When I buy a new computer, why do I sometimes pause when I double click the hard disk?

Normally, the system disk is in any disk format, the key is to look at the personal use needs, if the security requirements are higher, you can use NTFSIf you usually use it, you can choose fat32, and the ghost version of the operating system can only be installed on the fat32 system, and the NTFS system may be wrong. It is also normal that there is a difference in capacity, and the calculation is different.

There is also system file space taken up.

1. Double-click pause may be in the U disk virus, you right-click the drive letter to see if there is the word auto, if there is, go to the sky software station** a U disk virus to kill the virus.

2. As for the situation that the hard disk capacity display is less than the actual one, it is related to the operating system, and the hard disk capacity display is different under the PQ or DOS operating system, so there is no need to worry about the size of the capacity.

3. It is best to use NTFS format for the system disk, which has high security and better stability. If you want to convert the format, you can use PQ to partition it.

One, each drive letter has a pause, it is estimated that there is a virus in your computer, see if there is a hidden file and ***exe (* stands for English letters or numbers) generally the computer that has been hit by this virus is unable to view the hidden files, you can use the U disk on your machine to copy a few files to the machine without poisoning to see if there is, be careful not to infect other people's machines. Either the transfer mode of the hard drive is wrong, you can take a look in the device manager. Second, it is best to use FAT32 for the system disk, because the DOS system does not use the NTFS format, even if the modified DOS system can recognize NTFS, there will be unknown errors.

For other disks with NTFS, leave a FAT32 for easy recovery of the system.

The new boot opens the drive letter to load the contents of the panel, so you want to get stuck, the second time it's fine, it's best to use fat32 to install the system, and it is recommended to use fat32 for other panels, which is convenient to identify later, choose manual when installing the system, step by step according to the prompts to choose don't be afraid of making mistakes, all go in and see, it is helpful to yourself, I believe you will find a way to change the format.

Poisoned, it is recommended to reload the lattice or only reload.

I think there's a virus, and I've encountered it, but I've been using it all the time.

If you're really unhappy, you can reload.

Whether the driver is fully installed or not, sometimes it is related to the motherboard driver.

Change the transfer mode of the hard disk to DMA mode.

Your computer's virtual memory is low, I promise. You change it!

Double-click the hard disk to pause, in fact, it is a problem with the CPU computing speed. Double-click to open the hard drive It takes the CPU to scan and retrieve all the files in the partition in an instant, and if there are too many files, the CPU is overwhelmed, and it will pause. This retrieval index is not necessarily worse for single-core than dual-core.

That's why you're in this situation. That is, at least this ability of a single core is stronger than that of a dual core.

You look at your disk fragmentation that.

Another is the optimization problem, right-click on my computer--- properties--- advanced --- performance settings --- adjust to the best performance (on the desktop for icon labels use shades to tick) others can be left unchecked.

This situation is what most people will encounter, when the system just boots into the desktop, double-click "My Computer", but find that you can't see the hard disk letter, only to see a flashlight scanning a folder, and the lower left corner also shows "Find Items"...It took about 10 seconds or so to see the drive letter.,But when you start the system, you don't have this situation when you enter through a shortcut to a folder on the desktop.,Entered.,Some people attribute this reason to too many folders.,Installed anti-virus software, etc.,I don't care about these.,Because I just bought a laptop a week ago, this situation also appeared.,Or dual-core 1G memory,It's really unsatisfactory to enter a system disk.,So I finally found a solution after searching the Internet for a long time. 1. Run -regedit (run registry).

2. Go to the registry, delete all the entries and keys under the hkey local machine software Microsoft Windows CurrentVersion Explorer Mycomputer, restart the computer, OK!

If you are using an XP system, it is possible that your hardware is in conflict with the system and cannot give full play to the maximum effect of your hardware.

Individual reasons, do you see that your hard drive is opened in DMA mode?

This can be the case if it is not opened.

Normal, because it hasn't started up yet.

I really can't see this**The configuration is high.。。。

Completely install the system.

Try again after system optimization.

Tools - > Folder Options - > General - > open each folder in the same window.

Hello, I'm experiencing such a problem, but I've been fumbling for a long time, installing the system twice, and finally figuring it out! Glad!!

The reason is: the "Internet Explorer0" in your C drive is damaged or lost, that is, the system comes with the Internet Explorer installation directory.

Workaround: You restore all the contents of the Internet Explorer folder and you're good to go.

I extracted my win7 x64-bit system with IE browser installation directory for you,You copy the past,Refresh it,That is, success!

Open a tool above the inventory, folder options, and select "Open each folder in the same window" in "General" to try.

Explorer settings, folder options.

1. If the machine configuration is low and it has just been turned on, this situation is relatively normal, and it can be turned on normally after 2 minutes. Second, if it keeps going like this, it may be the cause of the system, and it is recommended to redo the system and update the response driver. 3. You can use tools such as hdtune to detect whether the hard disk has bad blocks, etc.

Your computer configuration is very low, the computer has not fully booted, and the startup items have not been loaded, you can optimize the boot start project, useless shutdown, so it's OK, or boot up and wait for 1 minute to open it.

You use the hard disk test software HD test benchmark and slow scan the bad sectors to see, I basically judge that your hard disk has a problem that causes the disk to be difficult or slow.

The hard disk indicator keeps flashing, indicating that the hard disk is reading or writing data at this time.

This is normal.

Whether the hard disk flashes or not has nothing to do with the CPU being full and dissatisfied. The hard disk flashes consistently, indicating that the hard disk is exchanging data, and the frequency of exchanging data will naturally be higher when you operate, so it flashes fast, and flashes slowly when not in use, which is the reason.

That's to see the working status of the hard disk.,Don't flash means that the work burden is small.,Flashing means busy work.,The light is on and doesn't flash.,It means that the work is at the limit.,Generally your computer will fake death at this time.,If it's not serious, it will be fine later.,If it's serious, it's stuck here.,To restart physically.。

The hard disk is reading and writing data. As long as the system is not very slow, there is no problem.

If the computer is fine, leave him alone.

Sometimes, viruses can access the hard drive non-stop.