The bathroom area of the new house is relatively small, and the decoration suggests that the toilet

The bathroom area of the new house is relatively small, and the decoration suggests that the toilet can be moved. This is a very normal situation in the decoration industry, and if you move within 15cm, you can consider using a special shifter.

The bathroom area of the house is relatively small, the toilet can be moved, and the moving distance is best kept at about 15 cm.

Toilet toilets can be moved, and there are many lengths of toilet shifters on the market, from 2 cm to about three meters. A toilet shifter is a device (pipe fitting) that can change the position of the floor drain when the floor drain and the toilet drain are not suitable. The Powerstone Toilet Shifter can change not only the position of the front and back of the ground drain, but also the position of the left and right of the spout, as well as the spacing of the Powerstone tank.

How to install a toilet The first step is to install the rubber ring of the toilet outlet pipe. When we open the toilet box, we will find the water outlet pipe at the bottom of the toilet bowl and the rubber ring it is equipped with. At this time, we put the rubber ring on the outlet pipe at the bottom of the toilet, and then tightly connect the rubber ring with the PVC sewer pipe we reserved, so as to complete the preliminary installation of the toilet.

The second step is the solidity of the toilet. There are two ways to fix the toilet bowl in front of Jianshan Yu: the first is to hit the expansion bolt, and the second is to play the sealant.

At this stage, the installation of toilets in the family is mainly based on sealant, the practice is to fix the toilet to the ground, at this time the toilet is basically very flat, and then the bottom of the toilet and the ground tile junction part of the glass glue or other special sealant, glue must be played tightly.

What is the structure of the lower part of the toilet, the first part is the outlet pipe at the bottom of the toilet. The lower outlet pipe of the toilet bowl is a water outlet made of ceramic. When we turn the toilet over and look at the bottom of the toilet, we will find that the bottom of the toilet has an almost S-shaped elbow, and then there is a ceramic pipe that comes out of the bottom of the toilet, which is the outlet pipe of the toilet.

The second part is the connection on the toilet outlet. Generally speaking, the toilet outlet pipe is covered with a rubber sealing ring, the role of the rubber sealing ring is very large, it is a key component to realize the connection between the porcelain outlet pipe and the PVC pipe at the bottom of the toilet. So the rubber ring must be installed correctly and in place.

1. To move farther, the floor of the toilet must be raised and a water trap must be added while moving the pipe, which is used to prevent odor from backflowing. Since the diameter of the drainage pipe is generally 110mm, the ground should be raised by at least 120mm to leave some room for the slope of the cement mortar and sewer pipe.

2. In addition to considering the blockage problem when the toilet is displaced, we must also pay attention to the tightness of the pipe. This is a repeated reminder from experts to the owners, especially the interface between different pipes, to check whether there are leaks many times, to ensure that there is no leakage, sealing rings, glass glue and so on.

3. A few sewer pipes in the bathroom, don't move if you can! To alter the toilet. The projects he has done are usually to change the toilet bowl by about 10 centimeters, using a special toilet shifter (shaped like two staggered elbows).

Since the movement is not very large, it is unlikely that a blockage will occur. If you want to move a little farther, there is no shift you can use, you can only do it on the sewer pipe. Normally, he says, they don't do this because the elbow junction is more difficult to handle.

When it comes to decorating the bathroom, many people are unhappy with the original arrangement, especially the toilet, so many users want to move it, but did you know? Of course, some people think that if the toilet is moved, the hidden dangers in the later stage will become more, so it is good to worry about the toilet shift in the bathroom? Below I will give you a brief introduction to the precautions for toilet displacement in the bathroom, hoping to provide some help for your pattern change.

Is it okay to move the toilet in the bathroom.

Of course, if you want to move, the distance is less than 15cm, you can use a special toilet shifter to operate, if it exceeds 15cm, you need to carry out structural transformation of the bathroom.

Toilet displacement method: Use a toilet shifter.

This method is relatively fast, but there are some defects, such as short distance, affect the hand, etc., generally speaking, the displacement should not exceed 10mm, in addition, the problem of blockage and attention to the tightness of the pipeline should be considered, and at the same time, it is necessary to check whether there are leaks many times, and the leakage prevention measures are comprehensive. Toilet Shift Method: Re-hole the toilet to move the toilet.

Dig a new hole in the ground, dig out the original sewer main pipe for backup, connect the newly purchased PVC pipe to the original main branch pipe, and change the toilet drain to the new location specified by the user.

Toilet displacement method: raise the floor.

Generally speaking, if this method is adopted, it means that the developer is more satisfied with the location of the toilet, mainly because the bathroom is a smaller second-hand house, if it is higher than 15cm, if you want to shift the element, you need to raise the floor, and if the toilet is changed to more than 10cm, it is best to reinstall the pipe, and raise the bathroom to the ground about 12cm.

What to pay attention to when the toilet shifter.

1. Use a toilet shifter.

This kind of situation usually takes into account whether the toilet spacing is appropriate, if you are not satisfied, you need to adjust its orientation, generally within 10cm can be moved, but you must pay attention to prevent the toilet blockage, of course, if you can not use it, try not to use it.

2. Sunken toilet.

3. Change the position of the sewer pipe.

If you want to change the direction of the sewer, you must negotiate with the downstairs residents to make a big elbow at the top of the lower floor, which is much better than using a shifter, and it will not be blocked, but it must be done well after the change.

The above is the content of the toilet shift element in the bathroom, I believe that most people have a further understanding of the toilet toilet shift, I hope it will help you!

Since the moving position is not very large, it is unlikely that a blockage will occur. If you want to move a longer distance, there is no shift to use, and the sewer pipe can only be modified. Generally speaking, he says, they don't recommend this because the elbow junction is more difficult to handle.

He said that generally new houses do not need to consider this kind of problem, because basically the developer's design is reasonable, and the problem is concentrated in the second-hand house with a smaller bathroom. If the toilet displacement distance is within 5cm, then he recommends that the landlord go to the market to buy a lifter to use, although the merchant will say that the shifter can be used for 5 15 cm toilet shift, in fact, more than 5 cm is not very effective (there will be blockage, etc.). If the toilet is changed more than 10 cm away, then it is better to reinstall the pipe and raise the bathroom floor by about 12 cm.