HOW CAN I TYPE A 0 WITH A SLASH IN EXCEL?

Here's how to do it:

1. Enter the number 0 in an empty cell, right-click "Font" on the toolbar, paste terminal into it, and press Enter.

2. Enter uppercase m and v in two adjacent empty cells, select these two cells, right-click "Font" on the toolbar, paste gulim into it, and press enter.

Note: gulim, gulimche, dotum, dotumche, arial, kartika, modern, all of the above fonts can achieve the MV effect you want.

3. In the future, that cell needs these contents. Just copy the past ...

Addendum: I've tested it all and I'll be able to do it here!

I use XPSP2 enterprise installation version (non-ghost integration installation version), lite office2003 7th version.

It's not clear what you're talking about, though"Not really"Referring to what, but I think your font library is missing a lot of font files!

Therefore, it can be basically concluded that you are using the ghost integration version that has been **, or your system has been**!

How to do it: You just need to copy it from another computer that contains both terminal and gulim fonts to your own computer.

Specifically, the general font file is in"c:\windows\fonts"directory, open this folder, and then find it"gulim & gulimche & omitted).", and then tap""menu"Copy", insert the USB flash drive and turn it on, point""menu"Paste"Command.

Then copy the terminal to the USB flash drive according to the above method.

Copy the two font files on the USB flash drive to your computer"c:\windows\fonts"directory

This one is as simple as holding down the alt key on your keyboard, then typing 216 on the numeric keypad, and finally lifting the alt key.

This is the case for both fixedsys and terminal class fonts.

The class is like this used to print more tickets.

It seems that only word can display it like this.

You can add a slash to the border of the excel unit, and then perform operations such as text, line break, etc., to complete it.

The specific steps are as follows:

1. Create a new blank excel and create a new sheet;

<>3. In cell E4, right-click to format the cell.

4. Check the 'Border' tab and select the line style.

5. The border class is missing the staring type, select the slash.

6. A slash line appears in the cell.

7. In the cell, after 'Name', press and hold Alt+Enter to complete the line break.

8. In front of 'name', press and hold the space to beautify the text layout.

PrecautionsThe text content cannot hold down the oblique line of the cell, because after pressing, it will cause the interruption of the oblique line and affect the aesthetics of the cell.

1. First of all, open an excel **, and then select a cell to make it bigger appropriately.

2. Then right-click on the block cell, and in the pop-up options, choose to format the cell.

3. Enter the cell format and select the border, and select the style of the slash in the border.

4. In this way, you can set a slash in the cell.

5. If you want to enter text in a cell, enter the required text directly.

6. Then press and hold the "alt+enter" button on the keyboard in the middle of the text, so that the two words will be wrapped. Pressing the space bar again will make the font move back. You get the effect of text on both sides of the slash.

The steps to type a slash in excel and type in it are as follows:

First, enter the required text in the cell to be slashed, and use the alt+enter key in the middle to force a line break, such as date and course;

2. Select this cell, right-click the drop-down list and select Format Cell;

3. Select the fourth border option in the toolbar in the pop-up window;

5. Go back to the cell, see that the slash has been set, use the space bar to make the date to the right, and you're done!

1.The first step is to enter the words "Name" in cell A1, then press Alt+Enter to wrap the line, enter the words "Class", and select the cell content [Align Left].

2.Select the A1 cell, right-click - [Format Cell] - [Border] - Click the [Slash] button in the lower right corner to add a slash from the upper left corner to the lower right corner of the cell, and confirm it when it is finished, the effect is as shown below.

3.Place the cursor in front of "Name" and add an appropriate amount of space to achieve the following effect.

4.You can also directly use line breaks and spaces to achieve the following effect first:

5.Then [Insert]-[Shape], select [Line], and draw a straight line with the mouse starting from the upper left corner of the cell, which can also achieve the effect of two columns of oblique table headers.

If you want to draw only one slash, format the cells by placing the slash buttons in the lower row of the border bar.

Enter the text in the cell, use alt+enter to wrap the line, align it to the left, insert a space before the upper text to adjust the text position.

If you want to draw more than one diagonal line, you must use the Line tool on the drawing toolbar to draw it, and the text is best to use the text box, set the text box to borderless, and adjust the position.

Format cells --- borders --- have slashes inside.

Then enter the text, some use superscript, part use subscript (note that you also right-click to format the cell after selecting Chinese characters, do not select the whole cell and then format).

Definitely the effect you want.

It's very simple, use the straight line in the drawing, just pull a line, the words inside, the top is on the right, and the bottom is on the left.

1. You can use the border tool to select the diagonal of the border to make a slash. 2. You can draw with a drawing tool.

1. First of all, you must open excel2003, and then add the diagonal cell to increase it.

2. After the cell is enlarged, click the view on the toolbar above, and then click the toolbar on the view drop-down menu.

3. Click on the toolbar, and then click on the toolbar drop-down menu.

4. Click on the drawing toolbar after clicking, and click the line on the toolbar.

5. Click on the upper left corner of the cell after clicking on the straight line, and then hold down the left mouse button to pull diagonally to the lower right corner, so that the diagonal line is drawn.

6. If you add text, click on the view of the toolbar, then click on the toolbar, and then click on the form.

7. After clicking on the form, the form tool window appears, and click the label on the top of the window.

8. Click on the label and click on both sides of the slash to add the label, and then change the name of the label to the name you want to enter.

In"Cell formatting"on your Mac, select"Other frames", and then click on the left and right diagonal lines you need.

Select the cell - right click - format the cell - border - slash - OK.

You can also draw a diagonal line. Click the menu "View" "Toolbar" "Drawing", and click "Line" in the "Drawing" toolbar to draw a line where you need.

You can type multiple rows of items in the same cell, for example, type "Name" and then hold down the Alt key and press Enter, and then type "Date", and the position of the item can be adjusted with a space.

Click the "Draw" button, select "Line", and the mouse will change to a cross Move it to the starting position where you want to add a slash, hold down the left mouse button and drag to the end position, release the mouse, and the slash will be drawn. In addition, you can use the "Text box" button to easily add text above and below the slash, but there is a border around the text, if you want to cancel it, you can select the Chinese word box, bring up the quick display menu, select "Object Format" "Pattern", and select the "No Border" item.

Right-click on the cell - Format the cell - Border - the one in the bottom left corner.

Check the number 2 - format the cells and tick the superscript.

Select the cell - right-click - set the cell format - border - click the position of the slash - OK.

ctrl + 1

Select the border. Then to the right of the border, there are slashes.

How to type a slash in excel.

1. First of all, open the computer of our shirt or chong, create a new excel** on our computer desktop, and click on it to <>

<>5. After entering and relieving the slow entry, we can draw the diagonal line we want to complete the rendering.

1. First of all, open Excel**, you need to insert a slash in the A1 cell and enter the text content.

2. Click the "Insert" option in the toolbar, and click the "Line" style in the "Shape".

3. Drag the mouse to draw a positive diagonal line in the cell according to the style shown in the figure below.

4. Then enter two lines of text in the cell, and you can use the "alt+enter" key for line wrapping in the cell.

5. Then click the cursor in front of the second line of text, click the Enter key to move it to the bottom of the cell, and move the first line of text to the upper corner of the right corner of the cell.