How long does it take for solid wood particle board furniture to blow before it can live in?

Simply said that the furniture made of particle board, if the seal is good, it will be no problem to move in after one or two months of decoration, and its formaldehyde release is very small, but the appropriate time is very long.

Now solid wood particle board as a new type of high-grade environmental protection substrate, in the domestic and European custom furniture market many companies are also using such a board to take into account both durable and environmentally friendly board, generally good quality, can be ventilated, 1 week or 2 months can be occupied! Solid wood particle board is a wood-based panel made of wood or other lignocellulosic materials, which is glued under heat and pressure after applying adhesive. The principle is the same as that of MDF.

Advantages: 1. The inside of the solid wood particle board is granular with a cross and staggered structure. Therefore, the nail holding force is good, and round nails and screws can be nailed.

These machinability properties are significantly better than MDF. 2. The density of solid wood particle board is higher, the wood fiber particles in the board are larger, and the essence of natural wood is retained, and the content of solid wood particle board is generally less than 5% in the use of adhesive, and the environmental protection is better. It is recommended to open the windows for ventilation during this time before the official move-in!

You can buy some activated carbon and place it in closed spaces such as wardrobes and cabinets, which is conducive to adsorbing harmful gases! You can also buy some plants that can absorb formaldehyde, which can not only decorate the home, but also purify the air, killing two birds with one stone: aloe vera, spider plant, tiger tail orchid, and cactus.

Dear, I am glad to answer for you: solid wood particle board furniture to blow for a year to live in the room is solid wood particle board furniture, in general, it is best to cool for about a year, or at least after a summer time, before you can settle in the room. The reason why solid wood particle board furniture has been cooled for so long is because it contains formaldehyde.

Its content, less than the hail finger is the most pure. The release of formaldehyde has a certain relationship with temperature and humidity. In the case of ventilation, for every degree of temperature increase, the source and volatilization of formaldehyde increase by about 10%.

In addition, the higher the humidity, the faster the formaldehyde volatilizes in the case of ventilation.

Summary. Kiss is happy to answer for you: How long does it take for furniture made of ordinary particle board to move inA:

Under normal circumstances, it takes at least three months to move in, but if you want to completely volatilize the formaldehyde in the particle board, three months is definitely not enough, and it will take at least more than one year. The particle board must contain a lot of formaldehyde, but if you want to wait until the formaldehyde is completely volatilized, it will take at least 5 years, and sometimes if the ventilation performance is not particularly good, it may take more than ten years. In fact, the release rate of formaldehyde itself is relatively slow, but in the first year or so, if the home can often open doors and windows, then about 70% can be released, and the remaining 30% can be released slowly, and this 30% will not affect our health.

Kiss is happy to answer for you: How long does it take for furniture made of ordinary particle board to move in Answer: Qin Heng Shouqin Under normal circumstances, it takes at least three months for the pellet to burn several sections of the wheel board to move in, but if you want to completely volatilize the formaldehyde in the particle board, three months is definitely not enough, at least more than one year.

The particle board must contain a lot of formaldehyde, but if you want to wait until the formaldehyde is completely volatilized, it will take at least 5 years, and sometimes if the ventilation performance is not particularly good, it may take more than ten years. In fact, the release rate of formaldehyde itself is relatively slow, but in the first year or so, if the home can often open doors and windows, then about 70% can be released, and the remaining 30% can be released slowly, and this 30% will not affect our health.

The furniture is ordinary particle board, the interior is pasted with wall cloth, the ventilation is good, it has been completely completed in June, I wonder if it will be able to move in at the end of the year?

Kiss That's okay.

I have read a lot of houses with ordinary particle board furniture on the Internet and said that it will take a year or two to move in, and I am really worried.

Under normal circumstances, it is possible to move in after three months, and after one year for insurance purposes.

You can put some plants indoors, or you can excrete formaldehyde.

Ranking of formaldehyde-absorbing plants: cactus, tiger pill orchid, tiger tail orchid, agave, pineapple, orchid, aloe vera. The above several kinds of formaldehyde-absorbing rock plants are all non-coarse tung balance, and they are pure and good.

The volatilization time of formaldehyde odor of particle board furniture is very long, and it will not volatilize cleanly in a short time, but generally in about three months, the concentration is reduced, and people can move in.

Decoration materials are generally used in the deep place of man-made panels, and the volatilization of formaldehyde is slow, the fact is not as imagined, after the decoration of the window ventilation for a few months, formaldehyde will dissipate clean. Both research and life experience have shown that after more than ten years, formaldehyde still cannot be volatilized is very common.

Particle board furniture will release formaldehyde within 10-15 years, and the release will become smaller over time. Buy some charcoal packets and open them up. The plant effect is not great.

Hello, it usually takes 2 to 3 months, and if the conditions allow, try to put it for a few more months.

"Solid wood particle board" is actually "particle board", and the environmental protection index is E2 or E3 (E0 is 0 formaldehyde emission).

Solid wood particle board furniture will have formaldehyde release within 10-15 years, and with the passage of time, the amount of release will change, and the school will buy some bamboo charcoal bags to open up the stalls. The plant effect is not great. Particle board should not be used at home, it is glue inside, you should buy E0 level ecological board, find a carpenter to do it, and order solid wood paint for the door panel.

Its service life depends on the glue used and the sealing of the plate.

Most of the glue used for the board is urea-formaldehyde resin, but it is also urea-formaldehyde resin, there are good and bad, the reaction inside the good is more complete, the glue has strong adhesion, less free formaldehyde, and the life is longer; There will be a lot of free formaldehyde harmful to the human body, the adhesive of the glue is poor, and the strength of the plate is low.

Another important factor affecting the life cycle is the closure situation, most glues are sensitive to water, such as urea-formaldehyde resin will decompose and fail when exposed to water, so this kind of artificial board will be wasted once soaked in water. There is water vapor in the air, which will slowly erode these boards, and the voids between the solid wood particles are relatively large and more susceptible, but a good closure situation, such as six-sided stickers, dipping paint, hydronamine finishes, etc., can improve the situation, and the treated furniture can be used for more than ten years, or even twenty or thirty years.

"Solid wood particle board", in fact, is the material used in panel furniture, due to the application of MDF and particleboard that have not met the national standards, the panel furniture made of particleboard has caused many indoor pollution cases, resulting in the reputation of these two boards is not very good, therefore, many salespeople have given new names to these two boards to mislead consumers. The most common name is to call MDF as particle board, particleboard as particle board, and also add the word "solid wood" in front of it to confuse consumers, in fact, this kind of board and solid wood has a big difference, and this kind of furniture contains more glue, and the main ** pollutant formaldehyde is glue, so the general particle board furniture is to blow for more than a month before it can live, and you can also buy some activated carbon and spider plants to help absorb harmful gases.

Solid wood particle board is a commonly used decorative material in decoration, normally we will ventilate the house after decoration, remove formaldehyde, odor, etc., the normal ventilation time is three months, this time is a more commonly used time, during the ventilation we can also put bamboo charcoal, green plants, grapefruit these can adsorb formaldehyde, purify the air of the items, to achieve a better living environment.

Particle boards are generally E0 and E1 grades, formaldehyde will always exist, and the formaldehyde content requirements of E0 boards are small fish air. Formaldehyde will be released slowly, E1 plate for 3 months, E0 plate for 1 month, barely able to live, but still contains formaldehyde. Particle board is a synthetic board, but the merchant advertises it as solid wood, which is a waste wood pressed glue bonded.

Very poor, the advantage is that it is cheap, and the merchant has a large profit; There are many disadvantages and it is not healthy. It is recommended to use solid wood pine boards, fir boards, oak boards and other logs to venerate, ** expensive 1000 projection per square (general furniture city particle board ** 500-700 projection per square projection).

Hello, solid wood furniture generally has to be blown for about a week, because the structure of solid wood is more meticulous, so it takes a longer time to blow, but the hardness of solid wood is relatively high, and it is more practical. Depending on the plate, the time is not the same.

Generally, solid wood particle board is a commonly used decoration material in decoration, and the house will be ventilated to remove formaldehyde odor after normal decoration, and the normal passing time is three months, this time is a more commonly used time, during which we can also put bamboo charcoal, green plants, grapefruit, which can absorb and adsorb formaldehyde and purify the air to achieve a better living environment.

Solid wood particle board furniture, to be divided into boards:

1. Solid wood pellets can be moved in for 3 months.

2. MDF particles can be moved in for 6 months.

The purchase of particle board furniture is mainly due to the volatilization of formaldehyde and heavy metals in the glue in the board.

You can live without smell, and my solid wood will be put for a year.

At least 1 month, or buy a mobile air purifier, I also bought one.

If you keep it well ventilated, you won't have much smell for about two months. Unless the custom furniture materials are too poor.

Particle board is a kind of MDF, which belongs to man-made boards, and the so-called solid wood particle board is a board made of wood that is broken into materials and then mixed with glue through high temperature and high pressure. The advantage of man-made panels is that they have a smooth surface and are easy to process, making them suitable for the manufacture of panel furniture. The disadvantage is that it is not environmentally friendly and durable, the glue will release methanol during use, and the MDF will deform and soften when exposed to humid air.

Due to the large amount of glue contained in the solid wood particle board, it is difficult for methanol to be released in a short time due to the slow release.

Activated carbon can be placed in all corners of the house to absorb odors; Doors and windows can be opened to allow natural air circulation; Green plants can be placed in the house to reduce the emission of toxic gases; Fill the container with cold water and vinegar and place it in a ventilated room to absorb and eliminate residual odors. Here's how:

1. Activated carbon adsorption method.

Place 3 to 5 plates of sufficient amount of activated carbon in every corner of the house. Using the physical adsorption characteristics of activated carbon, there is no chemical additives, it is not easy to cause secondary pollution, and it has no impact on the human body. However, it is only suitable to judge the space that only disturbs the mild odor of the mountain, and it is saturated, and once saturated, it will no longer be adsorbed.

2. Ventilation removal method.

This is a more common technique, just open the doors and windows to allow the air to circulate naturally. This can reduce the content of indoor furniture odor to a certain extent, but it cannot fundamentally reduce the existence of harmful gases, cut off the source of pollution, and treat the symptoms but not the root cause.

3. Plant law.

Plants can absorb furniture odors, and consumers can place potted plants at home, such as cacti, spider plants, etc., which can not only reduce toxic gas emissions, but also beautify and decorate the room, making the room appear vibrant.

4. Use water.

Fill the container with cold water, then add an appropriate amount of vinegar and place it in a ventilated room, and open the furniture door. In this way, it can not only evaporate the appropriate amount of water to protect the paint surface of the wall roof, but also absorb and eliminate residual odors.