How to install the toilet bowl with rear drainage, and how to install the toilet drain pipe after th

Treat the ground drain as high as the ground, and then press the center of the outlet to draw a cross extension.

Draw a crosshair along the toilet outlet to the position where the edge of the toilet can be seen, 3 put the horse to the drain, and the crosshairs overlap.

Draw a line along the outside of the toilet bowl and remove the toilet.

Place the toilet sealing flange on the drain on the floor and make a circle of glass glue along the inside of the overall circle line of the toilet bowl.

Place the toilet on top of the crosshair, press the bottom edge of the toilet on the glass glue, connect the water hose, and install a corner valve at the water outlet on the wall to turn off the water for maintenance.

Do not use and keep the ground dry for 24 hours.

When we are decorating, we must want to plan everything in advance in the early stage, so as to provide better conditions for future occupancy, especially for the basement decoration partners, plan the drainage system in advance to pay special attention, so let's talk about how to solve this problem if the bathroom has no sewer pipes?

There are generally two situations when the bathroom does not have a sewer pipe:

One is that the bathroom is in the basement, the drainage is lower than the municipal pipe network, so there will be no sewer pipes, and the drainage needs to be solved by ourselves.

The other is to add or change the location of the toilet in the area of the large flat floor, at this time, because the location of the increase and change is not in the original drainage point, it will lead to drainage problems, either to change the drainage pipe of the whole house (the amount of work is very large, almost equivalent to renovation), or to use the sewage lifter to solve the problem of sewage transmission.

So in the bathroom scene, what kind of sewage lifter is suitable for installation?

First of all, determine whether only the bathroom area needs to be drained, if you can choose a small toilet sewage lifter to solve the drainage problem, if there are other rooms that need to drain at the same time, we may need a larger sewage lifter.

Secondly, the small sewage lifter must be selected with a grinding and cutting system, because the general small machine overflow diameter is smaller (generally about 10mm), which can crush the larger debris in the water, will not cause the blockage of the pipeline, and if it is a larger sewage lifter, the cutting function is not necessarily necessary, because the general overflow diameter of the large machine will be much larger (50mm), and the larger magazine can also pass directly and smoothly, which will not cause the occurrence of blockage problems.

Finally, it is more suitable to choose the pneumatic control method for the sewage lifter in the bathroom, because if the float control is chosen, it is easy to cause failure due to the entanglement of fibrous debris.

We spent more time on the early selection, so that it could be more comfortable when we checked in later.

Summary. Hello <>

Kiss! <>

Rear drain toilet installation diagram +** is as follows:

Rear drain toilet installation diagram +**.

Hello <>

Kiss! <>

Rear drain toilet installation diagram +** is as follows:

The side toilet is a toilet with the outlet on the side, because the drain can be seen from the appearance, so many people don't like this style of toilet, but for people with small households, the side toilet is still a good choice. So how to install a side toilet?

1. The drain port needs to be placed flat by the installer. The bottom outlet of the toilet bowl should be equipped with a special flange for the toilet bowl or coated with glass glue, which should be evenly aligned with the drain. The bottom of the toilet and the surrounding area should be glued, and the gap between the toilet and the wall should be evenly placed. Straight and steady.

2. After the toilet is in place, there is no water leakage, the water level is correct, the flushing is smooth, the switch is flexible, and the cover plate is stable;

3. The toilet is generally not equipped with anchor screws. If you need to install anchor screws, first apply the film evenly with toilet sealant, draw the position of the expansion bolts on the left and right sides of the toilet, and drill holes to bury the expansion bolts. Be careful not to damage them. Waterproofing layer.

4. Install or debug the water tank fittings, first check the water pipe, drain the water for 3-5 minutes to flush the pipe, then install the angle valve and connect the hose, then connect the hose to the water tank fittings to connect the water valve and connect the water source, and check the water inlet valve. Check whether the water inlet and sealing are normal, and check whether the installation position of the drain valve is flexible.

1. When installing the side toilet, the distance from the center of the sewage outlet to the ground should be measured first, that is, the pit distance of the wall row. Be sure to consider the thickness of the tiles when measuring.

2. Before buying this kind of wall-row toilet, you must know whether the drainage method of your residential area is side-row, if not, you can't install this kind of toilet.

3. Because the water tank of the wall-type toilet is hidden in the wall, the material of the water tank, the water parts inside the water tank and the process of the water tank are relatively high. If it's poor, a series of problems will arise. Toilets are more troublesome in terms of maintenance.

1. Low noise: Since the water tank of the wall-mounted toilet is installed in the wall and has a wall barrier, the sound is naturally much smaller when flushing.

2. The toilet is easy to move: the wall toilet is much more convenient than the ordinary toilet, and it does not affect the spatial layout of the bathroom.

3. Small footprint: The wall-hung wall-hung toilet adopts the wall-mounted installation method, which occupies a small area and has a more open space.

4. Easy to clean: The wall-hung toilet is easy to clean, and there is no sanitary dead end, which is very in line with your cleaning personality.

1. When choosing the material of the drainage pipe, it is best to choose PVC pipe, which is both environmentally friendly and durable. The high-rise drainage pipe should belong to the double-walled space, and when installing, the hot and cold water pipes should be separated, not in the same groove, and the distance should not be too close.

2. The hot and cold water pipes in the bathroom should be kept at a level, and installed in the order of left hot and right cold. In addition, when paving into the groove, it is necessary to achieve horizontal and vertical verticality, and the slope and position must be standardized and reasonable. It is recommended to go to the top and not to go low, which is also convenient for later maintenance.

3. If the drainage pipe is to be equipped with toiletries, the inspection port should be increased, and the length of the pipe should be more than 4 meters, and the expansion joint should also be added. If the sanitary ware itself does not have a trap, it is necessary to install an S-shaped or P-shaped trap on the water pipe to prevent the odor in the pipe from overflowing.

4. When carrying out the layout of the pipeline, it must be considered comprehensively according to the layout of the house and the living habits of the owner, which is not only convenient to use, but also very beautiful and good-looking.

The toilet is an indispensable sanitary facility in every household, and it carries the function of our daily excretion. However, without proper installation and maintenance, it can lead to numerous problems. Next, I will introduce you to the installation method of toilets and sewers.

1.Toilet installation.

1) Measurement: Before installing the toilet, the installation position should be measured first to ensure that it can be properly matched with the position of the water tank and the distance from the wall.

2) Mounting screws: When installing washers and positioning studs, extra care should be taken to ensure that they are securely fastened.

3) Place the toilet: Place the toilet into the mounting hole, press and check the stability.

4) Install the sofa cushion: Apply a small amount of silicone to the sofa cushion and press it firmly to the bottom of the toilet bowl, making sure it is well sealed.

5) Fix the toilet: Insert the nut into the positioning stud, and then use a wrench or wrench to secure the car jacket, and be careful not to use excessive force.

2.Sewer installation.

1) Preparation: First, use a flashlight to check the drain and make sure it is clean and unobstructed. Then, check the connections in the sewer to make sure there are no holes.

2) Set up a noise decelerant: Installing a noise decelerator can reduce the disturbance of noise when the Yansheng pipeline is working, so that the surrounding residents will not be disturbed.

3) Install spring clamps: Before installing sewers, spring clamps need to be used to ensure that the pipe connection is tight and not loose.

4) Connect the sewer pipe: Insert the sewer pipe into the center of the pipe connection and fix the livery with a wrench or wrench, at the same time, be careful not to cross the details of the connection.

5) Testing: After the installation is completed, the flow and discharge of the sewer need to be tested. And make sure that the water does not flow to other locations, providing reliable service.

In conclusion, when installing toilets and sewers, it is necessary to carefully read the installation manual and follow the instructions for proper installation. In addition, during use, frequent maintenance can help extend their lifespan.