The Xiaomi network connection request cannot be clicked OK

Xiaomi network connection request can not be determined,Normal should be that there is a problem with your Xiaomi connectionwifi,Normal should be a good place to connect。

Xiaomi network connection request, you can't click to determine, it should be a network problem, or there is a restriction on the Internet in your device.

If the Xiaomi network connection request can't be confirmed,Then in this case, it's generally a problem with the system,It is recommended that you shut down this Xiaomi machine and restart it。

The connection request of Xiaozhu network should be based on the network card settings, and it cannot be connected anytime and anywhere!

Xiaomi network connection request is uncertain, it should be this should be the situation of this network, which is unstable.

1.Check whether the data network identifier in the upper right corner of the screen is normal (g e 3g h 4g, etc.);

2.After restarting the phone, manually turn the data on and off again;

3.Check whether the network permission of the program has been disabled in the built-in network assistant of the system or has reached the current set traffic limit, and it is recommended that you cancel the restriction or reset the upper limit before trying to connect to the network;

4.Check whether it is caused by other network security management software installed, you can press and hold the home button to close the program or uninstall the application.

5.Reset APN settings (System Settings - All Settings - Mobile Network - Access Point Name - Menu Key - Reset to Default Settings), try to select the access point of "net" as much as possible;

6.It is recommended that you try to restore the factory settings after effectively backing up your phone data, and try to connect the Internet without restoring the backup;

7.If the above operations still do not help you solve the problem, it is recommended that you take the device to a nearby Mi Home or authorized repair point for testing.

When the network connection is not available on your Xiaomi phone, please check the network settings, there may be the following reasons.

1. It may be that the mobile phone does not turn on the data connection, and the recommended solution: enter the settings and turn on the data connection;

2. It may be that the mobile phone is down and cannot connect to the data, the recommended solution: recharge the mobile phone and turn on the network;

The reason for this phenomenon is most likely that there is a problem with the network system of the device, in which case it is best to reconnect the router.

This is likely to be an automatic connection, and then you can set it up in the settings, and it should be fine.

Xiaomi network,If the request can't be confirmed, you can turn off the mobile phone.,It's okay to restart it again.,Or is it a mobile phone?

The Xiaomi network connection request is unstable, and you can choose to shut down and restart, and then connect again.

The Xiaomi connection request can be confirmed, and if you want to connect, you can enter the password.

Xiaomi, the network connection has been requested to determine that it cannot be clicked, this function, he may be missing or not set up well, causing this situation to occur in a form can.

Hello, there may be a problem with the settings. Call the after-sales customer service, and they will deal with it as soon as possible.

It can be determined that in the settings of the Xiaomi network connection, you can make the request click OK.

If the Xiaomi network connection request cannot be determined, you can reset it from the settings.

It may have been falsely reported by some software.

Solution: Close the background of the phone, so the software will work, and restarting it can also be solved.

The cellular network is not turned on.

Solution: Just turn on the mobile network.

If the mobile phone is in arrears, although there is an icon display, but if you can't connect to the network, it will also display "Network connection is not available, please check the network settings and try again".

There is a problem with the software system.

Workaround: Factory reset. If that doesn't work, you can try flashing.

Hardware issues. The cellular network module is damaged.

Standard ** lines and traditional modems provide users with dial-up Internet access. Although it is currently the most commonly used connection method, many users need to find a better connection service due to its slow speed.

For many years, large companies have been renting high-speed private lines from ** companies, which are called T1, T2, T3 and T4 lines. They support digital communication, so they do not require traditional modems and offer high data rates. Unfortunately, this type of connection is very expensive, and the rate offered by the T1 line is about a few thousand dollars to rent.

For this reason, a number of new connection technologies have also emerged. Wireless connectivity such as the Integrated Services Digital Network (ISDN), Asymmetric Digital Subscriber Line (ADSL), cable modem, and satellite.

Is there a signal? I used to have a 2s machine, after upgrading. Without Shuangqing, there is no signal, and then after Shuangqing, there is a signal, and you can also connect to the network. It is recommended that you connect to WiFi to upgrade the system. Thank you for adopting.

2.It may be caused by a fault of the operator's base station or a signal shielding device nearby, so it is recommended to move the location.

3.It is also possible that the SIM card of the mobile phone is damaged, try to replace a SIM card.

4.If you are connected to a wireless network, it may be that the router or broadband is faulty, restart the router or try it with mobile data.

You can talk to ask questions, but there is no network.

3.It is also possible that the SIM card of the mobile phone is damaged, try to replace a SIM card.

Is it bad to jump out of the prompt? Save you from spending money on excess traffic, and the network connection is not available, indicating that your wireless signal is unstable and often disconnected, so it will prompt.

The estimated signal is not very good and unstable.

It should be a bug in a certain software, constantly checking the network.

The Xiaomi mobile network mode is set as follows:

1. Dual-SIM devices: Go to [Settings] - [Dual-SIM and Mobile Network] of the mobile phone in turn, select the SIM card that needs to be set, click it to select [Network Type Selection], and then select 4G network priority, 3G network priority or only use 2G network in the list;

2. Single-SIM devices: Go to [Settings] - [Mobile Network] - [Network Type Selection] of the mobile phone in turn, and then select 4G network priority, 3G network priority or only use 2G network in the list; (Or pull down the notification bar and enter the network type in the search box to see the network type selection menu).

It should be that there is no fixed IP set

Call the human service, send the hfll

It should be an IP conflict to reset it.

Hi! It could be a server issue. It is recommended that you try again or change browsers.

The Liangzhu Xiaomi router you connect to should have set up a limit on the number of people who can connect,Only with the consent of the owner can you connect at a loss。

Now there are two types of router login passwords:

1. The default login address, user name, and password are printed on the surface of the router back hall;

2. Some routers, when the user logs in for the first time, they need to manually set the password by themselves.

If you can't remember your password, you can do a factory reset and set it up again.

Factory reset: Turn on the router with a small hole on the side, press and hold it with a toothpick for 5 seconds, release it, and wait for the router to restart automatically.

Obviously, your router is the second type.

If there is a network connection error on your Xiaomi phone, it may be a problem with the network settings.

Users can try to install Hydra Internet Master on their mobile phone and then fix the mobile network settings.

Usually, after setting up the network again, you can connect normally**.

If it still can't be repaired after setting, you can try to factory reset your phone to completely restore it to its original state.

Hello, 1.It is recommended that you uninstall your system security software, go to Recovery to clear the cache, and try to recover.

2.Please back up your data, enter recovery to clear all data (turn off, press and hold the volume up + power button to enter recovery), upgrade your phone to the latest development version of the system, do not install third-party system security software for the time being, and see if it can be restored to normal.

We hope you find the above reply helpful.

Hi! Hello If you have purchased, you can pay directly, what you said should be a system problem, or you did not buy it, can not complete the payment, first of all, please confirm that you can buy, I hope my answer can help you.

A more detailed description of the problem will help netizens understand the troubles you are encountering and help you solve the problem more accurately. Thank you for supporting Xiaomi phones!

The network is busy, which means that it didn't work, and you can try again later.

Wait, the payment is valid within 3 hours.

Server Cards. Just try it later, or pay with your phone.