As soon as I turned on the computer, I had a bunch of English what s going on 5

This message appears because your computer has been shut down illegally (usually there will be some prompts after a forced shutdown or forced restart of the crash).

Meaning: Check your file system in the C drive, the file type of the C drive is NTFS

At least one disk needs to be checked, and you can cancel the check, but it is highly recommended that you continue.

Windows is now checking your disk. I don't really understand the rest either.

In short, you check once, and don't check again next time, otherwise you will have to execute the prompt the next time you turn on the phone.

Are you a Martian? Don't even know that the system automatically checks the files after an illegal shutdown?

You must have something wrong when you shut it down.

Mine is Lenovo.,Now there is a problem with you.,I don't know what to do.,And then your computer is okay? Isn't it just left like this?

Hello, thank you for your patience, I am happy to answer for you, there are several reasons for the English alphabet to appear when the computer is turned on: 1. The BIOS setting of the computer is a problem. Turn on the computer and press F2 to enter the BIOS shortcut key (the BIOS interface of different computers is a little different, refer to the BIOS shortcut key of your own computer itself).

Go into the BIOS to see if it is displayed to the hard disk, and if it is displayed to the hard disk, set the system hard disk as the first boot item on the boot interface, and then save and exit, restart the computer to see. 2. It is a system problem, and the system partition is abnormal. You can use the system USB flash drive to go into the PE to repair the boot boot.

Then no, just reinstall the system. 3. There is a problem with the hard disk. If there is a problem with the hard disk, the hard disk detection software can detect whether there are bad sectors in the hard disk.

If there is a problem with the hard drive, you need to replace the hard drive and then reinstall the system. The above is how to deal with the English letters that appear on boot. If it still doesn't work, it is recommended to go to the computer after-sales outlets for testing or go to a professional computer repair point for testing and maintenance.

The reason why the computer can't turn on and display English is as follows:

1. The operating system file is corrupted.

2. The MBR meter is damaged.

3. The hard disk data cable is loose.

4. The hard disk is broken.

Workaround:

1. Reinstall the operating system.

2. Use a U disk or CD to boot, enter the PE system, and use partition software to repair the MBR table (some software is called repair boot).

3. Check the hard disk data cable and power cable, plug in the connector tightly, and replace it with a new one if the cable is broken.

4. If you can recognize the hard disk in the BIOS, try to reinstall the system, if you can't reinstall it, try to repartition the hard disk, if you can't divide the area, try to format the hard disk at a low level. I can't recognize the hard drive in the BIOS, so I can only replace it with a new hard drive.

Pressing the power button has no response

1. The motherboard jumper is inserted incorrectly.

If such a problem occurs, you should first check whether the interface at the motherboard jumper is installed correctly, if you are really not sure, unplug it all, and use metal objects to short the two pins of "power", if it can be turned on normally, then the first thing to rule out is the problem of the core hardware.

The installation of motherboard jumpers has been bothering many DIY users, many small jumpers are very noisy and will be installed incorrectly if you are not careful, and the current commercial motherboard products are marked with installation logos below the jumper pins, and the corresponding insertion can solve the problem by inserting them in English.

2. The power switch is not turned on, and the power supply is faulty.

Secondly, if the installation of the motherboard jumper is correct, and the case switch button is not faulty, you should check whether the switch at the power input is on, if the power strip and PC power remain on, and the jumper and switch are completely correct, then it can be preliminarily determined that the power supply is damaged or faulty.

Check the power switch as well as the power failure.

In the absence of other power sources to replace. At this time, we should unplug all the output plugs of the power supply, keep the input power supply and short the green and black wires, try to turn on the switch to see if the power supply fan is rotating and running, if not, you can determine that the PC power supply is damaged.

You can wait for the "Enter" key on the key to enter the system after the computer is loaded.