When mopping the floor, pour something to mop it cleaner

First, we can add some soapy water to the water for washing the mop, the decontamination ability of the soap is very good, and the mop after washing is very clean and hygienic. We use to mop the floor will be cleaner, which will save a lot of trouble, and after mopping the floor with soap and water, the ground is not easy to get dusty, and there is no need to clean it often, which is convenient and convenient.

Article **2 Second, the smart cleaning aunt will also use some rice water to mop the floor.

Rice washing water is a natural stain remover. This kind of water is used to mop the floor without damaging the surface of the floor, the decontamination effect is good, and it can also play a role in maintenance. The floor after washing rice water looks particularly clean and bright, there are no marks and no dust, and the whole house looks particularly clean and hygienic.

Article **3 Third, if the home is a wooden floor, we can also add a drop or two of salad oil.

Mopping the floor with such water is particularly bright, and it can also have the effect of maintaining the ground. These are all life hacks, and if we use them correctly, they can solve a lot of problems for us. Finally, we have to look at whether the mop at home is easy to use, and the mop must be made of cotton at home, which has better water absorption and cleaner mopping.

Article**4 If the mop head at home is too small, we can also buy one or two cotton towels to use with it. Divide the towel into mop-like strips of cloth and tie them up, so that mopping the floor is particularly easy and the floor is exceptionally clean. The mop is also a very important thing at home, we must not buy defective products, it is not practical and costly.

How to mop the floor:

1. Add white vinegar with baking soda and dish soap. First of all, we first prepare white vinegar, baking soda, and dish soap, then mix 30 ml of white vinegar, 20 grams of baking soda and 1 liter of water and stir well, and finally add an appropriate amount of dish soap, and then pour the water into the mop pool to wash the mop, and then go to mop the floor. This homemade cleaning water is more suitable for scrubbing kitchen floors, because kitchens are generally greasy areas, and baking soda and white vinegar are very effective in removing grease stains.

The mop cleaned with this cleaning water is also very clean, and after mopping low, the floor is very clean.

2. Add white vinegar and fabric softener and water. The method is basically the same as above. We mix 30 ml of white vinegar, 30 ml of fabric softener, and 1 liter of water and stir well, and then wash the mop, or directly wash the mop with a homemade cleaning technique and mop the floor, or sprinkle the floor with homemade cleaning water and mop it with a mop.

Clean the floor with white vinegar and fabric softener, mainly because the freshly mopped floor is easier to absorb dust, and adding these things can reduce the friction between the mop and the floor and prevent static electricity. Moreover, the fabric softener will also form a protective film on the floor, so that after mopping, it can basically ensure that the floor is not dirty for a week.

Tile floor: Prepare a basin, add a spoonful of salt, a drop of dish soap, a few drops of fabric softener, you can also use shampoo or conditioner instead, and then drop a few drops of toilet water, do not add toilet water when there are pregnant women and infants at home, and then add warm water to mop the floor water, and finally, use a mop to mop the floor with mop water.

2.Wooden floor: If it is a mopping wooden floor, you can squeeze a little lemon juice in the water, which can play a role in maintaining the floor, effectively preventing the floor from drying out and killing mold, and only need to add a little material to mop the floor and be labor-saving and clean.

You can pour some dish soap. Soap powder. Excess sorghum wine is also available, the key depends on what material the ground is made of. Decision. There are also mahogany floors or good wood. It's about waxing.

When mopping the floor, sprinkle a little laundry detergent on the ground and you can mop it clean. However, after taking off the laundry detergent, you must clean the mop with clean water and drag it again.

1. Add water to the mop bucket, and then pour in a little salt, this salt can not only sterilize and disinfect, but also make the ground dry quickly, pour a little toilet water, this flower water can not only prevent mosquitoes, but also give incense to the room.

2. Add water to the mop bucket, and then pour in a little white vinegar, which has the effect of sterilization, disinfection and odor removal, and then pour in a little conditioner, which can prevent static electricity from falling on the ground and dust, and can also make the floor tiles brighter.

1. Wipe the unclean place with salt.

Edible salt has a cleaning effect, if there is oil stains on the floor, you can pour the salt on the oily place, and then drag it back and forth several times with a mop, when the salt and grease touch, it will dissolve, and the natural oil stain will be removed.

2. Mop the floor with milk.

In life, we often drink milk, and sometimes there is milk that we can't drink, and we don't lose much of what we don't drink and keep it for mopping the floor. Dry a little milk before mopping the floor, maybe sprinkle a little milk on a dirty place, and mop the floor again after a while, and you can mop it cleanly.

3. Soap mopping method.

Soap is also a commonly used cleaning product in our lives, you can take a part of the soap into hot water to dissolve, and then use the dissolved water to wet the mop to mop the floor, not only has a decontamination effect, but also has a faint fragrance in the house.

4. Rice water.

The water used to wash rice can actually be used as a detergent. When mopping the floor, you can directly wet the mop with rice washing water, and then mop the floor, which can not only remove floor stains but also remove static electricity.

5. Add dish soap and an appropriate amount of toilet water to the mopping water.

This will make the mopped floor cleaner and brighter, and it can give off a fresh fragrance.

6. Add some fabric softener that will be used in laundry to the water for mopping.

Mopping the floor with fabric softener is more translucent and can also reduce the generation of static electricity, so that the floor is not easy to fall dust.

Start by preparing a basin and pouring water into it. Then pour some salt into the basin. Salt has the effect of sterilization and disinfection, and can also speed up the evaporation of moisture on the floor, so that the floor is easy to dry out after mopping.

Then pour some toilet water into the pot. Toilet water has the ability to remove dirt while retaining the aroma after mopping the floor. Finally, put the mop cloth in it and wash it, wring out and mopping the floor.

In this way, mopping the floor is fast and clean, and you are no longer afraid of the trouble of mopping the floor and mopping it uncleanly.

If you want to mop the floor cleanly, the best way is to kill a little water before mopping, and then treat it with a little detergent according to the composition of the stains on the ground, and then rub it on the ground with a mop, and after the substance is removed, then use a soft mop with a little more water to mop the ground again. Finally, wipe it again with a relatively dry mop, and you can mop the ground clean.

Mopping the floor can be cleaned with a mop, don't wait for too dirty to mop, mop the floor every day, so that it will be clean.

What is the cleanest method to mop the floor, I think it should be the most convenient and cleanest to use an automatic sweeper. At present, unmanned sweepers are not expensive, they are also more popular, and more importantly, they save mopping time.

The floor at home is best to squat down and wipe it with a rag, so that the ground will be cleaner.

The best way to mop the floor is to mop it with a damp burlap for the first time, and it is cleanest to mop it with a dry rag for the second time.

Hello friends, in the current situation, the best way to take off the clean should be to choose a mop mop, which is the best, and you can also exercise your body, you can't use that kind of mechanical automatic mopping, automatic mopping is not clean.

If you want to mop the floor and mop it cleanly, the most important thing is to choose a better mop, if the mop is better, then mopping the floor is also very convenient, and it can also be mopped very clean.

Of course, it is best to mop the floor with a mop mop, so that the floor will be mopped cleanly and will leave no traces.

I think it's better to mop the floor with a dry mop, so that you can mop your floor cleanly, and at the same time, you will have a good operation.

There is no special way to mop the floor, as long as you use a more comfortable mop When mopping the floor, be careful, I think you can mop it cleanly, and you will naturally have experience.

With the traditional dun cloth, the cleanest, really in the help you look forward to adoption,

Discharge cooling is another type of convection cooling. Unlike regenerative cooling, the coolant used for exhaust cooling absorbs heat to the thrust chamber and is discharged out of the combustion chamber instead of entering the combustion chamber to participate in combustion. Direct drain coolant reduces the thrust chamber specific impulse, so the coolant flow for drain cooling needs to be minimized while only using drain cooling at the outlet section of the nozzle that is relatively less heated.

There is also radiative cooling, in which the heat flow is transferred from the combustion products to the thrust chamber, and then the heat is radiated by the thrust chamber wall to the surrounding space. Radiative cooling is characterized by simplicity and small structural mass. It is mainly used in the extension section of large nozzles and the thrust chamber of small thrust engines using high-temperature resistant materials.

When cooling in the thrust chamber of the tissue, a relatively low temperature liquid or gas protective layer is established on the surface of the thrust chamber wall to reduce the heat flow to the thrust chamber wall, reduce the wall temperature, and achieve cooling. Internal cooling is mainly divided into three methods: internal cooling (shield cooling), membrane cooling and diaphoretic cooling of head tissues. After the internal cooling measures are adopted in the thrust chamber, the mixing ratio near the wall of the combustion chamber is different from the optimal mixing ratio in the central area (in most cases, the near-wall layer rich in fuel is used) due to the need to reduce the temperature of the protective layer, resulting in the uneven distribution of the mixing ratio along the cross-section of the combustion chamber, so that the combustion efficiency is reduced to a certain extent.

Membrane cooling is similar to shield cooling in that it cools the thrust chamber wall by establishing a uniform and stable coolant film or air film protective layer near the inner wall surface, except that the coolant used to establish the protective layer is not injected by the injector, but is supplied through a special cooling belt. The cooling band is generally arranged in a cross-section of the combustion chamber or the convergence section of the nozzle. There can be several cooling bands along the length of the combustion chamber.

In order to improve the stability of the membrane, the coolant often flows through the gaps or small holes in the cooling belts, and when sweating is used, the thrust chamber wall or part of the inner wall is made of porous material with a pore diameter of tens of microns. Porous materials are usually sintered with metal powders or pressed with metal mesh. In this case, the number of pores per unit area is increased by making the micropores in the material as evenly distributed as possible.

The liquid coolant penetrates into the inner wall, creating a protective film that reduces the density of the heat transferred to the wall. When the flow rate of liquid coolant used for sweat cooling is above a certain threshold, a liquid film is formed near the wall of the thrust chamber. When the coolant flow rate is below the critical flow, the inner wall temperature will be higher than the coolant boiling point at the current pressure, and some or all of the coolant will evaporate, forming an air film.

In addition to the above thermal protection, there are other thermal protection methods such as: ablation cooling, thermal insulation cooling, hot melt cooling and composite protection of chamber walls. 3. Thermal protection scheme of high enthalpy gas generator Based on the above methods and the actual situation, the thermal protection method of high enthalpy gas generator is obtained.

The combustion chamber of a high-enthalpy gas generator differs from that of a liquid rocket engine, eliminating the front thrust chamber part, making its structure simpler and more effective. Then, the thermal protection involved is the thermal protection part of the combustion chamber wall. As the fuel enters the combustion chamber, it quickly decomposes and releases large quantities.

1. Salt: Edible salt has the effect of cleaning, and there is oil stains on the floor, so you can pour the salt on the oily place, and then drag it several times with a mop, when the salt and grease touch, it will dissolve, and the oil stain will be removed.

2. Milk: Sprinkle a little milk on a very dirty place before mopping the floor, and then mop the floor after a while, and you can mop it very cleanly.

3. Soap: You can take a part of the soap and put it in hot water to dissolve, and then use the dissolved water to wet the mop and mop the floor, which not only has the effect of decontamination, but also has a faint fragrance in the house.

Mopping the floor at home can also be clean and bright, saving time and effort? Here are a few things to try.

1.Mop the floor with warm salt water. Prepare a basin of warm water, put two spoonfuls of salt, and when the salt melts, mop the floor according to the normal process.

Mopping floors with warm salt water is not only clean and bright, but also has a germicidal effect without damaging tiles and wooden floors, making it a simple and easy way to operate.

2.Mop the floor with rice water. Rice washing water for cooking, let it stand overnight, pour it into the mop pool, add an appropriate amount of conditioner and stir well.

Rice washing water is known to be very cleanable and easy to obtain, reducing waste. Mopping the floor with rice washing water, the floor is not easy to get dusty, clean and bright, this method is simple and practical.

3.Mop the floor with lemonade. Drop an appropriate amount of lemonade into the water and mop the floor. Mopping the floor like this, the floor is clean and bright, and there is a light fragrance.

4.Mop the floor with white vinegar and baking soda. Add an appropriate amount of white vinegar to the water, add a very small amount of baking soda, and mop the floor according to the normal process.

White vinegar and baking soda together will produce a strong chemical reaction, is a widely used cleaning method in daily life, not only simple and easy to operate, but also white vinegar has the effect of sterilization and disinfection, can quickly decompose bacteria and stains, open the window for ventilation after mopping, keep the indoor air fresh, and make the floor clean and bright.

5.Mop the floor with cooking oil and dish soap. Pour a few drops of salad oil into the water, add an appropriate amount of dish soap and stir well, then mop the floor.

The principle is that in the process of daily mopping, static electricity will be generated due to friction, which is easy to absorb dust, and after adding edible oil, it can effectively reduce the generation of friction and static electricity, and at the same time form a protective film to make the floor clean and bright.