What s the matter with the water dispenser leaking when boiling hot water?

1. The faucet is broken.

If it is caused by a loose faucet, you can tighten it directly, and if it is caused by blockage, just disassemble and clean it. But if it is damaged, the faucet must be replaced.

2. Water leakage of internal components of the body.

Some water dispenser leaks are also caused by internal components, such as broken silicone tubes, leaking ice galls, or cracked water bottles, etc., which must be replaced to solve the problem.

3. The drinking bottle is damaged.

If the water leaks due to damage to the drinking bottle, it needs to be replaced with a new one.

4. The check valve is damaged.

If the check valve is damaged and the water leakage is caused by it, you can directly replace it with a new one.

Advantages of water dispensers.

1. Save money and costs.

In the past, most families used to boil water at home, and if they boiled water for a long time, it would greatly increase the electricity bill at home. But if you have a water dispenser at home, you don't need to worry about this problem. Because the water dispenser uses heat exchange technology, it is very energy-saving, and it can save electricity bills after use.

2. The smart water dispenser has a purification function.

In general, the water in the water dispenser will be purified. Therefore, the purified water will not only be safer, but also ensure the health of the human body.

3. The water quality is good.

Because water dispensers generally have a purification function, the water after purification generally does not have any strange taste. It is precisely because of the good water quality of the water dispenser that the water dispenser has become the choice of countless families.

Water dispenser leakage solution

1. If there is a leakage of bottled water, it will lead to leakage of the hot water outlet of the water dispenser, and only need to replace a new bottled water to solve this problem.

2. If it is not caused by the problem of bottled water, you need to replace a smart seat. The function of the smart seat is to push the air that enters the water distribution tank from the mesh into the bucket, and then let the bucket exchange positions with the air to enter the water dispenser.

3. If the water does not leak when the water is not boiled, and the hot water port leaks when the water is boiled, then the heating thermostat inside needs to be removed and replaced with a new one.

4. If the water will leak when it is not boiled, then there is a problem with the check valve of the water filter, and it needs to be replaced with a new one.

5. In addition, it is also possible that the float has been damaged, resulting in leakage of the hot water port, and the float needs to be removed and replaced with a new one.

If there is bottled water on the water dispenser, it is estimated that it is caused by the leakage of the bucket, and the leakage point is between the mouth of the bucket and the cap of the bottle. All bottled water is filled repeatedly, and during the filling process, the lid is opened, and the barrel mouth will be worn to a certain extent, and the bucket will not leak.

If it's not a bucket, you can only replace the smart seat. The air first enters the water distribution basin from the mesh, and then enters the bucket from the smart column, and the water and air in the bucket exchange positions and then flow into the water dispenser.

The small round opening is exhausted, and if you don't exhaust the heating gall, it will explode. If you don't boil the water, you can change the heating thermostat, if you don't boil the water, it will leak, that is, the check valve at the bottom of the water filter is broken, just change it. In addition, the float will leak if it is bad, so it will be good to change the float.

Use and maintenance

1. The handling machine should be handled gently, and when the water dispenser refrigerated by the compressor should be moved as much as possible, if it is to be tilted, its inclination shall not be greater than 45 degrees, and it should be stationary for a period of time after handling before it can work.

2. When using the water dispenser for the first time, clean the containers and pipelines of the water dispenser with clean water, then unscrew the drain valve, and tighten the drain valve after draining the remaining water in the machine. After adding a large bottle of water, turn on the hot water faucet, and then plug in the power supply and turn on the heating switch after the water flows out, so as to avoid dry boiling and prolong the life of the machine.

3. If the water dispenser is out of service for a long time, please turn off the switch of the machine and unplug the power plug, then unscrew the drain valve, drain the remaining water in the machine, and then tighten the drain valve (please pay attention to hot water scalding during the draining process).

4. It is best to disconnect the power supply when not in use at night, which can save energy and ensure safety when no one is in use.

5. During the use of the machine, it is recommended to clean and disinfect it once in about 3 months according to the specific situation, and use it for one year.

6. The water dispenser should be placed in a ventilated place to prevent moisture, avoid direct sunlight, and stay away from heating. The water dispenser should be about 15 cm away from the wall and should not be placed near valuable furniture and other household appliances to avoid splashing water and damaging the items. The water dispenser must be placed smoothly to prevent the machine from making noise.

7. It is forbidden to use organic solvents such as gasoline to clean the surface of the machine.

8. If the power cord is found to be damaged, the water dispenser must be replaced with a special soft cord or contact the dealer. The machine must use a socket with a grounding device and a leakage protector to prevent the enclosure from becoming electrified.

9. Children should not play next to the water dispenser, and if necessary, replace the hot water faucet with a safety faucet to prevent children from being burned.

10. Do not put the metal rod into the back plate ventilation window, so as not to damage the fan or cause electric shock; Do not cover the fan ventilation window to avoid damage to the semiconductor refrigeration components due to poor exhaust and poor heat dissipation.

11. When the water dispenser refrigerated by compressor is disconnected, it must be started again after 3-5 minutes to prolong the life of the machine.

12. When pressing the faucet to receive water, do not use too much force, so as not to fall out or damage the rotating part of the hand.

It should be that the hot water mouth faucet is broken, go to the specialty store and buy a faucet of the same model.

Because the hot water outlet of the water dispenser is at a high temperature, and the temperature difference changes greatly, it is easy to leak.

How to replace the leaking faucet at the outlet of the water dispenser:

1. First of all, you should unplug the power supply;

2. Take down the water dispenser bucket or put the water in the bucket away;

3. Remove the back cover screws and open the back cover;

4. Loosen the faucet nut and pull out the faucet;

5. Replace the new faucet with the same disassembly method. If the faucet is leaking, you can tighten the loose cover, disassemble it to clean the impurities, and replace the faucet if necessary to solve the problem.

What should I do if my water heater is leaking.

First of all, you need to turn off the hot water switch and unplug the water dispenser to ensure safety.

Next, remove the hot water container from the water dispenser and empty it.

Check whether the seal of the hot water outlet of the water dispenser is loose, aged or damaged, and replace the seal if there is a problem.

If there is no problem with the gasket, you need to check the hot water line for blockages or leaks. Hot water lines can be cleaned and disposed of using professional service tools.

After completing the inspection, reinstall and connect all the parts, and after confirming that all the problems have been dealt with, restart the water dispenser and turn on the hot water switch to test whether there is still water leakage.

If none of the above methods can deal with the problem, it is recommended to contact a professional home appliance after-sales service center for more detailed maintenance and inspection. At the same time, in daily use, we must pay attention to the maintenance of the water dispenser, and pay attention to prevent foreign objects from entering the inside of the water dispenser to ensure its normal operation and service life.

If the hot water outlet of the water dispenser is leaking, you can try the following methods:

1.Check that the hot water spout is tightly closed: First check that the hot water spout is tightly closed, and if not, try to tighten it.

2.Replace the hot water faucet: If the hot water inlet is still leaking, it may be a problem with the hot water faucet, and you can try replacing the hot water faucet.

3.Clean the filter: The filter may become clogged with dirt, causing the hot water port to leak. You can remove the filter and wash it.

4.Check the water pipe connection: If the above methods do not solve the problem, there may be a problem with the water pipe connection, you can check whether the water pipe connection is loose or cracked.

If none of the above methods work, it is recommended to contact after-sales service or professional maintenance personnel for repair.

If the hot water outlet of the water dispenser is leaking, you can follow the steps below to troubleshoot:

Cut off the power supply: First cut off the power supply to the water dispenser to avoid the risk of electric shock.

Cleaning and inspection: Carefully clean the hot water vent and surrounding area, and check for fouling or other blockages that affect cooling, or if there are any broken or cracked areas causing water leaks. It is important to note that wait until the water dispenser has cooled completely before inspecting and repairing it.

Replace the seal: If you notice that the seal at the hot water port is aged, hardened or broken, it needs to be replaced. You can take the seal to a nearby store to buy a new one and use a tool to install it to the hot water outlet.

Contact after-sales service: If none of the above measures can solve the problem, or because you are worried that the water dispenser may be damaged when you repair it, please contact the after-sales service of the water dispenser to solve the problem.

Water leakage after the water dispenser is heated may overflow due to the bucket. In addition, when there is a small amount of water in the bucket, do not pick up the bucket and let the water flow into the smart seat of the water dispenser. This can cause pressure imbalances and leaks. It may be that the water dispenser is leaking.

Reasons why water dispensers always leak:

1. Due to the long use of the faucet spool, the wear or aging of the spool can easily lead to the leakage of the fountain faucet.

2. In the process of use, the water dispenser faucet faucet that is loose or not tightened will also cause the water dispenser faucet to leak.

3. When the water inlet pipe of the water dispenser is not firmly connected or the water inlet pipe of the water dispenser is broken, it will cause the phenomenon of water leakage of the cooling bladder of the water dispenser, and eventually lead to the leakage of the water dispenser.

Solution: 1. The user should replace the faucet valve core of the water dispenser.

2. It is necessary to re-tighten the water dispenser faucet to ensure that the water in the water dispenser does not flow out.

3. On the leaky water fountain, we will unplug the water fountain and turn off the main power supply, so as to ensure that there is no water leakage. The bucket must be removed. Don't leave the water dispenser on all the time, keep an eye on it.

Answer the leakage part of the water dispenser Inside: including the aging and cracking of the internal silicone pipe, the aging of the welds of the hot and cold tanks, the leakage of the ice gall, the leakage of the pipeline machine (solenoid valve), the overflow caused by the water bottle and other components. Workaround:

Replacement parts. Top: If there is a leak on the top, it is usually caused by a cracked part of the water bottle.

The other is that there is a problem with the float of the water purification bucket and it cannot be sealed, but this situation generally does not happen. Solution: The use is to check the water bottle for cracking.

Faucet: Most of the reasons are loose head covers, rupture of the internal silicone sleeve, or impurities and scaling inside. Workaround:

Tighten the head cap and clean the impurities. If none of the above work, then only the faucet can be replaced. What is the cause of water dispenser leakage Maintenance methods for common water leakage parts of water dispensers.

If there is a leak in the water dispenser, it is the reason for the barrel, and there must be a crack on the barrel where the air intake! You can change the bucket of water, you can also take the bucket down and fill the water dispenser with water to see, it will definitely not leak! If it is still leaking, it is a problem with the internal connection of the water dispenser, you can open the back cover yourself and see it, the inside is very simple!

90 is the barrel reason.

**Leak? If it is a faucet, tighten it firmly under the switch of the faucet.

Water dispenser hot water leakage is a common problem, usually caused by a design flaw or improper use of the water dispenser itself. Here are some of the reasons why a sedan car may cause a hot water leak from a water dispenser:

1.Poor sealing: The heating system of a water dispenser usually consists of a heating element and a heating barrel. If the heating bucket is not properly sealed, it will cause hot water to leak out of the container.

2.Excessive temperature: The hot water temperature of the water dispenser is usually between 80 and 100. If the temperature is too high, it will cause the seal of the heating drum to loosen, which in turn will cause hot water to leak out.

3.Too high water pressure: If the water pressure in the environment of the water dispenser is too high, there is a risk of leaking water in the hot water line of the water dispenser, especially at the joints.

4.Clogged pipes: If the pipes inside the water dispenser are clogged, it will also cause hot water to leak out. This is usually due to limescale or other dirt.

5.Overuse: If the water dispenser is overused, the seal of the hot water bucket is loose, which in turn causes the hot water to leak out.

In order to avoid hot water leakage from the water dispenser, we can take the following precautions:

1.Pay attention to water pressure: When using a water dispenser, pay attention to the water pressure in the environment, if the water pressure is too high, you can take some measures to reduce the water pressure.

2.Regular cleaning: Cleaning your water dispenser regularly can prevent clogged lines, which can reduce the likelihood of hot water leaking.

3.Use the right amount of water: Be careful to use the right amount of water when using the water dispenser, excessive use will cause the seal of the hot water bucket to loosen, which will cause hot water to leak.

4.Pay attention to the installation location: The installation location of the water dispenser is also very important. Choose a stable ground to ensure the stability of the water dispenser and avoid loose seals of the hot water bucket.

To sum up, if the water dispenser is leaking hot water, you can consider the above factors and take corresponding precautions to avoid the problem.