How do you turn off Sony FS7 when it s flashing red?

Sony FFS 7 How to turn off when the red light is flashing, if it can't be turned off, just directly pick the battery to directly buckle the battery and turn it off directly.

If the red light flashes, in this case, you can choose a red button in the lower right corner, click off or press and hold the power off button to restart.

If the Sony flashes a red light, it indicates that its power is not enough, and it can be solved by turning off the power directly and continuing to charge it.

If the Sony FS7 flashes a red light, just unplug it.

1. Focus in the dark, because the light is insufficient, the auxiliary light will be flashed in order to measure the focus data and autofocus. 2. Before taking a photo with anti-red eye, it will also shine to make people's eyes adapt.

Sony f a c in Shaanxi red light how to turn off, if the flashing red light proves that the light outside you don't match the camera, you put the camera in the dark he is naturally not stupid with this red light.

Sony FS7 flashing red light how to turn off. This can be turned off, according to the previous or the next one.

Tyny's side doesn't know. Seven, why can't you turn off the red light when it's flashing?I don't understand this.,You have to find a professional.,I don't know these five pinyin.,Two pinyin don't know how dare I explain to you.。

If you go on the red light, it means that the battery is running low, so you need to charge it.

Sony daughter-in-law h7 in the flashing red light how to turn off here is its switch machine read the manual.

Sony FS 7 how to turn off the flash?You can turn off the flash in the settings.

If you use FS 7 with the flash turned off, we can also make it convenient for all of us.

So how do you close it?In this case, you can just shut down and restart, and then you can do it.

Sony FS7 flashing red light how to turn off. Just turn it off normally.

If this problem occurs with this unit, it may be a faulty switching power supply circuit, but it is more likely that the motherboard circuit is faulty.

The treatment is as follows: First, measure whether the voltage of each group at the output end of the main switching power supply circuit is normal.

If the measurement is normal, it means that the switching power supply circuit is no problem, otherwise it is the switching power supply electricity.

Road problems. Since the above measurements are normal, but the power-on test machine failure is still the same, at this time it is suspected that it may be a problem with the motherboard circuit, so in the measurement of all DC-DC voltage conversion circuit chips on the motherboard, whether the pins of each output terminal are normal to the ground, if there is any abnormality, check the components around the abnormal pins of the chip.

If the above measurements have restored the circuit to normal, in case it is not turned on, then this problem is to focus on checking, and the CPU on the motherboard can turn on the standby circuit components.

LCD TV (liquid crystal display), also known as liquid crystal display, LCD, uses a substance between solid and liquid state, organic compounds with regular molecular arrangement, heated to present a transparent liquid state, after cooling to appear crystalline particles of a turbid solid state of substance. The world's first liquid crystal display device was manufactured by Sharp in Japan in the early 70s of the 20th century, and was called TN-LCD (twisted nematic) liquid crystal display.

5ex710 automatically shuts down from time to time, the red light flashes 7 times is the temperature alarm, the possibility of the motherboard is relatively large, and the screen has also encountered this problem.