How to plug the fire in the gap between the fire cover of the gas stove

How to deal with a leak on the edge of a gas stove.

1. If the gas hood has not been cleaned for a long time, and there are foreign objects that cause fire leakage, it is enough to clean the gas hood.

2. The switch is twisted, just turn the switch a little smaller.

3. There is a hole in the gas pipeline, resulting in an open flame in the outer ring, and it is enough to replace a gas pipe.

What are the reasons why the gas stove can't catch fire?

1. There is no excess gas in the gas tank.

2. The battery has no electricity or the positive and negative electrodes of the battery are rusty, resulting in poor contact and cannot ignite.

3. Short circuit caused by poor line contact.

4. After a long period of use, the outlet valve is blocked by dirty things. You can gently smell it at the outlet valve, there is a smell of gas, but it can't catch fire, then it can be determined that the outlet valve is blocked, open it, of course, it is possible that the outlet valve is broken, just replace it.

5. The ignition needle becomes dirty. The kitchen is a space that is easy to store dirt and dirt, and the oil smoke is particularly heavy, and the gas stove has been used for a long time, and the ignition needle is easy to be stained and blocked by the oil.

6. Overpressure protection caused by high gas pressure. Under normal circumstances, this situation does not occur, and this kind of problem will only occur when there is an accident or excessive external pressure, so this kind of problem can be ruled out first. However, when purchasing, we must pay attention to whether the product is equipped with overvoltage protection, which can avoid accidents in advance.

I don't know if you're talking about a fire coming out of the gap between the circumference of the fire cover and its base, or if there is a fire rift in the middle of the outer ring fire cover? In the former, you can try to turn the fire cover around and try again, if it still leaks, the fire cover is deformed. If it's the latter, it's normal and you can use it with confidence.

If it is still unclear, you can provide the physical ** (leakage state) and I will judge and guide you.

The so-called fire leakage is mostly caused by the deformation of the stove head and fire cover.

When the fire cover is deformed, the mixture will leak out of the gap caused by the deformation, which will reduce the thermal efficiency of the stove on the one hand, and accelerate the damage of the stove on the other hand; More importantly, the diversion of large airflow will form incomplete combustion, the quality of combustion will be reduced, and indoor air pollution will be aggravated. When cooking, the user and the stove are "breathing and sharing the same fate", and the working condition of the stove is directly related to the user's health.

As for repairs, it's purely chicken ribs when it comes to stoves. repair, it is difficult to get matching accessories (this is a chronic disease in the field of after-sales service in China, is a national problem, but the harm on the stove is even worse); For a new stove, most users are reluctant to throw away the old stove. If you are still financially strapped and can afford to replace it with a new stove, nothing is more important than your health.

The principle of the gas stove is to supplement the lack of air during combustion by providing natural air to the gap between the stove and the upper cover, so as to promote combustion and reduce the generation of carbon monoxide and nitrogen oxides. The stove body is annular and has a mixed gas jet on the inner periphery; One end of the mixing pipe is connected to one side of the stove, and the other end is provided with an air conditioning port, and the middle of the air conditioning port is a gas input pipe; On the airbox in the middle of the lower stove, there are a plurality of air jets that spray air upwards and are blown out by the blower.

If you don't want to replace it, it's best to use some fireproof tape to wrap around him or use fireproof materials to fill the gap for him.

Pro, the gas stove gas hole is blocked by the following methods: which type is 1Check the pipeline:

First of all, check whether there are forked pipes in the gas pipes and whether there are foreign objects such as dust. If it exists, clean it up in time. 2.

Handle the air holes: If the air hole is blocked, use a sharp object to slowly pull out the blocked foreign body, clean the air hole, and then adjust the pipe to ensure smooth airflow. 3.

Replace the fire hose with a new one: If the air hole is blocked and cleared, it is still not working properly, then a new one should be considered. 4.

Check the cylinder: If the porosity does not work properly, it may also be that the cylinder does not have enough pressure, this should check whether the pressure of the cylinder is normal, if not, the cylinder should be replaced.

Summary. 1.The snail can be lowered, and there is generally glue under the panel, which can be cut with a knife.

2.You don't have to open the cooktop, at the bottom of the cooktop, there are two holes, and there are two iron sheets in each hole, carefully adjust the iron sheets, so that the inner and outer rings have green fire, try not to have yellow fire. 3.

Turn off the gas pipe switch, carefully lift the gas stove and place it on the countertop, and remove the flame ring so that you can see the installation screws. 4.The screws on the panel are under the fire cover, and the two fire covers are about 8 screws.

1.The snail can be lowered, and there is glue under the panel, and you can lose the answer by cutting it with a knife. 2.

There is no need to open the cooktop, at the bottom of the cooktop, there are two holes, each hole has two iron sheets, carefully adjust the iron sheets, so that the inner and outer rings have green fire, try to envy and do not have yellow fire. 3.Turn off the gas pipe switch, carefully lift the gas stove and place it on the countertop, and remove the flame ring so that you can see the installation screws.

4.The cracked screws on the panel are under the fire cover, and the two fire covers are about 8 screws.

If it can't be solved, then it will have to be replaced.

During the use of the gas stove, if there is a large fire cover, it must be dealt with in time, otherwise it will be very dangerous. Here are a few ways to do this.

1.Turn off the gas switch.

If you find that there is a fire cover on the gas stove, you should first quickly turn off the gas switch and stop the gas to avoid the fire getting bigger and bigger.

2.Cover the flames.

Cover the flame of the fire cover with a fire blanket or fire extinguisher to prevent the fire from spreading. At the same time, make sure that you are safe and do not stand near the source of the fire or in a place where the fire is strong.

3.Unplug it.

If it is an electric gas stove and you find a large fire cover, you can quickly unplug the power plug and cut off the power supply to avoid the power supply causing a bigger fire.

4.Remove flammable items.

In the case of handling large fire covers, try to remove flammable items to prevent the spread of fire. If there is flammable gas around the side chain Jingguo, be careful not to let the fire source directly contact the gas. Summoned.

5.Use a fire extinguisher.

If a fire extinguisher is available, it can be extinguished using a fire extinguisher. Pay attention to the correct use method, aim the nozzle at the fire source for spraying, and keep a distance to prevent the fire extinguishing agent from being sprayed on the spot.

In short, in the event of a large fire, we must be calm and composed, and take timely measures to deal with it to avoid the expansion of the fire. In daily life, it is necessary to pay attention to the maintenance and use of supplies to avoid the occurrence of such dangerous situations.

Summary. If it can be disassembled, use a thin steel wire to pass through the gas circuit (metal part) of the stove.

2. Use a needle to pass through, or use an iron bristle brush to brush it.

3. Between the combustion valve and the furnace head, there are two nozzles, one is the fire in the middle of the nozzle tube, and the other is the fire in the outer ring of the nozzle tube. If you look at it, it may be that the nozzle with fire coming out of the outer ring of the tube is blocked. If your stove is liquefied, the two nozzles have only a center aperture of ,.

Easy to block. You can use a wrench to remove the nozzle and see if the middle is open. After putting it back in, check it for air leaks with an open flame or soapy water.

What should I do if the gas stove outlet hole is blocked?

If it can be disassembled, use a thin steel wire to pass through the gas circuit (metal part) of the stove. 2. Use a needle to pass through, or use an iron bristle brush to brush it. 3. Between the combustion valve and the furnace head, there are two nozzles, one is the fire in the middle of the nozzle tube, and the other is the fire in the outer ring of the nozzle tube.

If you look at it, it may be that the nozzle with fire coming out of the outer ring of the tube is blocked. If you hit the bridge shouting that the stove is liquefied gas, the center aperture of the two nozzles is only,. It's easy to choke a smile and live wildly.

You can use a wrench to remove the nozzle and see if the middle is open. After putting it back, check it with an open flame or soapy water to see if there is any air leakage.

Take a look. What to do if the gas stove is blocked.

If it can be disassembled, use a thin steel wire to pass through the gas circuit (metal part) of the stove. 2. Use a needle to pass through, or use an iron bristle brush to brush it. 3. Between the combustion valve and the furnace head, there are two nozzles, one is the fire in the middle of the nozzle tube, and the other is the fire in the outer ring of the nozzle tube.

If you look at it, it may be that the nozzle with fire coming out of the outer ring of the tube is blocked. If you hit the bridge shouting that the stove is liquefied gas, the center aperture of the two nozzles is only,. It's easy to choke a smile and live wildly.

You can use a wrench to remove the nozzle and see if the middle is open. After putting it back, check it with an open flame or soapy water to see if there is any air leakage.