Smart Grid Machine Problem 30, Smart Grid Machine Problem

No. Mobile phone files can only be recovered using a computer.

2.Incompatible.

Just save the contacts to the SIM card.

To back up text messages and the like, you need to use a PC suite.

The memory card should also be backed up by the computer.

And then the lattice machine. Re-Grid.

Dial key, key and 3 at the same time, then press the power off key.

Select the "Reset Factory Settings" feature in your phone's settings.

Open the phone settings page, find the factory reset function, and click it.

The grid phone is to format the phone, rewrite the preset data, and fix all the files that the user modifies or adds to the preset state of the factory.

Grid machine is for the symbian system, several grid machine methods and results comparison:

1.Input* on standby - the system settings are restored to factory settings, and the files stored in the C drive, such as text messages and business cards, will not be deleted.

2.Enter * on standby – soft bar. Restoring the system to factory settings will delete the personal data of the C drive.

It is possible that line 2 is lost in the branch cavity (although I haven't) and the system will return to its original state. However, it should be noted that if there are some e-disk software (such as call enhancement, screen saver, etc.) that boot up and start the permanent memory, as well as Q9 and T9 fonts, it is invalid to format them with this method.

Therefore, before the soft grid, close all these software and delete the Chinese font files to fully achieve the purpose of restoring the original factory of the C disk. Font files are generally under system fonts, please change the name to the fonts directory to delete the font file, and then delete !. If it is a direct version, you can delete it in the software management.

3.Hard grid - press and hold the call button + 3 number button + * number button + + then press power on when the power is turned on. Until the screen appears formatting....to be loose.

After about a minute, the phone will automatically turn on and it will be done, N70, N72 and other phones will not appear formatting....words, generally see the initial settings let go). Hard Grid will completely delete the personal data of the C drive and then rewrite it to the system files. Line 2 may be lost.

Note: Do not attempt to shut down the machine during the grid, and do not plug in the charger, etc. Also, try to give priority to the soft grid.

4.The most thorough formatting steps are: uninstall all the programs that can be uninstalled in the program management - take out the MMC card - check if there is a system error - format the phone - install the MMC card - format the MMC card - (the mobile phone at this time is the purest basic system).

Hello !

According to your description, the problem that the smartphone won't turn on, it is recommended to try it by following these steps:

When the device is fully charged, after backing up data, press and hold the [Power Button] and [Volume +] buttons for 10 seconds with the device off (off).

After entering recovery mode, move the cursor with [Volume+], Volume-] (see figure below).

Operate 2-wipes again

Select Wipe Data Factory Reset > yes, home] to confirm.

Select wipe cache partition > yes , home] to confirm.

Select reboot system now > yes , home] to confirm.

After doing so, restart and you're done.

If the problem persists after 2-wipes, it is recommended to press and hold the [Power Button] and [Volume-] buttons for 10 seconds to enter fastboot mode

Connect to your PC and use Flash Tool to flash the official ROM to repair the system.

Hope this helps you!!

Grid machine is generally in the mobile phone junk files too much, serious errors can not be recovered or the mobile phone is abnormal, the grid machine will be C: disk content all empty, and then write new system information, so please back up the data and information you need before the grid ruler is blind. There are three types of lattice machines:

1. Soft grid: enter * on the mobile phone, after which you are required to enter the lock code, the initial password is: 12345, if you have changed the mobile phone password, that is the changed password (not Ling rent is the SIM card password), and then a white screen appears, only the word nokia is displayed, 3 5 minutes later, it will be completed, and the mobile phone time will be re-entered after the grid;

2. Hard grid: turn off the computer first, press and hold the dial key, "* key, "3" key while turning on the phone, turn on the power until the word "nokia" appears, this process can not release any button, wait a few seconds until "formatting...... appearsword, then you can release the key. 3 After 5 minutes, the format of the Shenxu system is completed, the phone will automatically restart and enter the standby screen, and re-enter the time of the phone;

3. Through the software grid: install the systemtools software, there is a formatting option in it, you can enter the lock code to grid the machine.

There are several points to pay attention to in the above grid: keep the power absolutely sufficient, do not try to shut down the grid on the way, do not plug in the charger, etc., if it is violated, it may cause serious consequences such as burn-in. There is also a hard grid may be a little damage to the hardware of the machine, not to be foolish, do not use the hard grid when the machine can not be turned on, and one thing to note is that the line 2 will disappear after the grid, and it must be restored to the kf flash.

But you have to back up your stuff before.

Soft grid is recommended first, and if there are still the above problems, then use method 2 to make a hard grid.

This requires formatting the card.

Because there are a lot of programs installed in the card.

You can transfer the cables you need to keep to your computer for storage.

Then format the card.

Then enter *

You need your mobile phone password, if you haven't set it, just enter 12345 and wait for the phone to be automatically formatted.

Don't mess with software in the future.

Some software is very troublesome to install, and it is best to look at the evaluation of this software by other users before you install it.

Sweat. Mine is also n70...The lattice machine can be pressed directly in the standby situation by pressing * on it. There will be no reservations.

It's better, and the ** grouping column inside can be retained.