-
If there is water and fog in the watch, you must not use glass water, because if the watch has water inside, it must be used for maintenance or after-sales maintenance, and it will be even worse if you use glass water again.
-
No, if there is water in the watch and there is fog, you can cover the watch with both hands and let it heat up, and it will naturally volatilize.
-
No, there is water and fog in the watch, you need to go to the after-sales service to disassemble and wipe it clean, otherwise it is easy to damage the watch parts.
-
It is best not to use glass water, if you use glass water, it is easy to damage the internal software of the watch.
-
If there is water in the watch, you can let the watch try to control the sensation automatically, don't move it casually, maybe he will get better, and don't use glass water again.
-
Whatever you are short-sighted, if you are mistaken, of course you can use glass water, just don't put the water in the live broadcast.
-
If there is water, can you still use glass water for mushrooms? It's better not to use this, you can use a hair dryer to dry him, and he won't have any water in this case.
-
If there is still fog when you come back, can you use glass water? What you can't use, you can also dry it.
-
If there is water in the watch, if there is this thing, it can be used, and this is okay, it doesn't matter.
-
This meeting may not be able to wait, because if it gets into the water, then it will definitely not be able to use this glass water, which will cause him to be worse.
-
Is there any water in the chart?,This shouldn't be able to use glass water.,This should be something unfavorable to him.,So this still has to follow some precautions.。
-
There is water in the watch, and I shouldn't be able to use glass water, this should be that it will have some morning conditions, so this should still have to be processed.
-
There is water in the watch, and fog can be used by the glass, so you should check this or go to the place where the watch is repaired.
-
If there is water in the watch, you can find a bad water glass, and wipe it after disassembling it, and clean it up.
-
In this case, it will definitely not be able to be used normally, or find some specialized car repair technicians to let them do it, and see what the reason can be solved.
-
In this case, I think it's better to take it to the store and clean it, otherwise it will be easy to break.
-
This mobile phone watch watch, you can go in if you get into the water, wow, you can do this.
-
There is water in my watch, of course the words can still be used, the most important thing is to see if the components of his space have been damaged?
-
If there is water in the watch, and you can't ask for it, you should go to a professional maintenance watch for repair and maintenance to eliminate the water vapor inside. Let's put on the waterproof mat again.
-
If that's not the case, I don't think there's any way, you think you can go to a comprehensive repair center.
-
After this watch gets into the water, just take it to the place where it is repaired and clean it.
-
There is water inside the watch. And fog, of course, you can't use glass water. Go to a watch repair station and have it repaired by a professional.
-
There is water in the watch, can there be five glasses of water? You should also go to a professional watch repairer.
-
There is water in the watch, and there is fog that cannot be used with glass water, so it should be opened to dry.
-
If there is water in the watch, can I use glass water for the fog? This is best not to use glass water.
-
If there is water in the watch, there is fog, can you use glass water, no, then you can screw the cover off, and the sun will be dry.
-
If there is water in the watch, can I use glass water for fog? There is fog in the water inside the table, so you can't use glass water.
-
If there is water in the watch, some watches are waterproof, so it doesn't matter.
-
There was water in there, and there were 50 people who couldn't use glass water.
-
If you can't use the water in the phone, if you use glass water, this is not possible, you can disassemble it and blow it with a hair dryer.
-
Method. 1. If the watch is soaked in water, you can use several layers of toilet paper.
or a flannel cloth that is easy to absorb moisture, wrap the table tightly and place it on a 40-watt light bulb.
At a distance of about 15 cm, bake for about 30 minutes, and the water vapor in the table can be vaporized. Do not bake the watch close to the fire, so as not to deform the watch by heat.
Method. 2. Put the surface face inward, the bottom shell facing outward, and wear it on the wrist, and the water vapor can be eliminated after two hours. If the water ingress is severe, it is best to immediately send it to the watch shop to wipe the oil and remove the moisture from the movement to avoid rust on the parts.
Method. 3. Put the granular silicone into a closed container with the watch that has accumulated water, and after a few hours, take out the watch, and the water will all disappear. This method is simple and economical, and there is no damage to the accuracy and longevity of the watch.
The silica gel that has been absorbed many times can be dried at 120 degrees for several hours, and the water absorption capacity is renewable, and it can be used again and again.
-
The fog is caused by the evaporation of water in the watch. When the water in the watch has evaporated, there will be no fog. There are many ways to dry the moisture inside your watch or phone, and you can find them online.
Personally, I have tried and found that the most simple and effective method is to put items that have entered the water, such as watches, in intimate clothing, and keep physical contact day and night, so that the body temperature can be used to evaporate the water faster. If it's winter, it's better to put it in the bed when you sleep, and I used to put my phone in water overnight and resurrect it the next day.
-
If the watch gets into water, you can use a tool to open the back cover of the watch, and then dry it naturally or use a hair dryer to dry it, so that there will be no water mist.
-
This means that the water inside is not completely dry, so you can wait a while before putting it on, or go to a watch repair shop to have the master clean it up.
-
You can take the watch off and blow it on a hair dryer for a while, until it is crisp and dry, and then put it in a ventilated place for a while, so that there may be no more water services.
-
Hello! Judging from your description, it is still water, and it needs to be removed with a hair dryer after disassembly
-
If the watch gets into the water, you can't do it yourself, you go to the watch repair shop and ask him to open it and clean it.
-
It is recommended to go to a watch repair shop to open the back cover and clean it, and then apply some oil, so that the watch can be used normally.
-
If the watch gets into the water, you can't fix it yourself, you go to the watch repair shop and ask him to fix it, and it will be fixed when you get to that person's house.
-
Wrap the watch in a handkerchief and put it in rice for a few days.
-
I didn't do it, I had to snort, blow it with a hair dryer.
-
If it's a valuable watch, it's best to go to a watch store and have a look!
-
The methods are: 1. Wipe off the mist or water droplets, or wrap the watch tightly with toilet paper or moisture-absorbing flannel, and bake it near a 40-watt light bulb (about 5 cm) for about half an hour, and the water in the watch will be discharged into water vapor.
2. By basking in the sun to remove fogging, pull out the handle of the mechanical watch, and stuff the toilet paper or flannel around the handle, and take it to the sun for about 5 hours, and the toilet paper or flannel plug can remove the moisture in the movement.
Although there are waterproof watches on the market, ordinary waterproof watches can only prevent water splashing, while professional waterproof watches can withstand soaking in water at different depths, if the waterproof rubber ring is not replaced regularly, it is also easy to age and deteriorate, so that the waterproof effect does not enter people's expectations.
A small amount of water or water vapor enters your watch, and when the temperature is high, the water is gaseous, and when the outside temperature drops, the glass on the surface of your hand is at a low temperature and the water vapor liquefies into small droplets.
1. If the water ingress is not serious, but there is a layer of fog in the surface glass, then you can use several layers of toilet paper or flannel cloth that is easy to absorb moisture to wrap the table tightly, and bake it at a distance of 15 cm from a 40-watt light bulb for about 30 minutes to eliminate the moisture. >>>More
It's just that the water is in, but it's not much, and it becomes steam after a long time.
The dial of my watch is flooded and fogged up, in which case the watch must be taken to the repair department for re-repair and sealing.
Normal. Under normal circumstances, it is normal for water meters to enter the water meter. >>>More