When the water and electricity are inspected for the decoration of a new house, what places should b

When the new house is renovated and accepted for water and electricity, the following places should be checked:

With the decoration device, you only need to enter the area + city, and calculate the most affordable local market in 3 seconds**: [Tuba Rabbit Big Platform Counts**].

No longer worry about the company's price increase, omission and price increase.

First, check the safety and compliance of the water and electricity lines. Check the wires for leakage, short circuit and other potential safety hazards, and check whether the water pipes have leakage, blockage and other problems. In addition, it is necessary to check whether electrical equipment such as sockets, switches, etc. are working properly.

Secondly, it is necessary to check the quality and performance of hydropower equipment. Check whether water appliances such as faucets, showers, and toilets are in normal use, and check whether electrical equipment such as lights and air conditioners are operating normally. At the same time, it is also necessary to check whether the brand and model of the hydropower equipment are in accordance with the contract.

In addition, the construction quality of hydropower projects is checked. Check whether the water pipes and wires are installed firmly, and whether there are any problems such as loosening and falling off. At the same time, it is also necessary to check whether the concealed works of hydropower projects meet the specifications, such as whether the water pipes are waterproofed, whether the wires are insulated and protected.

In terms of **, the cost of water and electricity projects is generally determined according to the area of the house and the grade of decoration. Generally speaking, the cost of hydropower projects accounts for about 20% of the entire renovation cost. The exact range will vary depending on the local market.

Finally, it is recommended that when you accept the hydropower project, you can ask a professional hydropower engineer or home inspector to conduct an inspection to ensure the quality and safety of the hydropower project. At the same time, it is necessary to keep the relevant acceptance records and contracts for future rights protection. In addition, if there is a problem in the hydropower project, it should be communicated with the renovation company or developer in time to ask for a solution.

The owners will be very happy when the new house is down, but don't forget to check the water and electricity, otherwise it may leave a legacy for the future life. Let's take a look. <>

First, check the electric switch. The electric switch is the main switch of the whole house, all the sub-power will be connected to this main switch, controlled by it, if it is imperfect, it will lead to the instability of the circuit of the whole room, so this is a key inspection project, first of all, to see if the power system of the whole room can be controlled, and then open the gate, to see if the power of each room can be restored, do these checks after living will be at ease.

Second, check the meter, because the meter is related to the family's economic expenditure, if the meter is faulty, it is likely to cause inaccurate electricity statistics, which will bring a lot of trouble to life in the future, first of all, to see whether the meter is running normally, whether there is too fast or too slow to run, if there is a timely repair. <>

Also record the usage of the electricity meter at that time, because when renovating, the electricity in the room may have been used by the renovation workers, so it is unreasonable if this money is calculated to the owner.

Third, check the water meter, the water meter and the electricity meter are related to the owner's financial expenditure, to check whether the water meter is installed smoothly, turn off the place where the water can be used at home, see if the water meter will be idling, and then check the valve, and whether there is a leakage at the connection with the water meter each pipeline, if there is, immediately reflect to the property, immediately report to the repair. <>

Fourth, check the faucet. Don't underestimate the faucet, although it is not very valuable, but its usefulness should not be underestimated, is one of the most frequently used items in our lives, if there is a leakage and other phenomena, it may bring potential safety hazards to the home, so check whether there is water seepage at the connection between it and the water pipe, if so, report to the developer in time.

Attention should be paid to checking whether the materials used in it meet national standards, and whether there is leakage when draining? Whether it is made in accordance with the construction drawings, and whether the actual effect meets the final design requirements. Is the switch located at the right distance from the door?

Be sure to check whether there is water leakage, or if there is electricity leakage, you also need to check whether the doors and windows are tight, and you also need to check whether the laying of water and electricity lines is reasonable, or whether there is any abnormality in the water meter and electricity meter.

What should be checked is whether there is water and electricity leakage, and it is also necessary to check whether the windows are leaking or not tightly sealed. It is also necessary to check the water and electricity meters for abnormalities.

It is definitely necessary to focus on checking some interfaces, and it is also necessary to check the relevant kitchen and bathroom, and check these places first, if there is no problem, there should be no problem as a whole.

Hydropower engineering is the most important project in home improvement, and special caution must be taken in the acceptance to avoid safety problems. So what should we pay attention to in the acceptance of water and electricity for new house decoration? How to do the acceptance of water and electricity for new house decoration? Let's take a look!

1. The water supply pipe in the hidden place should pass the water measurement test, and the replaced water supply pipe should be pressurized to ensure that there will be no leakage.

2. Before construction, the original pipeline should be sealed to prevent debris from falling into the pipeline.

3. 25mm water pipes should be installed, and pipe clamps should be set at 100mm at corners, water meters, faucets and pipe terminals, and the pipe clamps should be installed firmly.

4. Pipeline joints and valves should be handled tightly, and there should be no leakage.

5. Water pipes cannot be installed near the power supply, and the distance between the water pipe and the gas pipe cannot be less than 50mm.

6. The inlet pipe should use hot water PPR pipe, and the sewer pipe should use PVC pipe. The hot and cold water pipes should be installed according to the position of left hot and right cold.

7. The strong wire pipe should go to the wall, and the weak wire pipe should go to the ground, and the distance between the two should not be less than 300mm. In addition, when installing water pipes, try to walk along the wall, and the trunking should be horizontal and vertical.

8. Piping should be used in laying dark wires, except for hollow floor slabs, and strong and weak wires should not be threaded into the same pipe.

9. There can be no joints in the wire pipe, and all switches and socket wires should be wrapped with insulating tape to avoid the risk of electric shock in the later stage.

How to do the acceptance of water and electricity for new house decoration:

1. Preparations before the acceptance of hydropower.

Before acceptance, the construction party, the owner and the decoration supervisor should be contacted, and the three parties should be present for acceptance, and then sign and confirm the acceptance form after passing the acceptance. In addition, the construction party should bring jacks, pressure gauges, ammeters and other hydropower acceptance tools, and the owner should bring tools such as tape measures, flashlights and notebooks.

2. Layout inspection of water and electricity pipelines.

In the acceptance of hydropower, the distance between the hot and cold water pipes should be between 10 -15cm, and follow the principle of "left hot and right cold, hot and cold" for installation, in addition, the distribution of wires should be reasonable, and weak and strong electricity should be kept at a certain distance to avoid interference.

3. Waterway pressure test and circuit test.

When carrying out hydropower acceptance, it is necessary to suppress the water test and testing circuit. When conducting the water pressure test, the owner should prepare some newspapers to lay in the water pipe joints, and check them a day later, if the newspaper is wet with water, it means that there is a problem with the water pipes, and the construction can be carried out from scratch.

Article summary: Well, what to pay attention to about the acceptance of water and electricity for new house decoration and how to do the relevant knowledge of water and electricity acceptance for new house decoration is introduced here, friends who need more information, please continue to pay attention to Qijia.com, and we will have better and more exciting content for you in the future.