iphone4s how to adjust the resolution 20

The resolution of the phone cannot be adjusted.

In the evaluation criteria for the display effect of the mobile phone screen, the resolution is an important indicator, which is a hardware parameter and cannot be modified.

iphone4s screen inches. Resolution: 960x640 pixels.

The display effect is adaptive to the screen parameters and does not need to be manually modified.

When it comes to resolution, when taking photos, you can choose different resolutions to get different image quality.

The high-resolution ** occupies more memory and has good image quality, while the low-resolution ** occupies less memory and has poor image quality.

If you need to modify it, you can change it in the camera section motor menu key.

In Settings - General - Accessibility - Zoom, turn off Zoom and you're good to go!

I can't adjust it, and the turnover rate of the mobile phone can't be adjusted, it's a fixed value.

The iPhone 4s has a 300,000-pixel front camera and an 8-megapixel rear camera. With LED fill light. Hope it helps!

The iPhone 4S is powered by an Apple A5 dual-core processor and has an inch IPS glass hard screen on the front with a resolution of 960 640 pixels, which has a screen pixel density of 326 ppi.

The iPhone 4S has a back-illuminated lens with 8 million pixels, a front-facing camera of 300,000 pixels, a 73% increase in light throughput, and a maximum aperture of 3264 2448 pixels.

The iPhone 4S has an 8-megapixel rear camera and a 300,000-pixel front camera.

iPhone 4S is a touchscreen smartphone launched by Apple, the fifth generation of iPhone. It was held on October 4, 2011 Beijing time in California, USA'At the new product launch conference of S Talk iPhone, this new generation of iPhone running iOS 5 system was announced.

The iPhone 4S has been greatly improved in terms of hardware and software, and its biggest highlight is the new Siri intelligent voice assistant and iCloud cloud service. In terms of hardware, it is equipped with an Apple A5 dual-core processor, and the front is equipped with an inch IPS glass hard screen with a resolution of 960 640 pixels, and the pixels of the back-illuminated lens have been increased to 8 million.

This question is a bit general, but let's explain everything about pixels.

Screen: Retina display, 960 x 640 pixels, 326 ppi resolution.

Front camera: 300,000 pixels.

Rear camera: 8 million pixels.

1. Select "Settings" on the mobile phone page and click on it, as shown in the following figure:

2. Click to enter the "General" option, as shown below

3. Click on the option of "Text Size", as shown below

4. After clicking in, you can adjust the font size according to your needs.

Method 1:

Go to the "Settings" option.

Select "Display & Brightness" and enter.

Select "Font Size" to enter and adjust to the appropriate font size.

Method 2: Enter the "Settings" option.

Go to the "General" option.

Select Accessibility

Select "Larger font" and adjust the font.

Note: If the adjusted font size of method 1 cannot meet the requirements, you can use method 2 to set a larger font.

Settings—General—Text Size Adoption

According to Apple's official data, the iPhone 4S comes with a one-inch IPS display with a resolution of 960 640 pixels. It also features an 8-megapixel back-illuminated lens and a 300,000-pixel front-facing camera.

The iPhone 4S is a smartphone released by Apple on October 4, 2011, which is powered by Apple's A5 dual-core processor and has an inch IPS glass hard screen on the front. It is a handheld device that combines a camera phone, a personal digital assistant, a **** device, and a wireless communication device.

Oh, yes! This is related, the thing that 800 shoots is 800, but what do you use to see it, if it can be seen on the computer, it is also related to the size of the fish**, and the quality of the shooting.

You underestimate 4s.

The resolution is 640*960, but the screen material is the best, and it is also 800W when it is displayed in 4s

1200w put on Nokia mobile phone and 4S comparison to know!

The computer is just for photographers to correct ** for beautification!

As long as it's not compressed, you can see his effectiveness!

inches, 1 inch = centimeter.

The aspect ratio is 3:2, and the rest is calculated by the Pythagorean theorem.

I found that the iPhone 4S pixels are not clear enough for the following reasons:

1.The screen was stolen and not original.

2.The lens was stolen and not original.

3.The equipment is original, either the lens is a problem or a screen problem.

Assuming that it is the first and second type, you can get the after-sales verification. If the test results show that the equipment has been artificially disassembled and cannot be warranted, the assumption is valid. At this time, it means that you have been deceived, and you should immediately take your mobile phone and invoice to the store for compensation.

Suppose it is the third one, get the after-sales warranty. The State Bank of Hong Kong is under insurance, non-man-made damage can be replaced free of charge, and the rest can be replaced with a new one.

See if it's scratched, you can zoom manually, just use your hand to point where you want him to be clear, and you'll be fine for a while, but if you can't, you can go to the specialty store and have a look, after all, this thing is an American thing, and most people don't get it.

Look at the back of the protective film to tear off, it's possible that he is covering the camera.

This is mainly due to the magnification function of the screen turned on.

To restore, you can set it up as follows:

1. Go to the settings on the desktop;

Second, enter the "general";

3. Go to "Accessibility";

4. Turn off "Zoom", if the switch is on, turn it off.

The top switch in the image below is the zoom switch.

Settings - General - Accessibility turns off large text.

1. The resolution of the iPhone4S camera cannot be set and modified manually, the front end is 130W and the rear end is 800W resolution.

2. However, when using the camera to take pictures, you can adjust the shooting through the function of zooming in or out**.

3. In the interface of taking pictures**, you can adjust the shooting distance by expanding or shrinking the screen with two fingers, so as to adjust the range of photography.

iPhone can't adjust camera resolution.

1. Select "Settings" on the mobile phone page and click on it, as shown in the following figure:

2. Click to enter the "General" option, as shown below

3. Click on the option of "Text Size", as shown below

4. After clicking in, you can adjust the font size according to your needs.

1. Enter Settings under the main interface of the phone.

2. Choose the universal tool.

3. Then select Accessibility.

4. You can find the font size setting option in the accessibility function.

Main screen size: inches.

Main screen resolution: 960x640 pixels.

Rear camera: 8 million pixels.

Front camera: 300,000 pixels.

Battery capacity: 1420mAh

Battery type: Non-removable battery.

Number of cores: Dual-core.

RAM: 512MB