Are the installation steps of the fresh air system the same as that of the air conditioner?

1. The location of the indoor unit of the air conditioner.

Generally, it is required to be installed horizontally on a stable and solid wall, and its air intake and outlet should be kept unobstructed, at least one meter away from the TV to avoid interfering with each other, and away from heat sources and flammable places. Do not move the air conditioner near high-frequency equipment

The place where the high-power radio installation should not interfere with the normal operation of the air-conditioner, there should be room at both ends and above to ensure that the space with obstructions meets the requirements, and it should be placed in a well-ventilated location with easy drainage, and should not be installed near the door, and placed in a place that can reduce noise.

2. The installation position of the outdoor unit of the air conditioner.

It should be installed horizontally on a stable and solid wall or rooftop or balcony, and its air inlet and outlet should be kept unobstructed to avoid direct sunlight, and if necessary, it should be equipped with a sun visor, but it should not obstruct air circulation, and the hot air and noise emitted should not affect neighboring households, and should not be placed in a place with strong wind and dust, and should not be close to heat and flammable sources, and should not affect pedestrians. In order to keep the air smooth, there should be a certain amount of space left in the front and back, left and right of the external unit. Try to choose the outdoor unit of the air conditioner without the northwest wind to ensure that the space with obstacles meets the requirements.

3. Installation of connecting pipes.

Split wall-mounted type should not exceed 5 meters, less than four horses of split cabinet type should not exceed 10 meters, about five horses of split cabinet type should not exceed 15 meters, outdoor unit as far as possible lower than the indoor unit height difference of less than 5 meters, can not have a flattened place.

Choose a high-quality connecting pipe, the layout of the drainage pipe, the drainage hose must go down, if the outlet is bent or upward, it is difficult to drain, and the indoor unit will leak. When the power supply load is insufficient, it is necessary to set up a special line and confirm the power supply voltage, because if there is no special line, there will be problems such as tripping. If the specified voltage is added, the protection circuit will start working and the air conditioner will not be used.

1. Avoid blowing the air conditioner directly on people: try not to face the bed with the air conditioner in the bedroom, if the bedroom air conditioner is facing the bed, the low temperature will not only easily cause people to catch a cold, but also the noise from the non-silent air conditioner hanging on the head of the bed will also affect the quality of people's sleep.

2. Prevent rainwater from backing up from the air-conditioning hole: The air-conditioning hole has been slightly adjusted, which not only prevents rainwater from coming in along the air-conditioning hole in heavy rainy days, but also avoids the backflow of air-conditioning water caused by the drip pipe's "high outside and low inside".

3. Equipped with installed air conditioning sockets: air conditioners are high-power household appliances, and the high power of ordinary sockets often cannot meet the electricity demand of air conditioners, which can easily cause overheating and leakage of electricity in the line. Therefore, choosing an air conditioner socket not only avoids leakage, but also has a switch on the socket as much as possible to turn off the power to save power.

Fourth, arrange hidden wiring to keep the bedroom beautiful: no one wants to pull out a lot of wires in their bedroom, which is neither beautiful nor safe, so try to place the position of the socket and the installation position of the air conditioner closer, so that the power cord will not be exposed.

Household wall-mounted fresh air system installation:1Punching holes (holes for air intake and holes fixed for the machine) 2Install it.

The air conditioner has an indoor unit and an outdoor unit, and it also has to be punched, and the pipe is OK, which is almost the same, but there is still a difference.

1. Coordinate with hydropower facilities. The installation of air conditioning facilities should be coordinated with the water and electricity facilities in the home to provide convenience for future use, and the installation of household air conditioners should be even more so. Due to the hidden installation of household air conditioners, if they are not designed and installed in coordination with hydropower facilities, they will not only be inconvenient to use, but also very inconvenient to install and adjust in the future.

2. The installation of household air conditioners is earlier than home decoration. Since the home** air conditioner is installed in a concealed manner, its installation should be carried out before the home renovation. In addition, in order to coordinate with the overall decoration style, the home decoration plan should have been determined before the installation of household air conditioners, so as to determine the installation location and air duct direction of the indoor unit of the air conditioner on the basis of ensuring the effect of air conditioning.

Under normal circumstances, the indoor unit of the air conditioner is installed in the local ceiling outside the aisle, and the air duct can be hidden by the method of local ceiling, so as to determine the size and location of the air supply outlet and return air outlet.

3. Pay attention to supervision during installation and construction. In order to ensure the successful installation of household air conditioners, in the process of installation and home decoration, the installer should pay attention to the on-site inspection work during the construction period, so as to find and solve the problem in time. During the construction process, the matters that need to be monitored include whether there is any change in the pressure gauge, whether the ceiling height is appropriate, whether the refrigerant copper pipe and condensate drain pipe are damaged, and whether there are problems with the size and location of the air supply and access ports.

It is necessary to pay attention to the laying of lines, the laying of pipelines, the safety issues, the smooth flow of air, and reasonable planning.

Point 1** Air conditioning installation is very complicated, and the whole installation process is the need for the entire inspection port, the second point of the installation of the fresh air system is relatively simple, because the new air conditioner it is from the entire installation to a later maintenance is a full range of improvements, the third point, different air conditioning installation should pay attention to the corresponding instructions, and matters to be noted.

**Air conditioning and fresh air system can be installed at the same time, and the overall effect will be better, **air conditioning can not eliminate indoor turbid air, this fresh air system can be solved, and ** air conditioning solves the problem that the fresh air system can not be refrigerated.

The installation is divided into three parts, namely: the installation of the main engine, the installation of the pipe, and the installation of the air outlet and exhaust outlet. The installation of these three parts is complementary to each other, if one of the installation is not in place, it will affect the fresh air conditioning system.

The overall effect, let's talk about it one by one.

1. Installation of the host. The installation of indoor fresh air conditioning system is generally carried out after the completion of water and electricity, before installation, it is first necessary to determine the installation position of the main engine, pipes, exhaust outlets and air outlets, and mark them. The installation requirements of the host are positive, flat and stable, and the host is generally installed in the balcony or bathroom, preferably away from the bedroom, and the location should be selected in the place with the least overall required air duct length, so as to reduce the pipe resistance and ensure the fresh air effect.

Moreover, the host should be fixed firmly to avoid the phenomenon of excessive sound during operation.

2. Installation of pipelines. Most of the fresh air pipes use PVC pipes with longer service life, and the pipes are equipped with one hanging wire every 150c cm. The installation of pipelines is required to be "horizontal and vertical", and at the same time, the joints between the pipes need to be coated with special PVC glue to ensure the reliability of the connections.

3. Installation of air outlet and exhaust outlet. The air outlet is generally installed above the window in the living room or bedroom; The exhaust outlet is generally installed on the ceiling of the bathroom, so that the indoor dirty air can be discharged through the exhaust outlet through the main engine.

The above are some of the matters that need to be paid attention to in the installation of the fresh air conditioning system, and I hope to help friends in need.

Nowadays, many people have installed fresh air systems in their homes, which can improve air quality and improve health. Do you need to install air conditioning when installing a fresh air system? PChouse will take you to find out.

First of all, the fresh air system cannot replace the air conditioner, and the air conditioner cannot replace the fresh air, so it is recommended to install both.

In terms of function, air conditioning regulates indoor temperature through cooling and heating, while the fresh air system uses the circulation of indoor and outdoor air to ensure indoor air quality. The two complement each other when it comes to improving living comfort. **The air conditioner uses the function of cooling and heating to keep the human body at a relatively comfortable temperature, and the fresh air system can ensure the freshness of the indoor air.

Compared with the "fresh air function" of the air conditioner, the biggest advantage of the fresh air system is that it can exhaust the indoor dirty air to the outside, and filter the outdoor air extracted more carefully and thoroughly. Therefore, it is not possible to use the ** air conditioner with the "fresh air function" to directly replace the pure leakage fresh air system. Therefore, the air and fresh air equipment are two independent systems indoors, one is to regulate the temperature, and the other is to improve the quality of indoor air quality, which respectively solves two problems in our residential environment.

If the house already has a fresh air system, but you want to install an air conditioning system, you can consider the following steps:

1.Determine the type of air conditioner: First, determine the type of air conditioner you need, such as ** air conditioner, split air conditioner or multi-unit air conditioner, etc. Choose the type of air conditioner that suits your needs and budget.

2.Locate the location of the air conditioner indoor unit: According to the layout and needs of the room, determine the best location of the air conditioner indoor unit in each room. Consider factors such as the installation height of the indoor unit of the air conditioner, the location of the vents and power outlets.

3.Install the air conditioner indoor unit: Install the air conditioner indoor unit in the selected location, making sure that the power supply and air inlet are properly connected. If possible, connect and lay out the air duct of the air conditioner indoor unit with the fresh air system.

4.Install the outdoor unit of the air conditioner: according to the model and specifications of the air conditioner, install the outdoor unit of the air conditioner in a suitable position. Ensure good ventilation, noise control, and ease of maintenance.

5.Connecting pipes: Connect the refrigeration pipes and wires between the indoor unit and the outdoor unit according to the actual needs.

6.Configure the control system: Install and configure the control panel of the air conditioning system so that you can conveniently control the temperature and other settings of the room.

7.Test and commissioning: After the installation is completed, ensure that the necessary lifting test and commissioning are carried out to ensure the normal operation and temperature regulation effect of the air conditioning system.

The house has been installed with a fresh air system, how to install air conditioning.

Hello dear, glad to answer for you, <>

The house has been installed with a fresh air system, and the method of installing air conditioning is as follows: 1. The installation of the host is carried out according to the installation design drawing of the fresh air system, the first is the installation of the host, the host is generally installed in the ceiling of the balcony, kitchen or bathroom, and the installation position of the host is selected in the place with the least required air duct length to reduce the pipeline resistance. 2, the installation of the pipeline pipeline installation needs to consider the arrangement of the pipeline to minimize the loss of air volume pipeline installation is the use of PVC pipeline, its brother orange thick service life and the same as the building, pipeline every 150cm an elevator, the pipeline requires horizontal and vertical, each joint Wu Yan padded PVC glue, to ensure the reliability of the pipeline connection.

3. The connection between the main engine and the pipeline The connection between the pipeline and the main engine: the connection between the pipeline selected by the project and the air inlet and exhaust outlet of the main engine is a variable diameter or funnel type reducer, and the seam is fixed with tin foil adhesive tape, and the requirements are: the tape is pasted flat and can not be wrinkled, the seam should be glued tightly, and the air leakage should not be leaked, and the tin foil joint should be tied with a cable tie.

Thank you for your consultation, I hope this service can help you, you can click on my avatar to follow me, and if you have any questions in the future, you can consult me again. I wish you a happy life, a happy family, good health, and all the best <>

The working principle of fresh air air conditioning is different from that of traditional air conditioning, which purifies the outdoor air and introduces it into the room through an external circulation device and a filtration device. Next, PCHOUSE will introduce you to how to install fresh air conditioners.

First, the installation of the host.

According to the installation design drawing of the fresh air system, the first is to install the main engine, the main engine is generally installed in the ceiling of the balcony, kitchen or bathroom, and the installation position of the main engine is selected in the place with the least required air duct length to reduce the pipeline resistance. The main engine should be fixed firmly, so as to avoid loud operation, and the lower ceiling should use a movable roof or leave a maintenance opening.

Second, the installation of pipelines.

The installation of pipelines needs to consider the arrangement of pipelines to minimize the loss of air volume.

Pipeline installation using PVC pipeline, its service life and the same as the building, pipeline every 150cm an elevator, pipeline requirements horizontal and vertical, each joint smeared with PVC glue, to ensure the reliability of the pipeline connection. Pipeline hose area, every 70cm a elevator, elevator bolts using long bolts. Although the pipelines of the fresh air system are more complicated, these pipes are hidden in the ceiling after the decoration is completed.

Third, the connection between the main engine and the pipeline.

The connection between the pipeline and the host: the connection between the pipeline selected by the project and the air inlet and exhaust outlet of the host is a variable diameter or funnel type reducer, and the seams are fixed with tin foil tape, and the requirements are: the tape is pasted flat and can not be wrinkled, the seams should be glued tightly, and the air leakage should not be leaked, and the tin foil joint should be fixed with a cable tie.

Fourth, the installation of tuyere.

The tuyere installation should be firm, and the location should be reasonable to fully ensure the use effect.

The exhaust air outlet is installed on the ceiling of the bathroom and kitchen, and the indoor air enters the main engine through the exhaust outlet, and then enters the flue through the main engine. The fresh air vent is small, beautiful, and does not take up space, and is installed above the window in the living room or living room, so that fresh outdoor air can enter the room. In the installation of the tuyere of the fresh air system, it should be noted that the height of the same tuyere in the same hall and room should be consistent, the arrangement should be neat, and the horizontal deviation of the horizontal installation of the tuyere should not be greater than 3 1000.

Fresh air system is a systematic project, and a good product must be equipped with a good design and installation in order to maximize the effect of the product.