to the power failure on the way, or the congenital instability of the BIOS chip and other control cores (such as the power control chip), which will lead to the failure of the refresh.

If it fails, it is recommended that you send it to an after-sales service or a large repair shop for repair. If you can find a suitable BIOS chip, it can still be recovered, and if you can't find it, you have to send it back to the manufacturer. If the manufacturer does not have excess chips, it has no value, so it is called a brick.

Hope it helps, I wish you a happy time!

Look at your appearance has not completely become bricked, you can force the flash, specifically the **good firmware (ROM) is unzipped to the root directory of the SD card, and the firmware folder name should be image, which includes the main firmware program. Remember to put the image folder directly into the root directory of the SD card. You can use a card reader to connect to your computer to complete the above steps to copy the files.

Connect to the charger when the phone is turned off, and now start the flashing steps: press the sub-button + volume up button + power button at the same time, let go of the flashing progress and wait for the progress bar to finish. The phone will restart after swiping.

Create a file image in the memory card, copy the recovery package there, install the memory card to the phone, install the battery, press menu, volume +, power button in turn, wait for the progress bar to appear on the screen, finish, wait for a while, thank you!!

The recovery package has been sent to your mailbox.

Generally, when you press the power on, it should be that the phone is out of power, so let's see if it's out of power!

If you can enter the flashing mode, you can try the following methods: card swiping: use a memory card (sd, tf, etc.) to flash the machine, card swiping process:

3. Shut down, remove the SIM card, install the memory card, and it is recommended that the important things in the memory card should be backed up.

4. When shutting down, press the power button and the volume plus button at the same time, about ten seconds, and then let go.

5. Enter the recovery mode, i.e. REC mode.

6. Select Wipe Cache Partition to clear the cache.

7. After cleaning the cache, select Wipe Data Factory and restore the factory settings.

8. Select "Install Zip from SDCARD", the power button is OK, then select Apply SDCARD:update, and the power button is OK, that is, select the flash package from the memory card to flash the machine, and wait patiently for it to be completed.

Now on the official website of your mobile phone**A brush package,Tell me to find a way to put it in the memory card of your mobile phone,Remember that after the installation package is unzipped, it will go to an installation shot rough instructions and a decompression package,This decompression package should not be unzipped,Put it directly into your memory card,Okay,Press the boot button and volume button when you turn it on,To press it together,This is a screen that will appear on the phone,There are 3 options on it,The volume button Zhaohe Chun up and down to adjust the options,Select the first one to flash the machine。

Just re-brush a good one, and I used to do the same.

First, you can use the software to flash the machine, the operation is simple, (take the bell pepper brush machine as an example) method steps:

3.Click "Start flashing" and wait for it to finish, the phone will automatically restart, and it will take a long time to turn on for the first time.

3.Click "Start Flashing", when it is done, the phone will automatically restart, and it will take a long time to boot it for the first time.

Yes, the official T card upgrade package can be recovered, put the upgrade file into the image file in the root directory of the mobile phone SD card and add it (use a card reader, you can build your own file without file addition).

Press and hold the menu on power.

It's automatically restored, and when the progress bar is full, it's OK, and you can wait patiently.