What are the causes and treatment methods of gas stove fires?

When the pressure reducing valve nozzle or gas stove nozzle is blocked, when the pressure reducing valve or gas stove nozzle is blocked, the gas spray is not smooth, and the combustion flame is weak and weak, and the elimination method is to dredge the nozzle with a thin steel wire.

When the gas source is about to run out, when the liquefied petroleum gas in the cylinder is about to run out, the combustion flame will be very small due to insufficient pressure or too much residual liquid in the cylinder, at this time, the cylinder should be replaced with a new one.

When the hose is flattened or bent, the gas volume is small, if the flow of the hose is blocked when the hose is bent, the hose can be straightened; If the hose is flattened, replace it with a new one.

For gas stoves that use piped gas, there may also be a small flame due to the small diameter of the pipe, and the corrosion and blockage in the pipe, which can be solved by contacting the gas company.

When the gas stove is cooking food, occasionally the overflow flows out or foreign matter falls into the fire hole, the burner fire hole is blocked, so that the gas and air mixture gas flow out is blocked, the flame is small and weak, the elimination method is that the burner can be removed, the blocked fire hole is cleaned up, and the water brush cleans, after such treatment of the burner, the fault of the flame is very small can generally be eliminated.

The opening of the angle valve is too small is one of the reasons why the gas stove fire is small, at this time we can open the angle valve more appropriately to observe whether the fire of the gas stove has become bigger.

The stove head is aging or rusty, and the peeling paint layer or rust particles will block the stove, which will directly affect the gas spray and cause the fire power to become smaller, so at this time we need to clean the stove, if it is an aluminum alloy stove, it is best to replace it with cast iron.

Take a look at whether it is the peak time of gas consumption, and the gas supply is relatively small. Or if there is a problem with the gas stove.

The method of dealing with the low power of the gas stove is as follows:

1. The fire hole of the gas stove is blocked.

When the gas stove is cooking food, occasionally overflow flows out or foreign matter falls into the fire hole, which blocks the fire hole of the burner, so that the flow of gas and air mixture is blocked, and the flame is small and weak. The solution is to remove the burner, clean the blocked fire hole, and scrub it with water. Faults with small flames in burners that have been treated in this way can generally be eliminated.

2. The air source is running out quickly.

When the LPG in the cylinder of the gas stove is about to run out, the combustion flame will be small due to insufficient pressure or too much residual liquid in the cylinder. The solution is that, at this point, the cylinder should be replaced with a new one.

3. The nozzle of the pressure reducing valve or the nozzle of the gas stove is blocked.

When the pressure reducing valve or gas stove nozzle is blocked, the gas will not be sprayed smoothly and the combustion flame will be weak and weak. The solution is to unclog the nozzle with a thin steel wire.

4. The quality of the gas stove.

There is a quality problem with the gas stove itself, so that the fire power is not large enough. Solution: Choose a brand, after-sales gas stove.

5. The air source does not match.

If you use natural gas in your home, but you buy a gas stove with gas or liquefied gas, it is usually not a big enough fire. Solution: This situation should be replaced with a matching gas stove in time.

6. Other circumstances.

The angle valve is too small, and the large angle valve can be opened at this time; The hose has a small amount of air when it is flattened or bent. If the flow of the hose is blocked when it is bent, the hose can be straightened; If the hose is flattened, replace it with a new one. Gas stoves that use piped gas may also have a small flame due to the small diameter of the pipes and the corrosion and blockage in the pipes. It can be solved by the gas company.

First, increase the amount of gas intake from the gas stove. Second, increase the amount of air incoming from the gas stove. Third, get rid of the magazine rust.

First of all, check if the pressure in your gas line is enough (you can look at the neighbor's house). Secondly, check whether the gas outlet hole of the gas stove is blocked, and pass it. Then there is to adjust the damper of the gas stove.

It may be that the impurities have made the stomata smaller, just change it.

Answer: When cooking food, occasionally overflow flows out or foreign matter falls into the fire hole, which blocks the fire hole of the burner, so that the flow of gas and air mixture is blocked, and the flame is small and weak.

Solution: Remove the burner, clean the blocked fire hole, and scrub it with water. In this way, the fault of the burner with a small flame can generally be eliminated.

2.When the liquefied petroleum gas in the cylinder is about to run out, the combustion flame will be very small due to insufficient pressure or too much residual liquid in the cylinder.

Solution: New LPG cylinders should be replaced in time.

3.When the nozzle is blocked, the nozzle of the pressure reducing valve or the nozzle of the burner stove is blocked, the gas is not sprayed smoothly, and the combustion flame is weak.

Solution: Dredging the nozzle with a thin steel wire can solve this problem.

4.If the angle valve is too small, the angle valve will be too small, and it will also lead to small seedlings.

Solution: Open the large angle valve.

5.When the hose is flattened or bent by the hose, the gas volume is small.

Solution: If the flow of the hose is blocked when it is bent, the hose can be straightened; If the hose is flattened, replace it with a new one.

There is almost no fire in the question, it goes out in a few seconds, the damper is also adjusted, and it is cleaned, natural gas is used, two stoves, one has a big fire, and the answer is that one has a big fire and one has a small fire.

Ask a question that is almost no fire, and it will be extinguished in a few seconds, and it will be sent to you **, is it broken?

If the hose connecting the stove and the gas tee is deformed by external pressure, the flame of the gas stove may be large and small on one side, and the hose needs to be checked, and if there is deformation, the hose can be replaced with a new hose.

There is no problem with the hose, there is no foreign matter in it, and I have no choice, usually, you can find some professional masters to take a look at these problems.

What should I do if the flame of the gas stove is too small? Thanks to the gas master to teach me a trick, I didn't spend a penny to solve it, I knew that the gas stove put a toothpick, the effect is really powerful, not many people know, pay close attention to learn the gas stove on the gas stove The flame is too small, the gas stove flame is yellow, how to clean up the gas and clean up the gas stove.

Causes and treatment methods for gas stoves that do not catch fire:

1. There is no gas.

Usually everyone has a bottom about this, but some people may be more careless, or they may be busy with homework, and often forget, so when they encounter a stove that can't catch fire, they must first make a big fuss to check whether there is still gas.

Solution: If the bottled gas is out of gas, it is necessary to add gas, if it is pipeline gas, ensure that the gas valve switch is turned over to make it thick.

2. The battery is dead.

This is a question that is usually encountered briefly, and it is also a question that everyone attaches more importance to, and if you find that the light is not on fire and there is no sound of clicking, you must check whether the battery is charged.

3. Poor circuit touch.

This is a very simple and negligent question, but it is often encountered in many old users, mainly to check whether the positive and negative poles of the battery box are rusty, and whether the line is not badly touched.

Main precautions for gas stoves:

1. The gas source used should be consistent with that indicated on the gas stove.

2. Avoid covering the flame with a barrier plate and do not place flammable products around the gas stove.

3. The gas stove should be installed in a well-ventilated place, but should not be placed in a place where strong wind blows directly.

4. If you find a gas leak, you should immediately turn off the gas switch, open the doors and windows for ventilation, do not turn on and off the ignition of electrical appliances, and plug and unplug the power plug.

5. Do not touch the stove, stove rack, stove surface, etc. with your hands during use or just when the fire is turned off, so as not to burn it.

6. PVC pipe can not be used for connection with gas pipe, because it will melt when heated, so the hose with oil resistance should be used, if there is a crack or the interface is easy to loosen, it will lead to air leakage, do not use it, it should be replaced immediately, and it is strictly forbidden to pass through or touch the cooktop during installation.

Summary. Hello dear, happy to answer your <>

Small causes and treatment methods of gas stove fire: The reasons are as follows: 1

A clogged stomata in the stove will cause the gas stove to become smaller, 2It's because it doesn't have enough battery, 3The hose of the gas stove is under pressure from the outside.

The processing method is as follows:1Replace the battery, 2

Look to see if the hose and connector of the gas stove are being pressed by anything

What are the causes and treatment methods of gas stove fires?

Hello dear, happy to answer your <>

Small causes and treatment methods of gas stove fire: The reasons are as follows: 1

The clogged pores of the stove will cause the gas to be reduced by the late type of stove fire, 2It's because it doesn't have enough battery, 3The hose of the gas stove is under pressure from the outside.

The method of handling the leased property is as follows:1Replace the battery, 2

Look at the hose code and connector of the gas stove to see if anything is holding it down

Hello dear <>

Here's how to expand your <>

1.The gas stove is a kind of stove and dismantling the main hood, and the main cover should be located in the gap between the stove and the upper cover to supplement the lack of air during combustion, so as to promote combustion and reduce the generation of carbon monoxide and nitrogen oxides. 2.

The gas stove is divided into upper air inlet, lower air inlet, full air intake, etc

Summary. 1.Check the gas valve, and if the liquefied gas is used in the home, check the pressure limiting valve of the liquefied gas to see if the gas is running out.

2.Check the intake pipe of the gas stove, the fire of the gas stove has become less due to the bending of the plastic hose. 3.

The small fire cover of the gas stove has not been cleaned for a long time, soak it in white vinegar baking soda solution for ten minutes, brush the fire divider, and clean the impurities and dirt under the fire divider. 4.The damper switch of the gas stove is not properly adjusted.

Can you add, I don't quite understand it.

1.Check the gas valve, and if the liquefied gas is used in the home, check the pressure limiting valve of the liquefied gas to see if the gas is running out. 2.

Check the intake pipe of the gas stove, and Changshi has reduced the fire power of the gas stove due to the bending of the plastic hose. 3.The small fire cover of the gas stove has not been cleaned up for a long time, soak it in white vinegar baking soda solution for ten minutes, brush the fire divider, and clean the impurities and dirt under the fire divider.

4.The damper switch of the gas stove is not properly adjusted.

The reason why the gas stove is small may be because it does not have enough flow. Solution: Replace the gas.

If it is a new one, then there should be no problem with a small flame, unless the quality of the gas stove is not passed, or the installation is not in place. If the quality problem is ruled out, it is necessary to see whether the position of the air inlet under the stove is reasonable when the gas stove is installed, or to see how much gas is in the home.

If you have used the gas stove for a long time and find that the flame has become smaller, it is possible that the stove is too dirty and blocked, so you can remove the gas hood and stove head, and clean them with a small brush and a sharp thing respectively, but remember not to knock out the dirty things inside in a barbaric way because you are afraid of trouble, which will easily lead to the deformation of the gas hood, so that it cannot be used.

Precautions for the purchase of gas stoves

1. Liang Min should choose different forms of gas cookers according to the overall design and use requirements of the kitchen, such as desktop, built-in, ultra-thin and gas cookers with ovens or disinfection.

2. Pay attention to whether the purchased goods have a sales permit label, only the goods with this label are approved by the Beijing Municipal Gas Administration Office to meet the local gas use requirements, otherwise they are not suitable for sale in the region and are easy to cause danger.

3. In the case of as much as possible, choose a gas cooker with a safety protection device, which is usually called a safety extinguishing device, which will automatically cut off the old slag road of gas when the gas flame is accidentally extinguished, so as to prevent gas overflow.

4. Although the stove is a product with low technology content, it has particularly high requirements for safety performance, so it is necessary to buy products from professional manufacturers with a large production scale, which can ensure that the self-production rate of spare parts reaches more than 99.

What are the causes and treatment methods of gas stove fires?

Method 1: Clean the air outlet.

The flame may be caused by a blocked air outlet, you can remove the stove and use a toothpick (if you are afraid that the toothpick is easy to break, you can use a needle) to clean the blocked hole, and the flame will most likely become larger.

The oil and soup that we usually splash when cooking can easily lead to clogged pores, affecting the normal delivery of gas, resulting in incomplete combustion and smaller flames. Therefore, we can take off the stove regularly, use a toothpick to clean the air hole, the carbide and burnt chips accumulated on the stove can be removed with a small brush, and after cleaning, use a hair dryer to blow a little, you can clean the oil stains in it more cleanly.

Method 2: Check the hose for rotten and.

If cleaning the stove doesn't have much effect, you can take a look at the hose under the gas stove. The hose is the main channel connecting the gas stove and the gas pipeline, and the hose will be aged or damaged after a long period of use, and the hose interface will also be loose, which will cause air leakage, not only the flame will be small, but also there is a great safety hazard.

When inspecting the hose, check to see if it is bent or flattened, and if the flow is blocked due to the twisting of the hose, it is good to straighten it. If it has been flattened or is aging or damaged, it is necessary to replace the hose in time.

Method 3: Check the pressure reducing valve or gas stove nozzle.

The nozzle of the pressure reducing valve or the nozzle of the gas stove is blocked, the gas is not smooth, and the flame is weak when burning.

Method 4: Check whether the air source is running out.

When the gas source is almost exhausted, the combustion flame will also be very small due to insufficient pressure or too much residual liquid in the bottle. At this time, it is enough to replace the cylinder with a new one.

Method 5: Contact the gas company to solve the problem.

The reason for the small flame may also be that the diameter of the pipe is small, and the corrosion and blockage in the pipe cause the flame to be very small, which can be solved by contacting the gas company.