Vantage gas stove is good on the one hand, but what to do if it can t be turned on There is electric

The reason why the Vantage gas stove does not catch fire is because the air inlet and nozzle of the regulator are blocked by rust.

The solution is: if the pressure regulator is faulty, you need to contact professional maintenance personnel in time to replace the pressure regulator of the gas stove, which can solve the problem that the gas stove cannot catch fire.

The fire hole of the burner fire cover is blocked by dirt, which hinders the flow out of the burner mixture, so it is necessary to clean the fire hole dirt. If the nozzle is clogged, you only need to unscrew the nozzle to clean it up. If there is a spark and can hit the stove fire cover, it is best to find the gas stove manufacturer for after-sales maintenance, in this case, the warranty period of the Vantage gas stove is free service maintenance.

Extended information: The introduction of gas stoves that do not catch fire is as follows:

If the sound is soft and weak, the electric frequency is slower than before, and there is a clicking sound, if this happens, it is likely that the battery on the gas stove is insufficient, and a new battery will be solved.

It is also possible that the positive and negative electrodes in the battery tray are rusty, resulting in poor contact, and the rust can be gently sanded off with sandpaper. If the flame splitter and flame splitter seat have bayonets, the bayonet must be aligned. If the buckle is displaced, it will not only let go of the flame, but also cause the flame separator to burn and deform, and the fire separator will be scrapped after a long time, if so, it may need to be replaced with a new one.

You can buy a lighter. I've always been like that.

The reason why the Vantage gas stove can't catch fire:

1. Generally, the pulse igniter has no battery, the air source switch is not turned on or the air pressure is insufficient, this problem can be checked by the user himself.

2. It may also be the ignition electrode, the distance of the induction electrode is improper or polluted; If the air pressure is too high, the air velocity is too fast, and the impact spark is not a big problem.

3. Maybe the ignition nozzle is too large, and the nozzle is too large, causing too much airflow and impacting the electric spark; The head is damaged, resulting in ignition at the damaged part too close and other problems.

4. If it is piezoelectric ceramic aging; The ignition output cable is not firmly connected with the porcelain head; If the output cable is damaged, causing an ultra-close ignition, it needs to be repaired by a maintenance worker.

Summary. If there is a normal one, there is no problem with the battery. There is a strong smell of gas, which means that there is no problem with the pipes either.

1. Wipe the lighter needle and the corresponding stove head with a cloth, and if the dirt and rust are serious, use sandpaper with water. 2. Embedded disassembly panel, desktop lifting, check whether the line on the fault side has fallen off. 3. Use a multimeter to measure whether the micro switch behind the knob in the circuit is invalid or in poor position.

Vantage gas stove one can't be hit, one is normal, what should I do?

There is a return to the circle that is normal, indicating that there is no problem with the battery. There is a strong smell of gas, which means that there is no problem with the pipes either. 1. Wipe the lighter needle and the corresponding stove head with a cloth, and if the dirt and rust are serious, use sandpaper with water.

2. Carefully disassemble the panel with embedded disassembly, lift the desktop, and check whether the line on the faulty side has fallen off. 3. Use a multimeter to measure whether the micro switch behind the knob and Shijing in the circuit is invalid or in poor position.

1. Clean up the root of the high-temperature metal wire of the lighter, which may flow there due to the overflow of liquid in the pot, so that the insulation is poor and the spark is not strong. It can be compared with another normal one. 2. The distance between the high-temperature metal wire and the stove should not be too close or too far.

If the distance is too far, the spark is weak, or there is no fire; The distance is too close, the sparks are short, and it is also not easy to ignite the fire. 3. The size of the damper should be appropriate. The damper opens wide and is not easy to ignite; The damper is small, there will be a yellow fire, and the burning trousers are not full of rounds.

Many people have encountered the problem that there is no spark in the gas stove, and when encountering such a problem, first of all, we have to check the battery to see if the battery is still charged? If there is no electricity, you need to change the battery. Next, we press the knob to see if there is a spark, if there is no spark, it is a problem with the ignition needle, just change the ignition needle.

If the ignition needle is replaced, it is that the pulser does not work, see if the connection between the pulse and the battery box is intact, if it is intact, then it has to be replaced with a new pulser.

Another problem we often encounter is that the gas stove has a spark, but it does not ignite. We first have to check if there is gas coming out, and we can use a lighter to light it and try it. If the ignition does not ignite, we turn the ignition needle so that the spark hits the edge of the nearest small hole, and adjust the damper, because the damper is too large, the mixing ratio of gas and air is too small, and it is not easy to ignite.

Adjust down first to make the gas concentration high; After ignition, adjust the damper to the blue flame, but the bottom of the flame does not leave the blowhole.

Another common problem we encounter is that the gas stove can be lit on fire, but as soon as the hand is released, the fire is extinguished. We can overhaul from the following aspects, after ignition, after ignition, whether the fire has burned the thermocouple, if not, it is possible that the fire cover is not placed, it is possible that the small hole of the thermocouple is blocked by debris or water so that the fire can not come out, it is possible that the thermocouple is displaced or sinking, and it can be eliminated; After ignition, the fire burns to the thermocouple. It is possible that the thermocouple itself is damaged, and it can be replaced; It is possible that the interface between the thermocouple and the valve body is not in good contact.

In addition to the above problems, we will also encounter the situation that the knob of the gas stove cannot be pressed. The solution to this problem is relatively simple, generally because the knob rod of the valve body assembly is not installed in the center of the panel hole, and the bottom of the knob is stuck, and the panel can be adjusted.

Several conditions for Vantage gas stove ignition:

Telephone: Telephone:Ignition needle failure: breakage, rupture, poor contact. (The ignition needle is white and makes a "tick-tick" sound accompanied by sparks when ignited).

Ignition pulse is partially damaged: The ignition pulse is provided with high voltage, divided into two outputs, and you say that one side can be ignited, so it seems that there may be a problem with the other way.

The fire cover is dirty, resulting in no ignition, and the fire cover needs to be cleaned. (The fire lid is a circle placed on the stove, with many small holes dug in it for ventilation)

Fire but can not keep the cause of the failure:

The thermocoupler is too far away from the fire cover, push it inward with pliers, and try to light the fire while pushing, only when this thing is heated will it not automatically go out.

If the thermocoupler line is in poor contact, reconnect the terminal.

If not, poke the small holes with a toothpick in the flame-out state until ventilation.

, solenoid valve problem, this needs to be replaced by professionals.

Note: Under normal circumstances, the thermocoupler will not be damaged;

The solenoid valve is more expensive and needs to be repairedIt is best to inquire about the local ** from the maintenance department first.

Help you get here, and you will understand.

1. Check whether the inner fire cover and the outer fire cover are properly placed, especially the inner fire cover (the middle small fire cover, good to the corresponding position).

2. If the fire cover is okay, it is to change the battery!

3. There is also a situation where the damper is too large, especially the inner damper, and it is good to adjust it down.

Replace the battery first and make sure that the battery is okay, that is, the fire cover is not placed properly.

What happens if the gas stove doesn't catch fire:

Vantage gas stove repair office in the city.

1. Confirm that the power supply is normal;

2. Check that the ventilation volume is normal;

3. Check whether there is a sign of ignition and whether the igniter is discharged normally; If it is abnormal: a. switch problem, b. ignition problem;

4. Check whether the ignition needle is connected virtually and whether the ignition needle is discharged normally;

5. If it can be ignited and the flame is unstable, check whether the detection needle is working normally.

Hello, for you to find out that the Vantage gas stove can sometimes ignite and sometimes does not ignite the reason is 1, generally the pulse igniter has no battery, the gas source switch is not turned on or the residual pressure of the gas section is insufficient, this problem, the user can check it out by himself. 2. The grip may also be an ignition electrode, and the distance between the induction electrodes is improper or polluted; If the air pressure is too high, the air velocity is too fast, and the impact spark is not a big problem. 3. Maybe the ignition nozzle is too large, and the nozzle is too large, causing too much airflow and impacting the electric spark; The magnetic head is damaged, resulting in ignition at the damaged part too close and other problems.

4. If it is a piezoelectric ceramic aging quietly; The ignition output cable is not firmly connected with the porcelain head; If the output cable is damaged, causing an ultra-close ignition, it needs to be repaired by a maintenance worker.