Consult how to move the refrigerator when moving, and how to move the refrigerator when moving

The refrigerator is recommended to be transported vertically while standing

Of course, if it is placed horizontally during transportation, it does not mean that the refrigerator is broken. If the refrigerator is laid flat, liquid refrigerant and lubricating oil may flow into the pipeline, which will result in a failure or other unpredictable consequences due to unbalanced high and low pressure in the boot line. If the refrigerator is put down and transported, some remedial measures can be taken, the refrigerator can be placed upright for more than 4 hours, so that the lubricating oil can fully fall back into the body, and then power on and run.

1.Unplug the main, cut off the power, remove all the food in the refrigerator, use tape to secure the refrigerator shelves, humidor and freezer drawers and other moving parts, close the refrigerator door tightly, and secure it with tape to prevent it from being opened when moving.

2.When handling the refrigerator, it should be noted that the tilt of the fuselage should not exceed 45 degrees, and the vertical state of the box should be maintained, and it should not be upside down and horizontally, nor should it be grabbed by the doorknob or dragged the condenser to avoid damage. Because the inclination angle of the refrigerator using the reciprocating compressor is not too large in the handling, if it is greater than 45 degrees, the spring in the compressor will be deformed due to uneven force, and even cause decoupling, and the compressor will lose its original balance and produce abnormal noise and damage to the compressor, so you must be careful when transporting or moving the refrigerator.

3.After transportation: It needs to be corrected for at least 2-3 hours before it can be energized to protect the life of the compressor, because the compressor is moved due to the shaking of the refrigerant in the cooling pipe, it must wait for the impurities in the refrigerant to precipitate before it can operate, otherwise when the compressor sends out the refrigerant, it will block the high and low pressure valves, resulting in a decrease in the refrigeration effect.

The refrigerator with a rotary compressor will not have the above phenomenon, and can be carried upstairs in a lying position and tilted upstairs.

In the process of handling the refrigerator, the inclination of the body can not exceed 45 degrees, and the vertical state of the box should be maintained as much as possible, especially the refrigerator can not be turned upside down and horizontally, the reason is that when the inclination angle of the refrigerator is too large, it will cause the internal compressor to fall off from the spring and tilt in the shell, and when the power is on, the compressor vibration will directly collide with the shell, resulting in a serious mechanical impact sound, and the resulting failure can only cut the compressor, re-weld after maintenance, evacuate, and charge the refrigerant. You can't just put it sideways!

When moving, it is the people from the moving company who tie up the refrigerator and carry it on their backs.

If you want to move the refrigerator, there is no way for a person to move the refrigerator, the refrigerator is very large in size and very heavy, even if you move it alone, the center of gravity is slightly unstable, and it is still very dangerous to fall. And the refrigerator must be carried upright, and the inclination of the refrigerator cannot be greater than 45 degrees. So it's impossible to move alone!

Here's how to handle the refrigerator:

1. Two people carry, one person lifts the front door foot, and one person lifts the top after lifting, which is labor-saving and safe;

2. If it is a very old refrigerator, the back side should be sided, and the old refrigerator should not let the refrigerator tilt angle more than 45°;

3. If it is a refrigerator purchased in the last 6 years, a person has to carry it backwards and lie down, but the refrigerator must be upright and static for 3 to 8 hours before use.

The above answer applies to various brands of refrigerators.

1.Empty the fridge: Before moving, remove all food and drinks from the fridge and empty everything inside the fridge and on the fridge door.

2.Turn off the refrigerator: Before moving, unplug the power cord of the refrigerator and close the refrigerator door to allow the temperature inside the refrigerator to gradually rise.

3.Move the refrigerator: When moving, you need to tilt the refrigerator to one side, then loosen the screws on the refrigerator wheels, remove the wheels, and put the refrigerator back in a stable position.

4.Wrap the refrigerator: When moving, the refrigerator needs to be wrapped in a soft material such as styrofoam or blankets to prevent the refrigerator from being bumped and damaged during transportation.

5.Transporting the refrigerator: When moving, you need to put the refrigerator on a special moving vehicle, and pay attention to the position and fixing method of the refrigerator to ensure that the refrigerator will not shake or tilt high during transportation.

6.Installing the refrigerator: After moving, you will need to reinstall the refrigerator in a new room, reinstall the wheels, plug the refrigerator into the power cord, and wait for a period of time before putting food and drinks inside the refrigerator.

There are a few things you need to pay attention to when moving a refrigerator:

1.Remove food and beverages from the refrigerator in advance, wash them and dry them thoroughly.

2.Turn off the power to the refrigerator and unplug it.

3.Remove all drawers, shelves, or old partitions from the refrigerator to avoid damage during transportation.

4.Use a professional moving tool, such as a trolley or moving vehicle, to move the refrigerator away from its original location.

5.During handling, pay attention to the stability of the refrigerator and avoid tilting or shaking the refrigerator.

6.After placing the refrigerator in a new location, wait at least 2 hours before plugging the plug into an electrical outlet to avoid damaging the refrigerator compressor.

7.Wait for the inside of the refrigerator to drop to a temperature suitable for collapse before refilling food and beverages.

1. Before handling: unplug the power plug, cut off the power supply, take out all the food in the refrigerator, fix the moving parts of the refrigerator shelf, humidor and freezer drawer with tape, close the refrigerator door tightly, and fix it with tape to avoid being opened when moving. The fuselage should not be tilted more than 45 degrees.

2. During the handling process: when handling the refrigerator, it should be noted that the tilt of the fuselage should not exceed 45 degrees, and the vertical state of the box should be maintained. During transportation, it is protected from bumps and violent vibrations.

3. It needs to be corrected for at least 2-4 hours before it can be energized to protect the life of the compressor, because the compressor is moved due to the shaking of the refrigerant in the cooling pipe, it must wait for the impurities in the refrigerant to precipitate before it can operate, otherwise when the compressor sends out the refrigerant, it will block the high and low pressure valves, resulting in a decrease in the refrigeration effect. Put something in the refrigerator after half an hour of power-on, which is conducive to maintenance!

4. Place it away from heat sources and places with low humidity.