Joyoung soymilk machine 610 and 510

The comparison between 510W and 610 is as follows:

Function: 510 Grain Soy Milk, Dry Beans Wet Beans, Mung Bean Soy Milk, Rice Cereal, Fruit and Vegetable Cold Drink610 Grain Soy Milk, Dry Beans and Wet Beans, Fruit and Vegetable Cold Drink.

Netless 510: Easy to clean, but not as delicate as 610.

Youwang 610: Contrary to 510, soy milk is more delicate, but it is a little more troublesome to clean.

510w five-grain soy milk, dried beans wet beans, mung bean soy milk, rice cereal, fruits and vegetables cold drink No net Bottom heating.

610 Grain soy milk, dried beans, wet beans, fruits and vegetables, cold drinks, nets.

610 is better without a net is not delicate.

510 is netless, the degree of fine grinding is not as good as 610, 610 is netted, and the degree of crushing is higher. Welcome friends to my house to buy, use this question as a voucher, to give you a cheap ah, hehe.

I don't know which two models you are talking about, 610 and 510?

If it is JYD-C13S610 and JYD-510W, of course, the former is better, because JYD-C13S610 has a grain grinder, and 510W does not, so in terms of the quality of the soybean milk, it must be JYD-C13S610 is a little better.

But in terms of function, 510W has more rice cereal and mung bean functions than C13S610.

So choose according to your own actual needs and preferences!

Joyoung Fengfan soybean milk machine alarm**E10, which means that the machine is faulty or due to improper human operation causes problems in Joyoung soymilk machine。The possible causes and solutions are as follows:

It may be due to the person accidentally selecting the wrong function key, resulting in the Joyoung soymilk machine can not operate normally, so that the soymilk machine error stop working.

2. Check if you forgot to add water to Joyoung soymilk machine, Joyoung soymilk machine can not be carried out normally.

3. Maybe it's because of Joyoung soymilk machineThere are too many ingredients, and most of the ingredients are thick。As a result, the bottom of Joyoung soymilk machine sticks, and it cannot work normally, resulting in the E10 error of Joyoung soymilk machine and stops working.

The correct way to use the soymilk machine:

With just a few beans, you can grind a large pot full of soy milk and add ingredients as you like.

1. Advance the willWash the soybeans and soak them in a mercury balanceIf you want to add mung beans, black beans and other beans that are not easy to soak soft, it is best to soak them half a day in advance.

Pour the soaked beans into the soymilk makerIn general, the water used to soak the beans is poured into it at home.

Add the right amount of water according to the amount of beans, but it is recommended to add a little more, if there is too much bean dregs, the soy milk is basically not very much. Note that it cannot be less than the lowest water level and cannot exceed the highest water level, otherwise the machine is prone to failure.

Cover the head of the soymilk machine in the correct position and make sure it is placed in place.

After plugging in the power supply and the indicator light is on, select the button according to the functions provided by the soymilk maker itself and the type of ingredients addedFor example, if you add black rice and peanuts, you can press five-grain soy milk.

The soymilk maker will start working. Wait until the machine sounds an alarm, which means that the soy milk is ready.

The appearance of E10 in the machine is related to the addition of more food, the food pulping is too viscous, and the temperature detection is abnormal caused by the sticky bottom of the food.

Already smashed:You can use the combination and match Huihe valve opening button on the machine to open the valve and discharge the slurry;

NopeCrush:If the ingredients are not crushed, the valve cannot be opened directly, which will lead to blockage, and you can choose the juice on the machine The milkshake does not enter the water function to crush the pulp again and then discharge;

The functions of these two soymilk machines are basically the same, it is recommended that you choose D561, and it is also recommended to choose your favorite style or suitable function better. Let's take a look at the relevant knowledge of soymilk machine.

How to use the soymilk machine for coarse grinding:

1. Measure the ingredients.

Before using the soybean milk stool to make soy milk, we need to soak soybeans or other beans sufficiently, so that it is easier to make soy milk. Use a soymilk machine with a dry bean measuring cup to fill the dried beans according to the 2 3 scale line, wash them and soak them in water, and the soaking time is 8-16 hours in spring and autumn, 6-10 hours in summer, and 10-16 hours in winter. If you want to speed up the soaking time, you can choose warm water soaking appropriately, which can be shortened to 2 to 3 hours.

2. Add the ingredients.

Add beans and rice to the cup, pour it into the bean measuring cup, measure the rice according to the 2 3 scale, wash it with the soaked beans, and put it directly into the cup.

3. Add water.

After putting in the ingredients, you can put in the water, and there will be a water level in the cup. Add water between the upper and lower waterlines.

4. Install the grain grinding machine.

Take the grain grinder and install it in the direction of the installation instructions, the mouth of the grain grinder and the lower cover should be tight and seamless, after the installation is completed, pull it down by hand, and the grain grinder does not move, indicating that it is installed in place.

5. Make soy milk.

Put the machine head into the cup according to the correct position, plug in the power cord, the power indicator light is on, press the soybean milk jian, the corresponding indicator light is on, and start the full nutrition soybean milk program. When the soy milk is beaten, there will be a prompt light or prompt sound, and the soy milk is ready. After the machine beats and boils fully according to the set program, the electric heater and motor will stop working, and the machine will send out an audible and visual alarm to indicate that the soybean milk has been prepared.

At this time, unplug the power plug and you are ready to drink.

Joyoung's soybean milk machine is very good. There shouldn't be much difference between the two. After all, Joyoung is a big brand. The quality is all good.

Joyoung soymilk machine these two models are similar, I personally think that it is more convenient to choose one with low noise, and it can be timed.

This soymilk machine is very easy to use, and it is a problem of the method to put too many beans and not be able to produce soymilk, so when making soymilk with a stall, the ratio of beans and water is a certain statement. It is not good to put too many beans, it is easy to lead to a lot of bean dregs, and it is not delicious to put too little.

A dish of soy milk preparation.

Soybean milk method.

Ingredients: Soybeans, rice.

Practice steps: 1. Select the soybean grains that are full and non-bad, soak them in hail water overnight, and then gently scrub them with your hands to clean up the soaked and swollen skin as much as possible. The next morning, we can put the soaked soybeans and rice together in the soymilk machine.

2. Add enough water, the ratio of water and soybeans is controlled at about 10:1, add a little less water if you want to be thicker, put rock sugar into it, and then press the switch to beat the soybeans into raw soybean milk for later use. Turn on the soy milk button function, and the soybeans and rice will be beaten into a pulp at the same time.

3. The soybean milk beaten out in this way increases the flavor of the rice fragrant and glutinous, smooth, coupled with the sweetness of rock sugar, the sweet, rich, delicious and nutritious soy milk is ready!

Tips: If you want to make soy milk drink more fragrant, in addition to adding an appropriate amount of sugar to it, you only need to add some rice, so that the soy milk tastes sweet and rich, with the fragrance of rice, the soy milk tastes thick and more nutritious! The ratio of soy milk to rice is 3:

1. Of course, the more rice you add, the thicker the taste will be, and you can measure it with the cup that comes with the soymilk machine!

Nutritional value of soybeans:

1.Soybeans contain about 40% protein, which can be compared with animal protein in terms of quantity and quality, and the protein content of 500 grams of soybeans is equivalent to 1500 grams of eggs, or 6000 grams of milk, or 1000 grams of lean pork.

2.Soybean protein contains more essential amino acids, especially rich in lysine, which just makes up for the deficiency of cereal lysine, and the lack of methionine in soybeans can be supplemented by cereals.

3.The fat content of soybeans is 18-20%, which occupies the first place in beans, and the oil yield is 20. In addition, it has the advantage of less cholesterol than animal fat, and is rich in linolenic acid and linolenic acid, which make soybeans have the effect of lowering cholesterol; There is also more lecithin, which is important for the development of the nervous system.

The appearance of E10 in Joyoung soymilk machine means that the water level exceeds the normal value, and it is recommended to reduce the material and add water appropriately.

The reasons for Joyoung soymilk machine E10 are:

1. Most of them are caused by the viscous or sticky bottom of the material, so you should first pour out the material in the machine, clean it thoroughly, especially the bottom of the cup, and then only add water to try it to confirm whether the fault is eliminated.

2. Whether to reheat the ingredients: The machine does not support secondary heating, if the crushed ingredients are used, it is easy to sink to the bottom, causing the E10 prompt. There is no need to waste the previous ingredients, you can use the function of the machine to crush them without heating, pour out the steam and cook them in other pots for drinking.

Joyoung soybean milk machine E10 processing method?

1. The material is viscous or sticky to the pan.

When the material added to the Joyoung soymilk machine is viscous or sticky to the pot, the source of the mu potato will fail**e10.

Vertical method: pour out all the materials in the wall breaker, and then thoroughly clean the fuselage, pay special attention to clean the bottom of the cup, and then pour some water, restart the machine, and see if the fault is eliminated.

2. Reheat the ingredients again to appear E10

The wall breaker of Joyoung soybean milk machine does not support secondary heating of ingredients, and the use of crushed ingredients will sink to the bottom, and there will be an E10 fault prompt.

Don't waste the cleaned ingredients, there is a heating function on the wall breaker, you can pour out the food in the wall breaker, and then put it in the rice cooker to heat and cook.

3. I pressed the wrong function key.

If the Joyoung soybean milk machine has an E10 fault code, the hailizer may have selected the wrong function key, such as selecting the function button of soybean milk or cooking porridge when grinding chili powder, the machine will report an error E10 and stop working.