How to type characters and characters in Auto CAD

This depends on what font the landlord chooses, if you use a large font, there are few fonts with this character.

The landlord can replace it with two characters, and it will not be visible when printing.

That is, regardless of single-line multi-line text input: %

The effect is that ° and a c make up °c

If you have this character in large font, you can copy it directly.

The above is just the landlord in the use of large fonts and did not install other shx fonts) As for the landlord said "*" is usually the keyboard press shift 8 can be played, if you want to play the multiplication number, what big font is used, some fonts directly hit * is, like some third-party fonts such as fsdb is.

It is recommended that the landlord next SHX viewer software,It's okay to flip through the fonts under the ACAD installation directory.,If you want to draw well, you have to continue to learn.。

Windows soft keyboard has ah, it is best not to use % input, because the characters at this time are Western characters may appear incompatible with Chinese characters, and with the soft keyboard input, it is the symbol in the Chinese font library, there will be no incompatibility!

When you type multiple lines of text using the 't' shortcut, the 'Text formatting' toolbox will pop up, click the '@' logo, and there will be more in the 'Other' section below. Let's see if it's okay.

You can use the Sogou input method to type.

Steps: Enter the space to talk out a dialog box (enter the word you want to enter) OK.

If you want to size it, you can scale it after writing, or you can double-click to adjust the font size!

When entering text, it is recommended to use a single line of text if it is not a large paragraph of text. Command: dtext, alias: dt, menu: drawing - text - single line of text.

For large paragraphs of text, such as descriptions, etc., it is more appropriate to use multiple lines of text in order to unify the formatting and. Command: mtext, alias: t or mt, menu: draw - text - multi-line text.

Type T Enter in the command bar, and then enter the text as prompted!

Open the CAD menu to give the picture, open the drop-down menu, there is text in it, and then select a single line of text, you can enter the text.

The shortcut key is mtext, and if you want to change the size, you can go to the a in the toolbar to change it.

Drawing (D) in the toolbar - Text - Single-line text (multi-line text).

There is a common tool in the tool, the "a" glyph, which is the Add Text command.

CAD makes us commonly used drawing software, such as interior design, landscape design, tooling design and even a furniture design, these are all required CAD software to draw drawings. Of course, in the process of drawing drawings, we will make some annotations to the drawings, such as dimensioning, text annotation, etc. So how do we enter text into CAD drawings?

1. There are several ways to input the text of CAD

1. Shortcut:"att"Attribute text style. This is mainly for the text without fonts, effects and other special requirements, this is more convenient and faster to use.

2. Shortcut key: "MT.""This text can be set by font, height, bold, skewed and other style settings. More commonly used.

3. Shortcut keys:"dt"This is mainly for special requirements, such as I want to tilt the typed text 10 degrees, and I can also set the height, which is less used.

4. Shortcuts:"st "It is mainly used to set the text style, including the text height, font, effect and other settings.

2. Shortcuts:"att"Attribute text style.

First, we open a blank CAD file. Enter the shortcut key "att", and a window will pop up on which you can enter text, prompts. as well as text style settings, height settings. (pictured).

When the text is entered, we need to change it, just double-click, and a pop-up window will pop up, just modify its content, but note that it can't change the text height.

At shortcut key t, after the text is entered, it is combined with the text into blocks. It can still be clicked to make text changes.

3. Shortcut key: "MT.""

Fourth, shortcut keys:"dt

Enter the shortcut key "dt" directly"Click on a dot and enter the text size, such as 500mm, and enter the tilt angle, such as 20 degrees, and you will get the content as shown in the picture.

5. Shortcut keys:"st"Set the font congratulatory style.

Once we've styled the text, you're typing "att.""or "dt.""The font that comes out is the font we set.

A1Use the computer's built-in input method to right-click to find it,For example, Sogou,Right click to pop up in the customization of the input method - emoji - select it inside to see if there is。

Today, I will give you a brief introduction to the function of how to input text in Haochen CAD Picture King PC version?

1. Open the drawing and switch to the mode work interface;

2. Find the Create Text command and click it.

3. Follow the prompts to create a position for the placement of multiple lines of text in the drawing;

4. Enter the required text content into the text box and set the text size and other attributes;

5. Click the [OK] button on the right side of the text format or click on the blank space to return to the drawing interface, and the multi-line text is successfully created.