What is the matter that the gas stove has gas and electricity but does not catch fire, and the gas s

1. The internal nozzle is blocked. Listen to the sound of the fireer if it is crisp, if it is crisp, it is the internal nozzle of the gas stove that is blocked.

2. The high-pressure package is damaged. One of the two stoves is usable and the other is not, indicating that one of the high-pressure packs has burned out. 3. Long-term aging of thermocouples. Continuous ignition still fails to ignite, which may be caused by the long-term and frequent use of thermocouples. ”

Summary. Hello, the situation you said may be caused by the following reasons, please check them separately.

1. Check if the battery is dead.

2. If there is no clattering sound during ignition, and the battery has been replaced, it means that the electric ignition is broken and needs to be replaced.

3. The meter of natural gas also has a battery, and it should also be replaced by paying attention to it, if it is out of power, it will not catch fire.

4. If the gas stove exceeds the pressure, the overvoltage protection will be automatically opened, and there will be no fire.

5. The pipeline is blocked, and it is better to close the electric switch after checking during inspection.

What is the matter with the gas stove having electricity and gas but not catching fire.

Hello This is a very good question, I need a little time to answer, please be patient.

Hello, the situation you said may be caused by the following reasons, please check them separately. 1. Check if the battery is dead. 2. If there is no clattering sound during ignition, and the battery has been replaced, it means that the electric ignition is broken and needs to be replaced.

3. The meter of natural gas also has a battery, and it should also be replaced by paying attention to it, if it is out of power, it will not catch fire. 4. If the gas stove exceeds the pressure, the overvoltage protection will be automatically opened, and there will be no fire. 5. The pipeline is blocked, and it is better to close the electric switch after checking during inspection.

1.The nozzle is clogged. If the ignition sound is crisp, it means that the fire cannot be started.

At this time, it is necessary to check whether the nozzle inside the burner of the gas stove is blocked. In this case, we can remove the splitter cover, thread a thin wire through the nozzle hole, and put it back on the splitter cover to re-ignite. 2.

The high-voltage package is damaged. If one burner is available and the other is not. There is almost no spark on the unusable side, indicating that one of the high-voltage packets in the electronic pulse has burned out and must be replaced with a new pulse to solve.

Of course, it is relatively difficult to solve it yourself. You can find a professional instead. 3.

The long-term use and aging of thermocouples sometimes we continue to ignite, but still cannot succeed. This condition is mostly caused by the aging of thermocouples due to long-term use. This is because the gas stove has been used for too long, and some of the parts are aging and need to be replaced.

Precautions for using a gas stove1The area where the gas stove is used for ventilation equipment must be well ventilated to avoid gas leakage and other phenomena that threaten people's lives. Good ventilation can discharge harmful gases.

2.Check regularly for air leaks. Regularly inspect the gas pipes of the gas stove for leaks.

The test method is to apply soapy water to the pipe connection. If there are air bubbles, there is a loophole here and must be repaired. 3.

Check the rubber hose for aging problems. In the event of deterioration, wear and tear, etc., the hose must be replaced immediately. The hose must not be used for more than 18 months and must not exceed 2 meters in length.

What happens if the gas stove has electricity but can't catch fire? 1. The reason may be that there is not enough natural gas, and the gas stove will automatically extinguish after a period of time, and there will be a sound at the same time. 2. It may also be that the gas pipeline is broken, at this time, the gas main gate should be turned off immediately, and the gas stove switch should be turned off at the same time to prevent household gas leakage, and then repair it in time.

Or because the micro switch is damaged, which is a very small place in the gas stove, but it is more difficult to repair than the usual fault, and it is generally not recommended to repair it yourself. It is recommended to contact the maintenance personnel to solve the problem, or because the ignition needle is dirty, you can clean the grease of the ignition needle with a dry soft towel while the gas stove is cool, and then try to ignite it.

Let's continue to introduce you to some tips for using gas stoves.

1. Keep the bottom of the pot dry to avoid water dripping into the gas stove pores and causing the stove to rust and block.

2. Do not use an oil-stained rag to clean and wipe the gas stove head pores to prevent the stove head pores from being blocked, resulting in insufficient gas supply and insufficient combustion strength.

When using a gas stove, if the battery has electricity and enough gas, it just can't catch fire, what's going on? And how to deal with it? 1. What should I do if the gas stove is noisy and has electricity and gas, but it is not ignited 1. If it is caused by a problem with the ignition needle, such as the surface surface is wrapped in oil, or the bending is messy because there is a lot of coke on the surface, resulting in the inability to ignite normally.

In this case, we need to clean the ignition needle, and clean all the oil or coke, so that it can be used normally. 2. If the distance between the positive electrode of piezoelectric ceramics and the negative electrode of the stove is too far or too close, it cannot cause gas. Then you need to adjust the distance between them, which is generally about 3 to 4 mm.

At the same time, it is also necessary to clean up the surrounding debris, especially the nozzle place, which will have coke after long-term use, and it should also be cleaned up. 3. But if there is a problem due to some parts, such as the solenoid valve is damaged, it needs to be replaced with the same model. Many brands of gas products have overpressure protection devices, once activated, they will not ignite, so it is necessary to reduce the gas pressure through a pressure reducing valve.

The reason why the gas stove has electricity and gas but cannot catch fire and how to deal with it:

First, the built-in battery of the gas stove is installed with the positive and negative electrodes or the positive and negative electrode materials are corroded and non-conductive, check the gas stove battery box, open the box cover, replace the positive and negative electrode materials that are corroded, and correctly install the battery with sufficient power;

Second, the valve of the gas stove is blocked or closed.

Check the gas stove, adjust the valve, and adjust it appropriately according to the flame;

Third, the gap between the gas stove battery lighter is incorrect.

Adjust the gap between the lighters appropriately so that the sparks are maximized when they are turned on and off.

1. Reason: The gas stove does not open the gas valve.

Solution: Sometimes this situation will also be encountered, generally encountered in this situation of the elderly forgot to open the gas valve, want to open the gas stove but can not catch fire, this solution is very simple, as long as the gas is turned on, that is, open the gas valve to naturally turn on the gas can be ignited normally.

2. Reason: Dirt from the fire extinguishing hole.

Solution: When there are a lot of dirty things in the fire extinguishing hole of the gas stove, especially for friends who often cook and do not pay attention to cleaning the gas stove, the gas stove at home is dirty, and it is said that the gas stove in your home suddenly can't catch fire, you can try to clean the fire extinguishing hole of the gas stove, because the fire extinguishing hole is blocked, it will hinder the burner mixed gas to leave a natural fire.

3. Reason: The nozzle of the gas stove is blocked.

Solution: The nozzle of the gas stove is the fire of the spray fire, if the nozzle is blocked, affecting the nozzle to ignite the gas, this naturally can not catch fire, the light is a little bit of the sound of the fire needle, but it just can't catch fire, you are the nozzle is blocked, you have to clean the nozzle.

Check the ignition or ignition needle, if there is a problem with the ignition or ignition needle, you need to ask a professional maintenance personnel to deal with it, check the pipe, oil smoke blocking the pipe will also cause the gas stove not to ignite. Find out the cause of the non-ignition and then fix the problem.

There are three conditions for a gas stove to ignite: gas, electric spark, and air.

The basic conditions are all there, the stove is basically no problem, and the reason why it can't be hit can only be that the spark is not in the gas position. There are several reasons for this:

The ignition pin is broken, and the spark does not appear at the top of the ignition pin and the center of the outlet.

The position of the center is offset from the location of the ignition town, causing the spark to be misplaced. If you turn the core and offset the ignition pin, the two tips are closest to each other, and the sparks will not deviate.

There is no centering or the centering outlet is not aligned with the EDM position.

4.Whether the gas can be burned normally, some gas impurities are also a reason for the difficulty of ignition. You can use a lighter to ignite the gas to test the flammability of the gas.

If it is a thermocouple, the stove needs to be lit and hold the knob for 3-5 seconds, and then it will be extinguished immediately.

The electronic igniter is on the iron, or the line is short-circuited.

Reasons and treatment methods for gas stoves that do not ignite fires:

1. If there is gas or not, if the gas stove does not catch fire, the first thing to check is whether there is still gas, if not, you must add gas.

2. Whether the battery has electricity or not, when you find that the ignition is not on fire, you should check whether the battery has electricity, if not, you only need to replace the ordinary No. 1 battery.

3. Poor circuit contact, mainly to check whether there is rust on the positive and negative poles of the battery box, whether the line has poor contact, if there is, the rust needs to be removed, and the line is accurately connected.

4. Pipeline blockage, once the pipeline is blocked, it is necessary to check the gas outlet valve, generally speaking, you can smell the smell of coal and the gas stove is not on fire, it is likely to be gas blockage, and then the pipeline needs to be dredged.

5. The ignition needle is dirty, the kitchen is easy to be dirty, especially easy to be contaminated with oil, etc., the gas stove is placed for too long, the ignition needle is easy to be stained by oil, then you need to clean the oil scale of the ignition needle, and then try to ignite.

6. The gas stove has a high-voltage line and its joint, once the high-voltage line is aging, it is easy to make the gas stove can not catch fire, at this time, only need to add a set of high-pressure protection, which should be observed more in ordinary life.

For details, please call us or make an appointment for maintenance.

There are many reasons, the most common is that the fire hole is blocked, the gas can't come out, the ignition needle leaks, the electricity can't come up, the battery is not enough and the solenoid valve can't be opened, look at the hole of the discharge needle to see if there is any blockage, and poke it with a toothpick.

1. The ignition needle is not properly positioned or polluted.

1) There are certain requirements for the distance between the ignition needle and the fire cover. Generally speaking, the distance between the two is 4-6mm, and it is necessary to align the fire hole, if the ignition needle deviates too much from this distance, it cannot be ignited, and the distance between the ignition needle and the fire cover can be adjusted slightly.

2) It is very likely that the cleaning is not in place after cooking, and after a long time, the ignition needle or flame-out protection needle will accumulate too much grease, which will affect the normal ignition, if this is the case, you only need to wipe the ignition needle and flame-out protection needle with a dry towel. If the ignition needle is a little rusty, you can use a metal iron sheet to gently rub the ignition needle to rub off the rust and expose the metal surface, but you must pay attention to the strength and don't rub the ignition needle too hard.

2. The gas channel is not smooth.

First of all, check the gas outlet valve, if you can smell the gas smell, it may be blocked, just dredge the gas pipeline; If the pipe is unblocked, it is likely that the nozzle in the furnace head is blocked during use, remove the fire divider cover and use a thin iron wire to pass through the nozzle hole, and then put the fire divider cover back and re-ignite.

3. Aging of high-voltage lines.

If none of the above happens, but it can't catch fire, it is likely that the high-voltage line is aging. The high-voltage wire is connected to the black wire of the ignition needle, the line will age after a long time, the most direct impact of this is that it cannot be ignited, and it is necessary to install high-voltage protection, which must be repaired by professionals.

1. If there is no fire, see if the discharge needle is discharged.

a. If the discharge needle is not discharged, it means that the discharge needle is faulty and the discharge needle should be replaced.

b. If the discharge needle is discharged, note.

It is a valve body failure and the valve body should be replaced.

2. If there is a fire:

a. If it can burn normally, it means that the ignition position is too high, and the user should be instructed to ignite.

Press down a few times, and then put the pot rack. b、

If there is a fire, but the flame is too weak to reach the stove, then.

Is the gas pressure too low, the user of the liquefied gas stove recommends its more.

Replace the pressure reducing valve, and the coal gas and natural gas should be supplied to the gas supply.

Division reflected. c. If there is a fire, and the flame can reach the fire cover.

place, but it just doesn't catch fire, indicating that the valve body is blocked, guidance.

The user unclogs the nozzle with a fine wire.

About the gas stove can't catch fire, Pearl Life today.

So much to sum up, I hope it will help you. Absolutely

The common reason for this may be a problem with the ignition needle, or the piezoelectric ceramic positive electrode and the hob negative electrode are too close or too far apart, as well as some components such as the model of the solenoid valve does not match, the overpressure protection of the pressure relief valve and other problems. Suggested treatment method 1: If there is a problem with the ignition needle, such as the surface is wrapped in oil or there is a lot of coke, it will cause the ignition to catch fire. In this case, clean the ignition needle first, if it really doesn't work, replace it with a new ignition needle.

When cleaning, you can use fine sandpaper to slowly wipe off the dirt 2, if the piezoelectric ceramic positive electrode and the negative electrode of the stove are too far or too close to each other, it can not cause gas. The optimal distance should be adjusted to about 3 4 mm, and the blockage between them should be cleared. Especially in the nozzle area, if you use it for a long time, there will be coke, so you should clean it together.

3. If there is a problem with some parts, such as solenoid valves, it is necessary to replace the same model. Either that, there's a problem with the relief valve. Many brands of gas products have overpressure protection devices, once activated, they will not ignite, so it is necessary to reduce the gas pressure through a pressure reducing valve.

Gas stove maintenance tips: in the process of use must open the window or ventilation fan to maintain indoor air circulation, do not use the gas stove for a long time, to take out the dry battery and also regularly replace the dry battery, need to regularly use a brush or steel needle to remove the dirt on the flamethrower, after cleaning must wait until dry before installation, and the rubber tube should not be used for more than 18 months.