How to cast your phone s screen to your computer

If you are using a Huawei mobile phone, you can connect to the laptop in one of the following four ways:

1. Touch.

1. Turn on the NFC function on the phone and touch the HUAWEI Share tag (or Magic-Link tag) on the back of the phone (near the rear lens) to the HUAWEI SHARE tag (or Magic-Link tag) on the laptop (notebooks without NFC tags can be picked up for free at an officially authorized Huawei store).

2. Some notebook NFC has an antenna built into the touchpad, and there is no NFC tag on the computer, so the connection can be triggered by touching the mobile phone to the notebook trackpad.

3. When the connection between the mobile phone and the laptop is established for the first time, the mobile phone has a user privacy statement, and you need to agree to the user license agreement; If you are not connected for the first time, you only need to confirm it on the PC.

2. Sweep it.

Open PC Manager >> My Phone >> Connect Now, select Scan Code Connect or tap the upper left corner to switch to the Scan Code Connect page, open HUAWEI Browser or Smart Vision on your phone, and scan *** to connect; After successfully scanning the code, click "Connect" on the mobile phone and "Allow" on the notebook according to the prompts.

3. Proximity to the connection.

Turn on WLAN and Bluetooth on the mobile phone, and at the same time open the Computer Manager "My Phone" on the computer to connect immediately, and then directly close to the keyboard and follow the mobile phone prompts to connect successfully.

Fourth, wired connection.

1. This method is only supported in versions and above.

2. The PC Manager version needs to be updated to and above;

3. If you use a docking station adapter to connect the data cable and the PC, make sure that the computer connection port is not only the charging port, otherwise it will not be supported.

Connect the Huawei phone and Huawei PC with a wired connection or data cable, and the phone will be unlocked and the screen is on, and the connection will be successful by following the prompts on the phone.

Use the screen mirroring software to cast your phone to your computer.

2.Select the wifi connection and click *** in the top left corner.

3.Enter the projection code in the mobile phone to connect, and the projection will be successful.

4.According to the above steps, you can cast your phone to your computer.

After installing the screen projection software on your phone, open it to enter the main interface, as shown in the figure below, and then tap [Screen Projection] at the bottom.

<> cast the computer screen to the mobile phone to rush to the hall, you can achieve it in the following ways:

Use third-party apps: There are some third-party apps that can mirror your computer's screen to your phone. For example, Airmore, ApowerMirror, TeamViewer, AnyDesk, etc.

Use Windows 10's built-in projection feature: If you're using Windows 10's operating system, you can use its built-in projection feature to cast your computer's screen to your phone. The specific steps are as follows:

Use a Chromecast or other casting device: If you have a Chromecast or other casting device, you can connect it to your computer and phone, and then cast your computer screen to your phone through the corresponding app.

It should be noted that the above method requires your computer and mobile phone to be connected to the same WiFi network. In addition, when using third-party apps, it's important to make sure that the loose app is secure and whether you need to pay for it.

There are 2 ways to cast your computer screen to your phone using AirDroid Cast.

1. Use client projection.

Open the AirDroid Cast client on your phone, and click the [Receive Projection] menu bar at the bottom to see a set of projection codes.

Open and hide the AirDroid Cast client on your computer, click the [Cast] menu bar, and enter the projection code on your phone.

After the input is completed, the screen will be automatically projected and connected, and the computer screen will appear on the mobile phone after the connection is successful.

2. Use the web version to cast the screen.

In the **AirDroid Cast client on the mobile phone**AirDroid Cast (or you can not**, open the Airdroid Cast web version), you can see a set of screen projection codes.

Open the web version on the computer and click on the projection in the middle of the screen, and enter the projection code of the number of branches on the first machine.

After the input is completed, the screen will be automatically connected, and the computer screen will appear on the web version of the mobile client after the connection is successful.

The way to cast the screen of your mobile phone to the computer win7 is to click "Start" in the lower left corner of the desktop, click "System" - "Project to this computer", and then select "Turn on wireless display" on the mobile phone, and click to connect. The details are as follows:

1. On the system desktop, right-click the "Start" button in the lower left corner of the desktop, and select the "Settings" menu item in the pop-up menu.

2. In the Windows Settings window that opens, click the "System" icon.

3. At this time, the system settings window will be opened, and click the "Project to this computer" menu item on the left sidebar.

4. Click the drop-down menu of "With computer and mobile phone can be projected to this computer when you agree" in the right window, and select the "All locations are available" menu item.

5. Click on the drop-down menu of "With computer and mobile phone can be projected to this computer when you agree" in the right window, and select the "All locations are available" menu item.

<>8. In the open wireless display page, click the switch behind "Turn on wireless display" to make it open.

9. At this time, you can see the name of the computer on your phone, click on the name of the computer.

10. At this time, a prompt will be displayed in the lower right corner of the computer screen whether to allow the mobile phone to project here, click the "Yes" button.

Ten. In a while, the content of the mobile phone screen will be displayed on the computer screen.

Notes:

1. Ability to cast multiple Android devices to PC or Mac at the same time, so that you can manage multiple testing machines on the same computer.

2. The mobile phone and the computer can only be used under the same router.