How to connect Apple routers to network monitoring

You can create a broadband connection for your Apple computer by following these steps:

1. Mac version:

System Provisioning Networking New Location Create a new location Customize the name, as follows: Broadband connection, display Built-in Ethernet PPPoE Select the connection to use PPPoE Enter the account name and password Select the storage password Select to show PPPoE status in the menu Now apply, you can create an ADSL broadband connection;

2. Apple system (Mac OS X version:

System Provisioning Network New Location Create a New Location Network PPPoe Connection Use PPPoE Pick" "Account Name Password Show PPPoE Status Pick in the Menu Bar" "Now apply, you can create a PPPoE broadband connection.

The following is the complete setup process for the old surveillance (no penetration), ignoring the camera installation.

First, the monitoring side.

1. Connect to the network: Use a network cable to connect the monitor to the router.

2. Set IP: Set your own IP to fixed in the monitoring host, or set the IP of the monitoring host to a fixed IP in DHCP in the router

4. Set DDNS: Turn on the DDNS function in the router, and register according to the recommended DDNS in the router, remember to copy the username and password after registration. Go back to the router and fill in the DDNS username and password you just registered in the DDNS option.

Select DDNS "Start (or Login)" (this must be noted, I forgot to click Start or Login, but I checked the whole process to find out), and finally copy the domain name in DDNS after starting (login).

2. Mobile phone or computer.

2. Enter the settings, a. Monitoring name: fill in at will, you can write: "my monitoring" or "store monitoring", etc.

b. Monitoring domain name (or IP): Fill in the last transcribed DDNS domain name, which is the domain name (virtual domain name) converted from DDNS

c. Username and password.

The username and password for the monitoring are entered.

It should also be noted that the "data connection" cannot be intercepted by the security software, and some security software likes to let users use the software under "WiFi only", resulting in some apps not being able to pass the "data connection".

After changing the modem, the general staff sets up the modem dial-up and assigns the IP, which is equivalent to a router.

There are 2 ways to connect your wireless router, connect to the WAN port, connect to the LAN port, and the following is the setting of the WAN port.

First of all, figure out the IP segment of the optical modem (assuming that the modem is, you can set the WAN port as a fixed subnet mask.

Gateway, 1LAN port is changed to (use this IP to enter the router management in the future) to turn on DHCP, and fill in the DNS easily

The wireless part is set up normally.

Finally, the line is connected to the WAN port of the router.

Look at what kind of projector it is, it is generally divided into two types: wireless and wired.

1. Wired: If it is iPhone5S, then you need to buy a special HDMI Apple cable, and directly connect the HDMI interface between the iPhone and the projector to display.

2、Wireless:At present, the well-known domestic brand Cool Le TV has a micro projector Cool Le TVQ6,It can be point-to-point or in wireless LAN mode through airplay for same-screen mirror transmission,It is said,At present, Cool Le TVQ6 is the first projector in the country to support complete and Apple mirror transmission。

This problem has met me.,First of all, don't move your phone.,It has nothing to do with the phone.,Don't listen to what people say about flashing the phone.,The password is wrong.,Don't listen to what people say to reinstall the system.,As long as it's related to the phone, the gods and horses are floating clouds.。

The reason is that the ID obtained by your mobile phone before does not match the current router! The next thing to do is to re-obtain and re-match, reset your router, this is not to turn off the power, but to restore the factory value of the router, and then reset the router, set it up and see if your phone can be connected to the Internet, and it does not appear.

WPA WPA2 has been retired

PSK for protection.

A wireless router can be set up on a mobile phone.

If it is a broadband cat connection wireless router that requires dial-up, set it up as follows:

1. Plug in the wireless router, don't answer the cat first, and connect the mobile phone to the wireless network of the wireless router;

2. Enter the IP address of the router in the address bar of the browser (on the label behind the router), and enter the login username and password to enter the settings page;

3. Set up according to PPPoE (ADSL virtual dialing) mode, enter the Internet account and password;

4. Set the SSID, encryption method and password;

5. Save and restart;

6. After setting, connect the network cable from the cat LAN port to the WAN port of the wireless router.

Open the settings, click on the wireless LAN, and enter the password in the link.

Here's how to set up a router on your phone:

1. First, connect the router and the broadband modem with a network cable, and the connection method is to connect the LAN port of the broadband modem with the WAN port of the router through the network cable.

2. After the hardware is connected, use the mobile phone to connect to the wireless signal of the router, then open the mobile phone browser, enter the login address and login password of the router, and select Quick Settings after logging in to the background.

3. Then fill in the broadband account number and password as required.

4. Then set the wireless name and password to save and then the router can be used normally.

No, you're not routing yourself but telecom wireless, and telecom is identified by the device code first. You have to make sure that the account and password opened for you by Telecom are successful, and Telecom is a web authentication.

Is it in the Security option where you didn't choose the encryption method?

Step 1: Install the airport software (buy the CD that comes with the router) Put the CD included in the box into the CD-ROM drive, and execute the installation procedure. Note that this configurator can only be used under XP! (You can also use this software that comes with Apple's system).

Step 2: Configuration.

Click Start Menu, Airpot-Airpot Setup Assistant, to open the Setup Assistant program. In this step, select the configuration method, and select the first item for the first time. Click Next to continue, and the configuration here is more important.

"Wireless Network Name" can be filled in with a meaningful name to distinguish it from other networks. It can also be left unchanged, "wireless security" is chosen according to your own needs, mainly to prevent unauthorized computers from accessing the network. If the network is dedicated to the LAN and you don't want outsiders to access it, you can choose to encrypt it, so that only people who know the access password can use the network.

The "Airport Express Password" is the password that needs to be entered when changing the router settings, and only those who know the password can change the router settings, so don't forget it! Once you have confirmed that your entry is correct, click Next. Here is the summary information, confirm that your information is correct, click "Update", and then the router will automatically restart, please be patient.

This means that the router is already available for preliminary use, but the user who is using it cannot use it at this time. Repeat the first step to open the "Airport Management Utility", click on the wireless network on the left, click "Configure", enter the wireless router password you just set, and confirm. The "Upgrade" button is worth mentioning here.

If you are using the Internet, please upgrade the firmware to the airport tab. First, select "Point-to-Point Protocol over Ethernet" in "Connection Usage". In the Account Name field, fill in the account number provided to you by your ISP.

Then click "Change Password" and fill in the password you dialed in. If you are using the Internet on an annual subscription, you can select Always connected. Others can remain default.

Network tab. This is the setting of the intranet IP, Apple's habit is, that is, the IP address of the wireless router. You can leave it as default or choose your own.

I'm dizzy. Your computer is connected to the Internet with an adsl account, but wifi is a password set separately, for example, if you open the door. If you want to get in, you've got to have a house key.

You use your computer to open IE input, if you haven't changed the router IP is this address).

Then you look for it, there is 1 stop is to set the wireless wifi key, you remove it, and there is another possibility that when you use your mobile phone to connect to wifi, the laptop is not turned on.?

Because your router is set up to manually log in to ADSL, you have to enter the password. And you're a laptop that wirelessly connects to the router before logging in.

When you use your mobile phone to connect to wifi, is the laptop not turned on.? Since it didn't turn on. You can't enter the ADSL login password.

The solution is still to type in IE and you look for it. There is 1 bar that is automatically connected to ADSL

Finally, if you want to go in, you will be prompted to enter the account password. Then you go and see what you will write at the bottom of your router!

Connect the router with a computer and then log in to the settings page of the wireless router (http:Then you can find the place to let the router automatically enter the broadband account name and password in the settings page (I forgot what it was called...). Sorry ah) Then set the router to automatically log in to your broadband account, and then whether your computer or iphone is connected to the router, you can directly access the Internet, no need to enter the broadband account.

I'm racing, cancel the wifi key in the route, then not everyone can share your wifi

I'm at home now, and the router has set the password for the wireless connection.

Any computer or wifi product wants to connect to my wireless network, must provide a password what iphone does not support, it is nonsense.

Looking at this problem, it is not a problem with the iPhone and password at all, but a problem with the settings of the wireless router.

Comrade Jasnans made it very clear, and I will add that you can succeed by following his method, because your main problem is to enter or enter the wireless routing settings in the method of setting up the wireless route.

Find the ** item of WAN settings, set the connection type to PPPoe, and there will be a username and password at the bottom.

Enter your ADSL username and password here, and if you're on a monthly subscription, set it to log in automatically and save it to restart your wireless route.

At this time, use your iphone to search for wifi, you should be able to access the Internet, and after all of the above is done, then set a wifi password through the router, or your neighbor can use your wireless network for free.

Because now in the company, the interface of home routing is not too clear, and what is said is the general process good luck

It should go into your wireless router, (or (just set up your ADSL account inside your wireless router.) It has nothing to do with passwords. Once you have set it up, you can use it with both your laptop and your iPhone.

Set your router to auto-dial.

Of course, it's better to be encrypted.

Because your wireless router does not have automatic dialing, you need to set up your wireless router first, set up the dialing account and password according to the setup wizard, restart the routing, and then you can get started.

Turn on IE input with your computer.

Set your router to auto-dial.

It will be automatically connected in the future.

Set your wireless router to auto-dial and you will be able to surf the Internet every time your iPhone is connected.

Renzig was thoughtful, and as he said, the password for the route had to be removed because the iPhone didn't support this kind of encryption.

Go to the Baixin mobile forum

Or I'll look it up in the forums for you.

You want to control the monitoring of the mobile phone, this function is generally a remote function, not how to connect your network cable, and the chaos means that you have to use the software to carry out relevant operations to achieve what you say.

You** their operation code software on the mobile phone, each brand generally has an app corresponding. Login and password, there are corresponding operations, allowing you to operate.