How to clean between the tiles and crevices in the kitchen?

Here are a few things you might find helpful.

Two methods; 1. Dip a cloth in salt, wipe 2 times a day, wipe for 2 to 3 days, and then wipe with a damp cloth several times to make it as white as ever. 2. The oil stains on the kitchen tiles, the rag often can't be wiped off, and the soapy water can't be cleaned, at this time, you can use a handful of chicken feathers dipped in warm water to wipe it, and it will be clean with a wipe, and the effect is very good. Give it a try.

Vinegar or plant ash for cleaning the ground There are many grease stains on the ground, such as pouring a little vinegar on the mop to remove the grease on the ground. It is difficult to remove the oil stain on the cement floor, if you can get some hay and wood ash the night before, mix it into a paste with water, and then spread it evenly on the ground, and then rinse it repeatedly with clean water, the cement floor can look new. It is also easy to remove oil stains by using burned honeycomb coal ash mixed with laundry detergent to scrub the floor.

Rice soup for cleaning gas stoves, gas stoves, and liquefied gas stoves are easy to get oil stains. If it is washed with alkaline water, it is easy to wash off the paint; If you wash it with water, it can't be cleaned. You may wish to apply sticky rice soup to the stove, and after drying, the rice soup will scab and stick the oil together, so that you only need to scrape it with an iron sheet, and the oil will be removed along with the rice soup scab.

In addition, it is also good to wash it directly with thinner rice soup and noodle soup, or to scrub it with mullet bones. It is difficult to wipe the oil stain on the glass with newspapers and rags, you can wipe it with alkaline decontamination powder, and then apply sodium hydroxide or dilute ammonia solution to the glass, and then wipe it with a cloth after half an hour, and the glass will become smooth and bright.

Cleaning screen with dish soap The screen of the kitchen window is difficult to clean after being grudged with oil. One way is to sweep away the dust on the surface with a broom, then add 500 ml of water with 15 grams of dish soap, stir evenly and wipe on both sides with a rag to remove the oil. The second is to add a small amount of milk to the laundry detergent solution, and the washed out screen will be the same as new.

It is both economical and hygienic "small comb" to remove oil quickly.

Method: Add a little comb and water.

Buy caustic soda steel wool balls and wipe them with boiling water. If it is really difficult to clean, clean it with sulfuric acid.

Very simply, one of the shield king tile cleaners is specially designed to clean the gaps in the tiles - the shield king descaler.

1. Leak reed candle cleaning method.

Candles are mainly used to clean stains on the floor and walls in the kitchen. Because the crevices of the tiles in the kitchen often build, you can use candles to clean them. The cleanup method is:

Prepare the candle first, then apply it vertically to each crevice, and then apply it horizontally. Because the candle is very smooth, the oil will disappear after wiping.

2. Remove grease from rice soup and noodle soup.

In general, we can use the unfinished noodle soup or rice water at home to remove the oil in the kitchen. However, the noodle soup must be used while it is hot, and generally only need to pour the noodle soup directly into the oil stain and brush it with a brush.

3. Toothpaste to remove grease.

We all know that the decontamination ability of the ointment is also very good. For example, most of the owner's range hood will be cleaned directly with toothpaste, because the ointment has a strong decontamination ability, so it can absorb stubborn stains.

4. Remove oil stains from white sugar.

Sugar is a vital condiment in the kitchen. However, white sugar can not only be used as a seasoning first product, but also can remove oil stains. Here's how:

Start by taking some sugar and apply it to an oily area. In this way, the sugar will react with the oil, and finally you just need to wipe it with a clean rag.

1. The kitchen and bathroom are places with a lot of water, and if there is a problem with the grout agent of wall tiles and floor tiles, it is necessary to re-hook the joints in time to avoid leakage.

Second, the construction of caulk:

1. Surface treatment.

Clean the tile crevices before using tile grout to remove all dust, oil and other contaminants. At the same time, it is also necessary to remove loose tile adhesive between the gaps in the tiles.

2. Stir. Mechanical mixing is carried out using a low-speed electric drill with suitable mixing blades. Add the powder to an appropriate amount of water and start stirring until the rent is uniform and lumpy. The mixture is allowed to stand for 5minStir slightly and use.

3. Construction. Use a rubber grouting knife or a suitable scraper. Fill the stirred tile grout into the tile gap and fill the tile grout diagonally or in a circular motion.

Try not to leave too much grout on the tile surface, and clean the tile surface regularly with a damp sponge or damp cloth before the material sets. Remove any imperfections found as soon as possible and repair them as soon as possible.

4. Cleaning. Clean the tile surface with a slightly damp sponge, rubbed topically with a clean, damp cloth, and before the caulk film dries. The tool should be rinsed with clean water immediately after use.

After the tile grout is cured at the initial dry, wipe off the tiled tile grout with a dry cloth or use water for final cleaning.

Kitchen wall tiles are a common material for kitchen decoration, which is not only beautiful and durable, but also easy to clean, which can effectively keep the kitchen clean and tidy. However, the crevices of the tiles are easy to accumulate dirt, which brings inconvenience to cleaning, and long-term wetting can easily cause the tiles to fall. So, how do we deal with tile joints?

1. Clean first.

The first thing that needs to be done before you start dealing with tile joints is to clean the tile surface thoroughly. Because if the dirt on the surface is not cleaned up, it is easy to make it difficult to complete the repair work due to dust and stains stuck to the crevices. It is recommended to clean with a professional tile cleaner.

2. Use caulk.

Caulk is the material of choice for dealing with tile gaps because of its ability to easily fill gaps and make them smoother. Slowly squeeze the caulk into the gap until the gap is full, using a trowel to smooth out the caulk and bring it flush with the tile surface. Caulk is available in a variety of colors, and you can choose a color that matches the tile for a better blend.

Before the caulk dries, the surface needs to be wiped with a damp cloth to allow the caulk to fill more completely.

3. Paste the corner sticker.

If your kitchen wall is adjacent to the corner of the kitchen, consider sticking corner stickers in the gaps. Corner stickers can reduce the area of the gap while also protecting the corners of the tile from scratches. Use a professional tile glue to stick the corner stickers to the corners, and then use a trowel to remove the tile glue leakage in the gaps in the corners.

With the use of corner stickers, the area of tile gaps will be greatly reduced.

In conclusion, dealing with the gaps in the tiles of the kitchen wall is a simple job, but it is very important. The correct treatment can make the tile surface flatter and more beautiful, and at the same time, it can effectively reduce the risk of dirt accumulation and tile falling.

You need to prepare: watering can, water, shampoo, toothpaste, toothbrush, the specific steps are as follows:

1. First take out a watering can and set aside.

2. Then pour water into the watering can.

3. Add an appropriate amount of shampoo.

4. Add an appropriate amount of toothpaste.

5. Then close the lid of the watering can and shake it evenly.

6. Spray the watering can liquid on the tile joints in the bathroom.

7. Then use a toothbrush to brush the stains inside the tile joints.

8. Finally, the stains in the bathroom tile joints are cleaned.

Pick a cleaner

Tiles, especially floor tiles, can accumulate dust and become dirty during prolonged use. Depending on the fading of the original sewing agent, you will need to use different cleaning methods. For tile crevices with a light degree of fading, a simple paste mixture of baking soda and hydrogen peroxide can be used.

For severely faded crevices, oxygenated bleach is used.

Perform a preliminary cleaning

In order to avoid repeated cleaning processes during scrubbing, it is recommended to perform a gentle cleaning before deep cleaning. Dilute an appropriate amount of bleach to kill mold in the cracks of the tiles, and brush off the tiles and the surface of the gaps. Dust Egyptian dirt.

Apply detergent

Start with a spot (e.g. clean only one square meter at a time) and apply detergent to the gaps in the tiles. Let sit for 3-5 minutes, this will make cleaning easier.

Scrub the crevices

Use a brand new toothbrush (an electric toothbrush is better) to brush out the dirt hidden in the crevices. Although the scrubbing process takes a lot of time, don't give up easily. Wipe off any remaining detergent with a cloth and water. Reapply detergent as needed.

Continue scrubbing

Follow the above method to gradually clean the gaps of each tile. Apply detergent, let it sit and scrub until every tile crevice is as clean as new.

Cleaning is complete

While you're still basking in the joy of a brand new tile crevice, don't forget to give the tiles a final wash to wash off any remaining detergent. It is recommended to apply an oil-based sealant to the tile crevices once a year to protect the tile crevices from fading.