Wireless router only WAN, 1 2 3 4 ports, when set up, that port is connected to the computer, which

WAN picks up the cat, LAN port connects to the computer at random, and then looks at the IP and password behind the wireless router. Set the IP of the same network segment as the router to the computer, and then enter the router settings. Such as:

Behind the router is then the IP of the computer is set to any number of 2 254), enter the corresponding account password on IE and enter the corresponding settings. Write your Internet ID and password in the WAN section. Open DHCP are all Chinese and you can study it slowly.

The WAN interface can be connected to a network cable or a cat, and 1 2 3 4 can be connected to a computer.

Which port is the cat connected to the wan. You can connect to any wireless router. Just open the web page settings. Hope.

The 4 LAN ports of the cat can be connected to 4 computers, and devices with wireless network cards can also be connected wirelessly.

WAN is the external port to the router. LAN is a branch port, that is, 1234, just plug in any one.

God: The one near the power connector is connected to the cat! The back is to connect to the computer!

Connect that one socket of a different color, that's a WAN, and the rest is the LAN used to connect to the computer.

Wan's mouth is connected to the cat, 1 2 3 4 any one is connected to the computer.

wan connects the cat, 1234 connects to the computer casually.

Connect to the computer with multiple interfaces of the same color A single color connects to the cat.

You should go to the customer service of the communication company for help.

The WAN port on the router is used to connect to the external network (public network), or to connect the equipment of the broadband operator. For example, when the WAN port is connected to the Moden. When the optical brazing is connected to the Internet, the WAN port is used to connect to the optical modem.

When the network cable enters the home to access the Internet, the WAN port is used to connect to the home network cable.

The LAN port on the router is used to connect the devices in the intranet (LAN), mainly to connect computers, switches, printers and other devices. Do not connect the modem, optical modem, or home network cable, otherwise the router will not be able to access the Internet.

Yes, it is normally used in this way, and it is a standard connection.

There is no such situation, any router has a WAN port, and only two ports may be a broadband modem.

A router, also known as a gateway, is used to connect multiple logically separated networks, and the so-called logical network represents a single network or a subnet. When data is transferred from one subnet to another, it can be done through the router's routing function.

Therefore, the router has the function of judging the network address and selecting the IP path, it can establish a flexible connection in the multi-network interconnection environment, can connect various subnets with completely different data packets and media access methods, the router only accepts the information of the origin server or other routers, and belongs to a kind of interconnection device at the network layer.

Impossible, standard routers have WAN port and LAN port, some mini routers only have one network port, and then WAN port and LAN port are universal, if there is only LAN port and no WAN port, it can only be a switch and not a router.

Let's take a picture, no WAN should be a cat, not a router.

Your network layout is rather confusing, and I suggest you take three steps:

1. External network export part.

The line that your network accesses is connected to the WAN port of the device you use to dial up, whether it's a router or a cat.

2. Intranet connection part.

The router and the modem are connected using the LAN port.

3. Other intranet parts.

Direct cable connection to LAN port.

Finally, if you're only using dial-ups, both the cat and the router can do the job, so you can choose one or the other.

If your cat is used for dialing (telecom optical modem can not turn on wifi temporarily), and the router is a wireless router, you can first set the IP address of the wireless router to pay attention to the network segment, it may be, you only need to realize its wireless switch function. The other LAN ports are connected.

If you want to build a wireless LAN. Then it should be like this:

1. Telecom optical fiber access to your optical modem WAN port.

2. The LAN port of your optical modem is connected to the LAN port of the wireless router. (Be sure to change the IP address).

3. Other LAN ports.

It is recommended that you express the question in the future, and you need to explain the model and function of your device as much as possible, so as not to make many people unable to answer.

You're definitely dialing from a computer. The correct connection is that the cat is connected to the WAN port of the wireless router, and then the WAN port is set to the router.

PPPoE dial-in and enter the account number and password. The computer is connected to the LAN port of the router and set to automatically obtain the IP, and you can surf the Internet.

Your way is still to use the computer for dial-up, and the router just acts as a switch. So it's not the right connection.

F460 is ZTE's Class A PON terminal, which has 4 LAN interfaces, namely LAN 1, ITV, LAN 3, and LAN 4You can connect to lan1, lan3, lan4.

Fiber doesn't need dial-up, right? How can there still be cats? Is it fiber-to-the-home exclusive fiber?

Ordinary cats have an opening that can be plugged into a network cable.

ADSL dial-up **Line-modem-routerwan-routelan-to-switch or computer.

WLAN is a wireless local area network, not an interface.

WLAN and WAN are the same port, but the manufacturer logo is different.

The reason why the cat is connected to the WAN port of the router and cannot access the Internet: The routing modem needs to be set up to access the Internet.

How to set it up: Steps.

First, the connection method.

Routing modem --- router WAN port; The LAN port of the router --- a computer.

Steps. Second, the setting method.

Before setting, please disconnect the WAN port network cable of this router and plug it in after the setting is complete.

1. Set the IP range of the router.

In order to avoid conflicts, you can change the IP of the router to other IP segments in order to avoid conflicts (routing the LAN port of the cat). For example, it is modified to:

After restarting the router, the address to enter the router is.

2. Set up the router Internet access method.

View the IP details of the computers connected to the routing modem. (win+r--input, cmd--input:ipconfig all [remember: ip, mask, gateway, dns]).

Set it on the router, and select [Static IP] in the [Setup Wizard]. Enter the same as the IP address of the routing modem, the others: mask, gateway, and DNS settings.

Restart the router after the setup is complete.

Please, if you use a router, the dial-up work is done by the router, connect the cat to the WAN port of the router, and then set up your router, other computers are connected to the LAN port of the router, you can access the Internet without dialing, the setting of the router, read the manual, or find someone who understands you to help you debug!

You don't have a shared use of the route. Correct connection method: The network cable is connected from the port of the modem to the WAN port of the router. Then tap from ports 1 2 3 4 to the computer for network sharing. After the network cable is connected, it takes some work to get online. As follows:

Go to the router menu and set up your Internet account and Internet password, and you can surf the Internet after setting it.

If the computer is connected to the Internet through the route, you don't need to dial up the connection anymore, and you can directly access the Internet. Remember to set up your IP. If you don't know how to set it up, just get it yourself. Good luck.

You have to set up a dial-up through the router.,How can you go online without dialing.。

There is a problem with the setting of the router Follow the instructions to set it up again It is estimated that there is a problem with the IP settings of the computer where you can't access the Internet.

Friends who understand the difference between WAN port and LAN port know that WAN is written by the initials of Wide Area Network in English, which stands for Wide Area Network; LAN is written as for Local Area Network, which is called Local Area Network. Then you may wish to give the WAN port and LAN port on the router a Chinese name, which are the WAN port and the local network port. From their names, it is not difficult to see that WAN ports are mainly used to connect external networks, such as ADSL, DDN, Ethernet and other access lines; The LAN port is used to connect to the home internal network, and is mainly connected to switches, hubs, or PCs in the home network.

1. The difference between the WAN port and the LAN port on the broadband router.

WAN is written by the first letter of the English Wide Area Network, which stands for Wide Area Network; LAN is written as for Local Area Network, which is called Local Area Network. From their names, it is not difficult to see that WAN ports are mainly used to connect external networks, such as ADSL, DDN, Ethernet and other access lines; The LAN port is used to connect to the home internal network, and is mainly connected to switches, hubs, or PCs in the home network. It can be said that these two types of network ports are one external and the other internal.

2. How to connect the network cable between the WAN port and the LAN port on the broadband router.

First, plug the access network cable provided by the network operator on the WAN port, then connect several computers that share the Internet to the LAN port, and then use one computer to log in to the management interface of the router and configure the corresponding configuration to complete the Internet sharing.

3. The transmission process of network data in the WAN port and LAN port.

When a machine in a home network sends a packet to an external network, it first sends a request to the default gateway, which is also sent to the broadband router. When the router analyzes the private IP address in that packet, it checks the NAT address translation table of the device itself. After finding the corresponding entry, the WAN port IP address is used to communicate with the external network.

After receiving the packet, the external network resolves the IP address of the WAN port of the router in the packet, responds to the address, and sends the response packet to the router. Then the router performs NAT address translation again, converts the IP address of the WAN port into the private IP address of the request, and finally completes the whole process of sending and receiving data packets.

WAN is the meaning of WAN, which is used to connect broadband network cables, and LAN is the meaning of LAN, which is a small LAN of several (four) computers, which is used to connect computers.

WAN is connected to the cat (some optical fibers do not need to be connected to the cat, directly connected to the broadband port), and LAN is connected to the computer or delivered to the machine.

The WAN port is connected to the home broadband modem (or with the switch) with a network cable, and the LAN port uses a network cable to connect the computer to the router. WAN is written by the first letter of the English Wide Area Network, which stands for Wide Area Network; LAN is written as for Local Area Network, which is called Local Area Network. Give the WAN port and LAN port on the router a Chinese name, which are the WAN port and the local network port, respectively.

From their names, it is not difficult to see that the WAN port is mainly used to connect to the external network, while the LAN port is used to connect to the internal network of the home, mainly connected to the switch, hub or PC in the home network.

To put it simply, WAN is the uplink port, which is used for you to connect to the access device, and LAN is the downlink port, which is used for you to plug in the computer.