Roger Dubuis watches designated after sales service center

Reasons and solutions for inaccurate watch time:

1. Insufficient power reserve. You need to check whether the power is sufficient, if the amount of movement of the self-winding mechanical watch is very small, it may also cause insufficient power reserve, you can supplement the power by manual winding, and then observe whether there is a phenomenon of speed and slowness, if it is still recommended to go to the special repair shop for testing.

2. The power is insufficient. If the quartz watch suddenly finds that it is slowing, it is likely to be caused by insufficient battery energy, and send the watch to a special maintenance point to check the power or replace the battery.

3. Having been beaten or impacted. The watch is very tight, if it is hit or hit, it may cause loose damage to the internal parts, and it may also cause time problems, so it is recommended to go to a special repair shop for testing.

4. Maintenance is required. Lack of oil or wear and tear of internal parts of the movement may cause time problems, which need to be serviced and sent to a designated repair point for maintenance services.

5. Under the influence of ambient temperature, the watch is magnetized: if the hairspring of the watch is magnetized, the watch will not be accurate. The influence of the wearer's usage habits may cause an increase in the time error.

Sending the watch to a designated repair point for professional inspection and adjustment can restore the watch to the normal error range.

Five common reasons for watch time error and watch time inaccuracy:

1) Insufficient power reserve: You need to check whether the power is sufficient, if the amount of movement of the self-winding mechanical watch is very small, it may also cause insufficient power reserve, you can replenish the power by manual winding, and then observe whether it continues to have the phenomenon of fast and slow.

2) Insufficient power: If the quartz watch suddenly finds that it is slow, it is likely to be caused by insufficient battery energy, and you can send the watch to a special maintenance point to check the power.

3) Hit or hit: The watch is very tight, if it is hit or hit, it may cause loose damage to the internal parts, and it may also cause the problem of running time. This is to be dealt with in a timely manner.

4) Need to maintain: The lack of oil in the movement or the wear and aging of internal parts may cause time problems, which need to be maintained, and need to be sent to the designated maintenance point for maintenance services. You can go to [8th Floor, Block E1, Oriental Plaza Office Building, No. 1 East Chang'an Street, Dongcheng District, Beijing].

5) In addition to the above common situations, the watch is affected by some ambient temperatures: if the hairspring of the watch is magnetized, the watch will not be accurate.

There are two situations in which the watch is not allowed.

If it's just a little fast, for example, it's only more than ten or twenty seconds a day, then the gossamer circle is a little shorter, and this situation is okay.

If you know a little bit about the watch, you can adjust it yourself, if you don't understand, you have to find a watch repairer.

How to deal with water ingress into the watch:

If you accidentally get water inside your case, you can use a granular substance called silicone to put it in a meter-closed container with the watch that has accumulated water, and after a few hours, you can remove your watch and the water will disappear. This method is simple, convenient and economical, and does not compromise the accuracy or longevity of the watch. In addition, the silica gel that has absorbed water many times can be dried at 120 degrees for several hours, and the water absorption capacity is renewable, and it can be used again and again.

Method 2: If the mechanical watch is soaked in water, you can use several layers of toilet paper or flannel cloth that is easy to absorb moisture to wrap the watch tightly, put it at about 15 cm near the 40-watt light bulb, and bake for about 30 minutes, and the water vapor in the watch can be eliminated. Do not bake the watch close to the fire, so as not to deform the watch by heat.

If there is water in the watch, you still have to go to the repair shop to wipe the oil and maintain it to prevent the parts inside from rusting.

First, when the watch is in water and fog, the easiest way is to wear the watch on the wrist backwards, that is, let the watch mask reflect inwards and the bottom case of the watch face outward. After a few hours, you will notice that there is less and less moisture inside the watch.

Second, prepare some paper towels or moisture-absorbing flannel, wrap the watch tightly, place it on a 40-watt light bulb about 5 cm, and bake it for about half an hour. After that, you will notice that the moisture in the movement slowly disappears.

Thirdly, fog vapor can also be removed by basking in the sun. First open the back cover of the watch, then wrap the watch completely with a paper towel or moisture-absorbing flannel cloth, and take it to the sun for most of the day to remove the moisture in the movement. If the watch is seriously flooded, it can be left for a longer time.

Fourth, after the watch is flooded, you can first open the back cover of the watch, remove the battery, and use the hair dryer to aim at the watch on low gear. After blowing until it is completely dry, reattach the back cover. When installing, you can also check whether the sealing ring is aging and broken, and remember that the back cover must be fastened if it is in good condition.

Fifth, dry the granules with silica gel. Put the silicone granular substance in a closed container with the watch that has accumulated water, and after a few hours, remove the watch and the water will disappear. This method is simple and economical, and does not compromise the accuracy or longevity of the watch.

The silica gel that has been absorbed many times can be dried at 120 degrees for several hours, and the water absorption capacity is renewable, and it can be used again and again.

If you find that the watch is flooded, you can use several layers of toilet paper or flannel cloth that is easy to absorb moisture to wrap the watch tightly, put it about 15 cm near a 40-watt light bulb, and bake for about 40 minutes, and the water vapor in the watch can be eliminated. Do not bake the watch directly near the heat, so as not to deform the glass by heating. Because although there is no moisture on the dial, there may still be water in the movement, and the movement will rust and cause damage to the movement after a long time.

After the watch is flooded, it is recommended to find a professional repair outlet as soon as possible for the master to check and deal with it, which can reduce your unnecessary losses.

There are generally three ways to enter the water in the watch, the watch is worn backwards, the desiccant is removed and the lamp is baked to remove the water, it may seem that the effect is not bad, but the fact is not satisfactory, those methods can only remove the water stains on the surface, and the water stains that penetrate into the movement can not be removed with certainty, and it is not too much to treat those small watches, but for those famous watches, if this method is adopted, I am afraid that it will be regretted in the future. If this method can be handled completely, then the repairer will not have to eat. It is recommended to send it to a professional repair point if it enters the water.

The service center provides Roger Dubuis watch strap customization, cleaning and maintenance, identification, refurbishment, fault repair, replacement of damaged watch parts, and strap replacement services. Our technicians have undergone strict professional skills training and provide two years of after-sales guarantee services. The service center is guided by the watch manufacturer on the spot**, **transparent, no hidden consumption, no additional charges.

Dear Sir Hello Madam!

Here is the customer service center, it is recommended to call ** for detailed consultation.

Whether you own a ** watch or a vintage watch, the experts at the Customer Service Center will provide you with efficient and individual solutions.

We guarantee that no matter where you are in the world, our highly skilled experts will provide you with an impeccable repair of your watch.

With an unwavering commitment to avant-garde, groundbreaking and elegance, the Rogerdubuis brand is a true master in the world of fine watchmaking. Its innovation is born out of a genuine respect for watchmaking tradition and craftsmanship.

The watch may be out of order, and the specific reason needs to be brought to the after-sales service center for testing.

The address of Chengdu is in Room 05, 24th Floor, Sichuan Aviation Plaza.

The solution to the water in the watch and the fog on the mirror:

Wrap the watch tightly with several layers of toilet paper or flannel cloth that is easy to absorb moisture, and bake it under the light bulb for about 30 minutes to eliminate the water mist inside, but do not put it close to the light bulb or bake it directly, so as not to cause the surface to be deformed by heating.

Wear the surface inwards and the bottom case outwards on your wrist to remove the mist from the surface after a few hours.

If you have silicone, you can put the silicone and the watch in water into a closed container, and after a few hours, take the watch out again, and the water mist in the watch will disappear.

If the water ingress of the watch is serious, it is best to send it to a watch shop to wipe the oil and eliminate the water in the watch to avoid rust on the parts of the watch.

Note: In order to prolong the service life of the watch, you should try to avoid fog and water droplets in the waterproof watch, do not wear the watch when washing your face, bathing, swimming and other "hydrophilic" activities, do not be affected by water vapor and hot vapor, and pay more attention not to be exposed to rain on rainy days.

What should I do if my watch gets water?

1. If the watch is soaked in water, you can wrap the watch tightly with several layers of toilet paper or flannel cloth that is easy to absorb moisture, put it at about 15 cm near a 40-watt light bulb, and bake it for about 30 minutes, and the water vapor in the watch can be eliminated.

2. Put it in a rice jar and bury it deep in the dried rice for a period of time, if it is fast, you can see obvious results in one night.

3. You can use a granular substance called silica gel to put it into a closed container with the watch that has accumulated water, and after a few hours, take out the watch, and the water will disappear.

4. Take a hair dryer to dry, and then apply a layer of transparent nail polish on it to avoid impurities and prevent rust.

5. If there is water vapor in the watch, you can wear the watch face inward and the bottom shell outward, and wear it on the wrist to eliminate the water vapor in two hours. If there is too much water in the watch, the case must be opened and scrubbed. If you are not sure to deal with it yourself, you should send it for repair in time.

If there is a problem with the watch, call the customer service first, and the customer service in Guangzhou can try to call the 29872673Remember to add the area code of Guangzhou in front. Then the customer service will tell you how to go after the sale. To the after-sales inspection and maintenance, just follow the process.

How to solve the mainspring failure of the watch: There are about three types of clockwork faults: the middle of the mainspring is broken, the outer hook of the rod is broken, and the inner ring is broken.

There are about three types of mainspring faults: the middle section of the mainspring is broken, the outer hook of the strip is broken, and the inner ring is broken, and the repair method of "broken strip reconnection" can be adopted. After the spring is broken at the inner hook, the inner ring of the spring can be clamped with tweezers.

If the mainspring of the watch is broken close to the outer hook, you can use the waste spring to make a new outer hook and use it.

The accuracy of a mechanical watch cannot be achieved or maintained by correction Why do you say that? That's because the timing of a mechanical watch is constantly changing, relative to a state of tightness of the mainspring, a fixed position, it can be temporarily accurate at a temperature, but relative to another situation, there will be changes, and it will be different immediately.

In other words, even if you correct the watch for one second, you will find that it will not be maintained, and the accuracy will always change in instantaneous and fluctuating times. Moreover, there are many other factors that affect the accuracy of the watch, and the watch error we see can only be an actual and average error per unit of time.

There are many reasons why the watch does not go, and you need to take it to the after-sales service center for testing to know.

The address of Chengdu is in Room 05, 24th Floor, Sichuan Aviation Plaza.

Hello, glad to answer for you!

Reasons for inaccurate time: insufficient kinetic energy reserve of the watch, insufficient battery of the watch, the watch has been hit or hit by an external source, the watch has not been maintained for a long time, and the watch is affected by magnetic fields.

Solution: It is necessary to go to the after-sales center for testing and maintenance.

If you have any questions, please call** Please feel free to call.

Hello, glad to answer for you!

Reasons why the watch is not running accurately:

1. Insufficient power reserve. If the amount of exercise is small, it may also cause a lack of power reserve, so you can replenish the power by winding it manually, and then observe whether it continues to be fast or slow.

2. The watch has been hit or impacted, which may cause loose damage to the internal parts and may also cause the problem of running time.

3. The lack of oil in the movement or the wear and aging of the internal parts may cause the problem of running time, which needs to be maintained.

4. The watch is magnetized: If the hairspring of the watch is magnetized, the watch will not be accurate. The influence of the wearer's usage habits may cause an increase in the time error. Sending the watch to a repair center for inspection and adjustment will restore the watch to its normal tolerance.

Roger Dubuis is not allowed to leave the time:

Effect of swing.

The impact of location changes.

Effect of temperature changes.

Effect of magnetic field.

The impact of shock vibrations can be reachedChaoyang District 11th Floor, Central World Trade CenterOver here.

Roger Dubuis after-sales point is located on the eighth floor of Block E1, East 1st Office Building, No. 1 East Chang'an Street, Dongcheng District

The main reasons for the slow running time of the mechanical watch are: insufficient activity and insufficient kinetic energy; The watch is magnetized; The movement oil sludge is dry, etc.

Automatic watches need to be worn normally for about 8 hours a day, and need normal and appropriate exercise kinetic energy to support the time, and wearing 8 hours a day can support 36 hours of time.

Generally, the watch is close to the magnetic field, such as placing it next to electrical appliances (such as stereos, refrigerators, computers, etc.) that generate magnetic fields, and magnetic objects (such as magnets, mobile phones) will cause magnetism, which will affect the watch to run fast or inaccurately or temporarily stop. If the oil in the watch movement is dry, it will increase the frictional resistance between the parts in the watch, causing the watch parts to be damaged and unable to operate normally.

The above four are common faults of mechanical watches slowing down, how to judge the reasons for their mechanical watches slowing down, you can judge according to the above four, if you are not clear, you can go to Room 808, 8th Floor, Block E1, Oriental Plaza, East Chang'an Street, Dongcheng District, Beijing, with an instrument to detect, so that it is more safe.