Make a wardrobe on site, what board is the most environmentally friendly

Millennium Boat adopts healthy and environmentally friendly MDI ecological glue, the formaldehyde emission of the board is far lower than the national standard, and at the same time integrates high-quality wood resources at home and abroad, establishes a raw material base, fully relies on the advantages of base and batch raw materials, and is in line with international standards. Millennium boat boards are widely used in wood structure houses, decoration, furniture, wooden doors, flooring, packaging, automobiles and other fields.

MDF: It is made of wood fiber or other plant fiber as raw material, grinding into fine fiber after cooking, adding an appropriate amount of adhesive, and pressing it under a certain temperature and pressure. High density and high strength. At present, MDF has become the main material of most wardrobe manufacturers.

Particle board: that is, the common saying "particleboard", the wood is processed into fine particle shavings and added with an appropriate amount of glue, pressed at a certain temperature and pressure. The density is not high, and the strength is small.

Melamine board: Melamine-impregnated paper is pressed directly onto particleboard and high-density board. The board is available in two grades, E1 and E2.

The full name of melamine board is melamine impregnated adhesive film paper veneer wood-based panel. It is made by soaking paper with different colors or textures in melamine resin adhesive, then drying to a certain degree of curing, laying it on the surface of particleboard, MDF or hardboard, and hot pressing.

Among the many boards, multi-layer boards and particle boards, laminated materials, and ecological boards are used more, and which one is more suitable for wardrobes is selected according to actual needs.

Multi-layer board: through the vertical and horizontal arrangement of several layers of thin plates as the base material, the veneer is glued and pressed together, with strong structural stability, high strength, and not easy to deform when damp, in addition to making wardrobe boards, it is also suitable for making bathroom cabinets. The cabinet can be adjusted according to the needs of the layer to achieve the control thickness.

Particle board: It is a kind of cabinet board widely used by many furniture custom manufacturers. Its composition is made of wood fiber granules, which makes the whole board have good dimensional stability, rarely warp and deform, and the overall mechanical properties are close to woodworking boards and multi-layer boards.

Laminated timber: The structure is similar to that of woodworking boards, but the internal wood strips are tenoned in a zigzag manner similar to fingers, and non-toxic white latex is used, and the environmental performance is close to that of solid wood boards. The processing of finger joints does not have high requirements for equipment, and it is very convenient for on-site production of cabinets.

Ecological board: It has the functions of heat resistance, moisture resistance, fire prevention, etc., and there is no need to brush waterproof and anti-corrosion. Moreover, the eco-board does not need to be painted, and the furniture or wardrobe and other devices can be used immediately after the equipment is made, which saves the time of painting and the cost of painting.

Answer: Hello, you can consider the following: 1. Solid wood particle board, also known as particle board, mainly uses some leftovers from natural wood processing, and then is pressed at a certain high temperature after drying and mixing with various adhesives. Due to the gradual improvement of the process level, the solid wood particle board on the market can reach the E0 level, which means that the formaldehyde emission is very low.

In addition, particle board has strong stability and low expansion rate, making it one of the most popular boards for making cabinets on the market. 2. MDF MDF, also known as fiberboard, is a board made of wood fiber or other plant fibers as raw materials and then applied adhesive. Not only the surface flatness is good, easy to mill, good stability, strong nail holding force, its environmental performance is the same as that of solid wood particle board.

But there are also disadvantages, it is less resistant to water immersion. Therefore, cabinets made of MDF are more suitable for dry environments. 3. Solid wood multi-layer board is made of a variety of wood segments cut into veneer or thin wood, and then bonded with protein glue, and made by several processes such as cold pressing, hot pressing, sanding, etc., which has the characteristics of high strength, good flatness, not easy to deform, and adjustable indoor temperature and humidity.

Of course, its environmental performance is also excellent, solid wood particle board and MDF, and the waterproof performance is outstanding, which is good for making cabinets. 4. Finger joint board The board is spliced by a number of wooden boards, because the vertical wooden board will use a zigzag interface, so it is called a finger joint board, which is somewhat similar to the appearance of two hands crossed by people. So why is it suitable for making cabinets?

Because white latex is used in the production of this sheet, you can rest assured that it is environmentally friendly. 5. In addition to fir boards, there are also fir boards that can also be used to make cabinets. It is made of high-quality fir wood, and then made by complex processes such as high temperature, degreasing, drying, and paneling, so that it has the advantages of being smooth and smooth, durable, and not easy to deform, and it will also exude a light fragrance.

Because the outermost layer is melamine paper, it is not only beautiful, but also environmentally friendly, and more importantly, it is economical and affordable.

Question: Is it better to love the core board or the aldehyde board of Hollywood?

First of all, we must understand a concept, the environmental protection of the board has little to do with the category, but the environmental protection level of different boards.

According to the latest national environmental protection standards, the plates that meet the following three environmental protection grades are environmentally friendly and can be used for interior decoration are E1 level, E0 level, and ENF level

Level E1 Level E0

ENF level

Therefore, as long as it is in line with the scope of the national standard, the above three types of boards are currently the most environmentally friendly and can be used for interior decoration, such as the board of the wardrobe now, we can choose the ecological board, solid wood board, multi-layer board, No. 1 log board, etc., which is also a more popular home improvement board, and the performance is superior in all aspects.

The use of solid wood fir board is a more environmentally friendly material, because this kind of board uses less glue, so the formaldehyde content is less, and the high-density board uses a very large amount of glue, containing more formaldehyde components, it is recommended to use solid wood board.

Answer 1: High-density board is a commonly used wood-based panel, which is made by soaking wood and branches in water, and then crushing and pressing them. Its density is uniform, the strength is high, and it is relatively easy to process, but the disadvantage is that the moisture resistance is not good. 2. Particleboard is a kind of man-made board that cuts wood and other raw materials into pieces of a certain specification, dries, mixes adhesives, hardeners, and waterproofing agents, and presses them at a certain temperature.

Particleboard has a uniform structure and good processing performance, and can be processed into large-format boards as needed, which is a good material for making furniture of different specifications and styles. 3. Plywood, commonly known as multi-layer board, is a plate-like material formed by turning wood into a veneer or thin board that is glued together with glue at a certain temperature and pressure for a certain period of time. The common ones are three, five, nine, and twelve.

Plywood has common defects such as low glue strength, bubbling and partial glue, and plywood warping, so it is more used to make oil-mixed panels or backboards. 4. The solid wood board is made of natural trees, which is extremely environmentally friendly. Compared with other materials, it is harder and more stable.

It also feels good in the hand and can also adjust the temperature and humidity in the room. However, it is relatively much higher, and the production and construction process requirements are higher. 5. Large core board, also known as blockboard, is a good material for making wardrobe frames.

The large core board is made of a layer of core spliced with strip-shaped logs, and then pasted with thin wood veneer on the outside, the surface is smooth and flat, the stability is strong, not easy to deform, and the pressure and strength are purchased according to the thickness of the board.

Question: Is it better to love the core board or the aldehyde board of Hollywood?

The best and most environmentally friendly should be solid wood, but it is expensive, and then it is solid wood multi-layer, followed by solid wood grains, but the premise is to choose large manufacturers to meet the quality and environmental protection standards.

Personally, it is more recommended to have a more cost-effective multi-layer board in terms of performance and price, and if the funds are sufficient, it is more cost-effective to choose solid wood than to choose environmentally friendly board with similar price to solid wood.

Modern furniture is a lot of things. Sheet assembly. Hence the quality of the plates.

It is also a matter of concern to people. There's nothing absolutely eco-friendly here. It's just that we are in the choice of furniture.

It depends on whether the plates used are produced by large domestic factories. Does the manufacturer have a strict management system? Only in this way can the quality of the plates be guaranteed.

At present, the new national standard ENF level is the world's most stringent environmental protection grade standard, and the formaldehyde emission is far better than the European standard and the Japanese F4 star standard. In other words, the board with the formaldehyde emission level of ENF is the most environmentally friendly choice.

Aige Workshop has always adhered to the background of environmental protection, closely followed the development of the industry, resonated with market demand, upgraded the green environmental protection board, and introduced the state-owned enterprise Lushuihe Group ENF negative ion health care board, the test shows that the formaldehyde emission of the board is far lower than the new national standard ENF level environmental protection standard, which is really to defend the green home with strength.

Do you think that's all there is to it? Definitely. ENF negative ion health care board is added with tourmaline ground into powder, through the tourmaline can release negative oxygen ions for a long time, so that the plate has the function of releasing negative oxygen ions, purifying formaldehyde, purifying the air, antibacterial and antibacterial, caring for the health of the family, is a veritable healthy board.

Aige Workshop selects healthy and environmentally friendly boards to create a negative ion space, and gives back to thousands of families with ENF-level environmental protection products.

Start with quality, be proficient in craftsmanship, and be loyal to the original intention. Aige Workshop has launched a new series of [Kangyang Wojia], the door panels and cabinets are made of state-owned enterprise Lushuihe Group ENF negative ion health care board, bringing more than 4,000 negative oxygen ions home, so that you and your family can return to the health care home full of negative ions, feel the fresh and comfortable environment, and your health is guaranteed, which is the greatest wealth of the family.

Note: According to the test results of the National Building Materials Testing Center, the air anion concentration of 3000 ions cm was detected in the customized installation cabinet of Aige Workshop; Actual use will vary due to changes in the environment, and the actual situation shall prevail.

1. MDF.

MDF is made of powdered wood fibers pressed at high temperatures, with a good surface flatness, and the wardrobe made of MDF material has a smooth and smooth surface and is comfortable to the touch. Moreover, the MDF is soft and impact-resistant, has high strength, uniform density after pressing, and is easy to reprocess, so the shape of the wardrobe has a variety of options. Generally, wardrobes made of MDF are used to have a more beautiful appearance and a good visual effect.

However, MDF is very poor in waterproofing and is easy to expand and deform. When cleaning the wardrobe daily, it is necessary to pay attention to maintaining the dryness of the wardrobe, and remember not to leave stagnant water on the surface of the wardrobe, so as to avoid water seepage on the surface of the wardrobe, which will lead to the collision and deformation of the cabinet door and damage the service life of the wardrobe.

2. Solid wood particle board.

Solid wood particle board is a new, high-grade environmentally friendly substrate, which is produced by the process of particleboard. The density of solid wood particle board is relatively high, and the wood fiber particles in the board are large, which preserves the essence of natural wood, and solid wood particle board is very cost-effective, so if the budget is limited, the wardrobe of solid wood particle board is also a good choice. In addition, solid wood particle board is also very environmentally friendly.

In the use of adhesives, the content of solid wood particle board is generally less than 5%, which has strong environmental protection compared with other materials of solid wood particle board and protects human health. In addition, the processing performance of solid wood particle board is as good as that of particleboard, and it can be processed and cut into a variety of shapes, which is convenient for all kinds of furniture production, especially wardrobe making. The wardrobe made of solid wood particle board is beautiful, practical and good-looking, and environmentally friendly, so you don't have to worry about safety.

3. Solid wood multi-layer board.

Multi-layer board is made of three or more layers of solid wood veneer or thin board about one millimeter glued and hot-pressed, and the common ones are three plywood, five plywood, nine plywood and twelve plywood. The wardrobe made of solid wood multi-layer board has high hardness and strong wear resistance, and the surface is not easy to scratch and has a long service life.

The cores of solid wood multi-layer boards are: poplar, miscellaneous wood, eucalyptus multi-layer boards, and the structural strength and stability of these cores are good. As a result, wardrobes made of this type of material are highly impact-resistant, and they do not have to worry about cracking the surface of the door when they are hit by heavy objects in daily use.

4. Fireproof board.

Fireproof board is made of siliceous material or calcareous material as the main raw material, mixed with a certain proportion of fiber materials, light aggregates, adhesives and chemical additives, and made of decorative board by autoclaving technology, and the wardrobe made of fireproof board is the biggest feature is strong stability, strong anti-corrosion performance, and it is not easy to deform after long-term use.

Not only that, the fireproof board also has strong economy, and has high strength, fire resistance and moisture resistance. Therefore, fireproof board is widely used and is a very good building material. The construction of fireproof board has high requirements for pasting glue, and it is necessary to master the thickness of the glue and the glue drying time, and paste it at one time.

Environmental protection grade, the easiest way to see how the environmental protection effect of the plate is to check the environmental protection level, so when purchasing, we should pay attention to whether the environmental protection level of the plate has reached the national standard, and the environmental protection level of the high-quality plate on the market can reach the formaldehyde-free level.

Formaldehyde content, different materials of the board, the formaldehyde content is also different, taking the fresh version as an example, the formaldehyde content of this board is only one-third of the apple, safe and healthy.

Authoritative certification, there are many manufacturers of plates nowadays, to prevent buying counterfeit products, when purchasing plates, we should check whether the authoritative certification of the plates is complete, such as internationally recognized SGS determination, as well as CQC quality management certification.