How long is the warranty period for a Gesulati watch?

The warranty period for Glashütte watches is 2 years. If there is no brand after-sales service in your area, do not go to the stall for repair, it is recommended that you go to Lao Tzu Good Watch Store to test and repair it.

Room 2513, 25th Floor, Diwang Building (Shun Hing Plaza), No. 5002 Shennan East Road, Luohu District, Shenzhen, Guangdong Province] will answer for you.

Maintenance common sense. 1) When wearing a watch, the sweat on the hands is corrosive to the case, the all-steel case is better corrosion resistance because it is nickel-chromium alloy, and the semi-steel case is copper, which is in contact with sweat for a long time, and is easy to corrode, so you should often wipe off the sweat with a soft cloth or put on a plastic watch holder to prevent it from being eroded by sweat.

2) Do not open the back cover of the watch at will, so as not to enter the movement and affect the normal operation of the watch.

The service center provides services for customisation, cleaning, maintenance, appraisal, refurbishment, breakdown repair, replacement of Glashütte watch exterior parts, and strap replacement services. Our technicians have undergone strict professional skills training and provide two years of after-sales guarantee services. The service center is guided by the watch manufacturer on the spot**, **transparent, no hidden consumption, no additional charges.

Hello, glad to answer for you.

There are many parts inside the watch that are made of steel, such as hairsprings, large and small steel wheels, screws, bearings, and escape wheels, which are easily magnetized by magnets, magnetic fields, etc.

The speed of a watch is controlled by a hairspring, one of the most magnetized parts, and a balance wheel.

If the watch is magnetized, it is recommended that you bring the watch to a regular after-sales center for demagnetization treatment, so as not to affect your normal use.

Recommendations for the use of mechanical watches:

1. Watches with manual winding movements should be wound at the same time every day as far as possible so that the watch has enough energy to operate in the next 24 hours.

2. The energy of the watch with automatic movement is ** in the movement of the wearer's arm, so there is no need to manually wind it under normal wearing, only when the wearer's exercise is not enough to replenish enough energy to the mainspring, it can be compensated by manual winding, and the crown rotation is controlled within 20 laps when winding.

3. For a self-winding watch that has not been worn for more than 40 hours, the crown should be turned 20 times to reactivate the movement when worn again.

4. In order to prevent moisture from penetrating into the case and maintain the waterproof performance of the watch, please make sure that the crown is locked at all times.

Hello, glad to answer for you.

1. In order to ensure the normal operation and accuracy of your watch, we recommend that you should maintain your watch regularly2. Conduct a waterproof test and appearance cleaning of your watch once a year.

3. Watches with mechanical movements should be maintained every 3-5 years.

4. This not only keeps the watch in good running condition, but also effectively prolongs its service life. However, the above warranty service is only applicable to watches under normal wear conditions, and does not include watches that are worn abnormally or subjected to constant shocks.

Maintenance Method:

1. Wearing a watch, hand sweat is corrosive to the band, steel case, because it is nickel-chromium alloy, corrosion resistance, semi-steel copper case, and sweat, easy to corrode long-term contact, should often use a professional watch to clean the machine watch or pad the plastic watch to prevent it from being eroded by sweat.

2. Do not open the back of the watch at will, so as not to affect the normal operation of the watch.

3. Don't put your watch in the closet, mothballs will spoil the watch oil.

4. Do not put the watch on the amplifier, stereo, TV, so as not to magnetize.

5. If you store a mechanical watch that you don't wear for a long time, you should exercise regularly for a short period of time every month, and the automatic movement watch should gently swing back and forth on your wrist for a few minutes or a period of time. Therefore, this part will not be stationary for a long time to guarantee the normal operation of the performance of the watch.

Hello, we are a large watch repair agency with stores all over the country, since you don't know your area, you can call our national service**: 400-106-3365 to ask our customer service staff about the detailed address of the store closest to your city and various questions about the watch. Watch maintenance discount, two watch maintenance 7% discount!

The Glashütte Watch After-Sales Service Center is located in Room 918, 9th Floor, Landmark Plaza, Nanjing East Road Pedestrian Street, Huangpu District, Shanghai. Gently rotate the crown until you can feel a slight urgency.

The watch should be maintained every 1 to 4 years, replacing the waterproof components, checking the function of the time and the power consumption of the movement, cleaning the movement and maintaining the appearance. This kind of maintenance will effectively extend the service life of your mechanical watch.

Daily maintenance of the watch:

1. Do not put the watch on the stereo or TV to prevent magnetization.

2. Do not put the watch in the wardrobe with mothballs to prevent the watch oil from deteriorating.

3. Do not touch the watch with corrosive substances, especially acidic substances, which will corrode the case.

If your watch needs maintenance, you can click on my homepage** to consult, I hope to help you. It is not difficult to take care of your watch on a daily basis, as long as you can do these things on a regular basis, you can trust that your watch can always be kept in the best working condition.

It is recommended to choose a professional repair center to avoid losses to your watch, the specific situation needs to be tested and processed by a technician, it is recommended to call ** detailed consultation.

Shanghai Glashütte Watch Service Center is located on 11F, South Block, Hong Kong Plaza, Huaihai Middle Road, Huangpu District

How to care for your Glashütte watch:

1. Waterproof watch: Be very careful in daily use and don't let the case fall into the water. Don't underestimate the destructive power of water. There are many examples of watch movements that cause corrosion and rust due to water ingress.

2. Dust of the watch: The harm of dust does not have to be more serious than water, so you must be extra careful when using a mechanical watch every day, dust may seep into the watch through the gaps in the case and adhere to the watch, a large amount of dust will accelerate the drying of the surface oil, resulting in an increase in friction between various parts of the movement, thus causing problems in use. In general, we don't have a lot of dust to come into contact with.

Regular cleaning of the enclosure can effectively deal with the situation where dust enters the enclosure.

3. Watch anti-magnetic: Electromagnetism is the third major hazard of the watch, if the watch is magnetized, it will cause the watch to act inaccurately, or even stop completely, therefore, when storing the watch, you should try to avoid contact with magnetic objects such as audio and TV, if magnetization occurs, please demagnetize in time. so as not to affect the normal use.

4. The watch that has not been worn for a long time should be tightened regularly: Friends who have conditions must not only have a watch, but also must wind the watch for a long time to ensure that the parts do not move for a long time to ensure the performance of the watch.

5. Regular watch maintenance: In addition to the above points, professional watch maintenance is also very important. Mechanical watches should be used every 1-2 years.

Take the watch to a professional watch shop or after-sales service center for a comprehensive inspection and professional maintenance, such as cleaning the sludge, only in this way can the watch be in the best working condition and extend its service life.

There are three reasons for inaccurate time:

First, the power is insufficient.

The power required by the watch is not the same, like a mechanical watch, it relies on the shaking of daily wear to store power, if you don't wear it for a long time, there is no power, then the watch will definitely stop or slow down. The manual one needs to be wounded up and down from time to time, and some rely on electronics to maintain rotation, so if the watch is inaccurate recently, it is likely that the electronics are out of power and need to be replaced.

2. External interference.

This is whether you pay attention to it when you wear it daily, for example, watches are relatively squeamish, waterproof, anti-magnetic, and shock-proof, if you don't do a good job, it is normal for the watch to be inaccurate. If you wear a watch that cannot be worn for strenuous exercise, and you wear it to play golf or badminton, the strong vibration may cause damage to the parts inside the watch, and the watch will not be accurate.

In addition, it is a cliché that watches are afraid of magnetism, if your job is to engage in some research things and need to be in frequent contact with large electronic devices, then try not to wear a watch, because the magnetic field existing around it will disturb the normal walking of the watch. Some people say that the watch is bought to wear, and the baby is not good every day, so why buy it? That's true, but you should also be careful when wearing it.

3. Proper maintenance.

The watch is more precise, there are more small parts, and the mutual fit between the parts can operate normally, so the haul is indispensable for friction, so the watch is oiled, and it will inevitably dry up after a long time, plus there may be some impurities into the watch, so it will cause the watch to go inaccurate, at this time you have to go to maintain it, clean up the watch.

Five common reasons for watch time error and watch time inaccuracy:

1: Insufficient power reserve: You need to check whether the power is sufficient, if the amount of exercise is small, the power reserve may be insufficient, you can supplement the power by manual winding, and then observe whether it continues to have the phenomenon of fast and slow.

2: Insufficient power: If the quartz watch suddenly finds that it is slowing, it is likely to be caused by insufficient battery energy, and you can send the watch to a special maintenance point to check the power.

3: The watch has been hit or impacted: the watch is very tight, if it is hit or hit, it may cause loose damage to the internal parts, and it may also cause the problem of running time. This is to be dealt with in a timely manner.

4: Need maintenance: The lack of oil in the movement or the wear and aging of the internal parts may cause the problem of running time, which needs to be maintained, and needs to be sent to the designated maintenance point for maintenance services.

5: In addition to the above common situations, some ambient temperatures affect the watch by magnetism: if the balance spring of the watch is magnetized, the watch will not be accurate.

Glashütte Watch Aftermarket Repair Center: 400-659-0877

1. The slower the watch, the more likely it is to be equivalent to an automatic mechanical watch, wear it normally for 8 hours a day, and the normal momentum can support the time, generally speaking, the watch can go normally for 36 hours, if you don't wear it often, the duration of the goods is not long, that is the reason for the lack of energy.

2. The watch may lead to dry oil, insufficient lubricating oil, difficult movement operation, no maintenance throughout the year, and the temperature is too low or too long.

Our mechanical watches often have the situation that the time is not accurate, and most people wonder if the mechanical watch is broken. There are many reasons why a mechanical watch can be parked, but there are several main reasons.

1. Insufficient kinetic energy: The watch is not winded enough, and the kinetic energy is insufficient. In particular, automatic watches require more arm movement, and the winding efficiency is very low. If you usually exercise a little bit, you can wind it manually, which can ensure enough kinetic energy.

2. Gear failure: Gear train failure such as deviation wheel and center wheel failure will lead to the condition of stealing stop of the watch. These situations are often not easy to detect and require disassembly, careful inspection and testing to find out the problem and solve the problem.

3. Lack of maintenance: mechanical watches should be maintained every 2-3 years or so. If it is not maintained for a long time, a large amount of oil sludge will be generated inside. Friction between gears increases, causing slippage.

Each watch has a different movement type, which leads to differences in the accuracy of each watch. The watch relies on the internal mechanism to control the uniform and accurate time of the watch, because the internal mechanism of the watch is affected by many external factors, such as gravity and ambient temperature differences, which will cause errors in the watch.

The Glashütte Warranty Error After-sales Service Center is located in Room 918, 9th Floor, Landmark Plaza, Nanjing East Road Pedestrian Street, Huangpu District, Shanghai, if you want to wear it every day, the best way to maintain it is to tighten the mainspring every two weeks to ensure that its gears run normally and smoothly. Gently rotate the crown until you can feel a slight urgency.

Mechanical failures such as magnetism, lack of maintenance, malfunction of the watch hairspring, escapement system, slippage of parts, etc., can cause the watch to be fast and slow. Mechanical watches are sometimes fast and sometimes slow, and it may be caused by severe impacts, water ingress, etc.

Reasons and solutions for inaccurate watch time:

1. Insufficient power reserve. You need to check whether the power is sufficient, if the amount of movement of the self-winding mechanical watch is very small, it may also cause insufficient power reserve, you can supplement the power by manual winding, and then observe whether there is a phenomenon of speed and slowness, if it is still recommended to go to the special repair shop for testing.

2. The power is insufficient. If the quartz watch suddenly finds that it is slowing, it is likely to be caused by insufficient battery energy, and send the watch to a special maintenance point to check the power or replace the battery.

3. Having been beaten or impacted. The watch is very tight, if it is hit or hit, it may cause loose damage to the internal parts, and it may also cause time problems, so it is recommended to go to a special repair shop for testing.

4. Maintenance is required. Lack of oil or wear and tear of internal parts of the movement may cause time problems, which need to be serviced and sent to a designated repair point for maintenance services.

5. Under the influence of ambient temperature, the watch is magnetized: if the hairspring of the watch is magnetized, the watch will not be accurate. The influence of the wearer's usage habits may cause an increase in the time error.

Sending the watch to a designated repair point for professional inspection and adjustment can restore the watch to the normal error range.

Note: 1. Mechanical watches vary according to the model and manufacturing quality of the movement, and the error of the general watch within 30 seconds per day is within the normal range. Some of the higher precision movements can reach around 10 seconds.

2. Generally speaking, the accuracy of quartz watches is high, and the Swiss standard is that the monthly error is within 15 seconds. Some precision movements can be within a few seconds per year.