-
Screen The screen of this book is very important, so everyone wants to protect it, so is adding a film to protect it well? How can I make my laptop's screen last as long as possible? The cost of the screen of this laptop accounts for a large part of the cost of the entire notebook, and it is extremely fragile, so we should protect it well.
Adding a protective film can play a certain role in protection, and you can choose some brand-name products, so that the effect will be better.
An LCD screen, the normal use time, that is, about 5 years, as time goes by, the screen of the notebook will become more and more yellow, which is the phenomenon of aging of the lamp in the screen. So how do you set the aging time back as much as possible? Here are a few tips to extend the life of your screen.
1. Usually reduce the possibility of the screen being exposed to sunlight. For daytime use, try to close the curtains to prevent the screen from being exposed to sunlight, the temperature is too high, and the aging is accelerated.
2. Do a good job of daily cleaning. In daily use, the notebook is in close contact, so that the screen will inevitably leave a variety of stains, so we have to do a good job of cleaning the notebook screen, you can choose 3M magic cloth to wipe, the general dust can be removed directly, but for the more stubborn, you have to use a little ha. But be careful, cut off all power to avoid leaks or water ingress.
3. Reduce the brightness, which can effectively prolong the service life. During the day, it is enough to open 1-2 grids, and it is good to open 2-3 grids at night, and when you turn on the machine again, sometimes there is a default choice, the screen is particularly bright, and you must remember to turn it back.
4. Remember to turn off the screen when you leave for a long time. If you have something to leave, then you must remember to turn off the screen, the shortcut key is fn+f3, so that the screen will not be white.
Fifth, do not use your hands, pen tips and other objects to point at the screen, you have to pay the price, it is easy to cause bad spots, and it will be too late to feel distressed.
-
It's very convenient to buy a screen wipe set.
-
Clean the cloth with an LCD! Or a lens cloth to wipe gently! When wiping, do not use organic solvents or ordinary strip washing products to clean!
This can cause permanent damage to the screen. If there is grease and other things that are not easy to remove on the surface of the liquid crystal, you can buy a special LCD cleaning solution to clean it! ~
-
You can go buy a cloth to wipe your glasses.
-
I only use carved dish soap to wash the display.
-
Isn't there a layer of preservation film on it?
If you have one, you can wipe it with a rag.
If you don't have it, you can have glasses and the like.
-
Every time I wipe the mirror and window, I do it like this.
Wipe it with a damp rag first. Then wipe it with a little toilet paper or paper towel.
-
Wash with dish soap, wipe several times, and finally wipe clean with a dry cloth.
-
Unless you can't get dirty things off it, don't use water, and wipe the screen with a soft material like a cloth for glasses to avoid scratches.
-
It can be wiped with a damp cloth (preferably with your hands that do not hold out of water).
-
It is recommended that you preferably rub it with alcohol. Because the outermost part of it is a polarizer, only thick, it is easy to scratch. And wiping with water may have a negative impact on static electricity, such as white stains! It is best to use a dust-free cloth to avoid scratches.
-
You can rub it with water.
How many grids are scratched, how many are broken!
Hehe, it's a bit of a bluff to you, wipe it the first time with a wet wipe, and then use a cloth (silk with cotton is the best) without leaving any scraps on the monitor.
-
You can use a neutral liquid, you don't have to be so particular about wiping tools, and a better paper towel is OK (heart print) - by the way, this is only for non-reflective liquid crystals, that is, non-mirror screens.
If you go to paste a film on the mirror screen, there is still a mirror effect, and the wear resistance of the film is very high, and then you can use the above methods.
If you talk about it, go to the computer city to buy a notebook cleaning kit (spray + wipe cloth + brush) and never wipe it with alcohol or any organic solvent, otherwise the package will be damaged, and the liquid crystal particles will be organic (although the corrosion is not obvious, there will be problems in the long run). Don't treat liquid crystals the way you used to treat lenses. Nowadays, polyester lenses have become taboo to use alcohol.
-
1. If there are no other symptoms after the appearance of water lines, there is no problem.
2. Don't let children touch the screen, it's easy to break.
3. In fact, you only need to maintain it according to the requirements in the manual.
4. If there are stains or scratches on the screen, the mirror screen has a special cleaning tool, just buy a set.
-
All of a sudden, it's not much of a problem! Be careful in the future. The panel is the more expensive thing for the notebook!
How should you maintain the manual of the computer you buy, and the most important thing is not to bump into it! Take a good look! If you don't understand, then please search the web! There are so many ways to do it!
-
You yourself said that it was a fog screen, how could there be something outside? The screen is not scratched by sharp things, it is no problem if it is not sprayed with water, clean the screen regularly, just use the general glasses cloth, and spray some screen cleaner! The film is purely psychological comfort!
-
It's best to paste it,The current screen is basically LCD very impatient,It's not the kind of TV-like machine that used to be,It is recommended to buy a film sticker yourself,My ASUS book is pasted in the after-sales service to 170 I paste it myself for only a few dozen dollars。 In fact, the film is quite simple.
-
There is a small black cloth in the box of the computer I bought, and it is very useful to wipe the screen with that cloth.
-
3M screen cleaning solution + 3M screen cloth.
Teach you how to wash the washing machine.
Highlights of the mirror However, LEDs are better for the eyes.
Just wipe it with a wet wipe from time to time, my experience.
1. Pay attention to the cleaning and maintenance of furniture surfaces. The surface of solid wood furniture is coated with paint, and the maintenance and maintenance of its paint film is particularly important, once the paint film is damaged, it will not only affect the surface beauty, but also further affect the internal structure of the product. Therefore, the furniture should be kept clean frequently, every day with a pure cotton dry soft cloth gently try to remove the surface dust, every once in a while, with a wrung out of the wet cotton silk to clean the dust at the corners of the furniture, and then use a clean dry soft cotton cloth to dry it, you can also apply a thin layer of high-quality wax after drying, like wiping leather gently wipe out the gloss, which not only maintains the wooden furniture, but also increases its brightness. >>>More
In order to maximize the effectiveness of laminate flooring in the process of use, in addition to working product quality, correct cleaning and maintenance in home life is also very important. In order to maintain the original texture and original color of the floor at home, the correct maintenance of the laminate floor can make it as bright as new. When cleaning laminate flooring, it is recommended not to wipe the floor with a wet mop, and using a professional floor cleaner for laminate flooring can maintain the texture of the floor and effectively prevent the floor from drying out. >>>More