What should I do if I want to find a carpenter to make a cabinet but am afraid that the quality of t

Transported to the edge banding factory for edge banding treatment, this is better than that of carpentry, and the color and integrity are much better. But it is also easy to open the glue, especially in the case of temperature changes and sun exposure. Generally, this kind of edge banding method is more chosen.

In addition, the material is purchased by themselves, so it is more assured, but there is a shortcoming to sleep is afraid that the edge of the cabinet is not good-looking and not strong, in fact, there is no need to worry about this matter, the current development of the decoration industry has solved this problem, and can ensure the quality!

<> process cutting and edge banding, and charge the corresponding fee, but this will involve, you must know the exact size, this drawing is equivalent to the factory processing of the cutting and dismantling drawing, to tell you the truth, decoration companies and general designers do not have that level at all. There are three ways to do edge banding in woodworking, the simplest is to buckle the strip directly and glue it up, which has the advantage of saving time and is not expensive. However, after a long time, the buckle will be opened.

Find a master with good craftsmanship, calculate the quantity, and choose a good brand plate.

According to the size of the cabinet machine edge banding (each processing plant specializing in edge banding, the processing fee is calculated by meters.) After sealing the edge, pull it back to make a cabinet. In this way, the problem of edge banding is solved, and the cost is not much higher.

A big brand plate store has a fee is not high, and then the master is designed according to the size of the house to make on-site, than customized practical, environmentally friendly, strong, and spend less money to use the instrument to identify. Glance.

A few days can be done, what is the problem, the site can be changed, not like a custom wardrobe, once the wrong board, sometimes 10 days and half a month may not be able to make up a board over, and wait for the installation master to install, the construction period is often delayed again and again! The edge banding of the machine is a strip-shaped rectangle that is attached around the boardThe artificial edge banding cabinet is sealed around the edge, and there will be some convex sides on both sides of the edge, while the surrounding of the machine edge banding cabinet is flat, so that the plane made by the machine is much better than the convex surface made by artificial edge banding

In such a situation, I think you can choose some decoration companies with a good reputation, or you can choose all-wood or customized cabinets.

You should find some reliable carpenter, and then watch the work from the sidelines, and this will not happen.

You can inspect it yourself, watch the carpenter while he is working, and choose the materials you buy, so that the quality can not be passed.

Find a manufacturer to carry out machine edge banding, so that the edge can be sealed better, and the problem is solved.

Do it yourself. Because you can rest assured that you do it yourself, and the quality of the cabinets you make yourself is very good, so why bother looking for carpentry.

Home decoration will basically choose to make their own cabinets, because the handmade cabinets look more professional and beautiful, and the most important thing is that you can design yourself, reserve more space for daily use, and at the same time be strong and reliable to make the use longer. But there will be a lot of problems in the hand-made cabinet on the edge, which seriously affects the overall aesthetics, now I will tell you what to do if the edge of the cabinet is too ugly for carpentry.

1. What should I do if the edge of the cabinet made by the carpenter is too ugly.

When the carpenter's cabinet is made of edge banding, it will protrude a little as a whole, which is to facilitate the installation and construction, but there will be no high and low part of the situation.

1. If some places are too prominent, you only need to use a planer knife to remove the excess part along the cabinet surface, and then use the back of the knife to smooth the surface to remove the burr to avoid accidentally scratching your hand, and you only need to scrape a certain arc.

2. If some places are recessed, this situation is more troublesome to deal with, even if it is repaired, it will be seen at a glance to affect the appearance, at this time, it is necessary to smooth it with the back of the knife through the color repair agent, and finally spray the varnish on it perfectly.

Second, what materials can be used for edge banding.

1. Choose wooden edge banding, suitable for oak, cherry and other high-grade solid wood furniture. The adhesive chosen for the wood edge banding needs to be adapted to the season to achieve a better fixing effect, and the edge is treated with paint after the edge banding.

2. Choose PVC material as edge banding, which is suitable for low-end woodworking furniture. PVC edge banding is relatively soft and easy for daily construction, but the adhesion is not too high, and it is easy to fall off after a long period of use.

3. ABS resin edge banding, this material is more advanced, and it will appear smooth and colorful as a whole, and it will not be whitish.

4. There is also a melamine edge banding, which is what we often call paper edge banding, which is easy to use and is not easy to deform, but the quality is fragile and easy to be broken, especially during the transportation of furniture.

Summary: The above is my treatment of the edge banding, I hope to solve everyone's doubts. At the same time, when choosing the material of the cabinet, it is necessary to choose environmentally friendly materials, which can improve the health to a greater extent, and add edge banding strips to make the whole more beautiful.

Kiss! Hello, it's a pleasure to answer your <> for the wheel

The reasons why the outward side of the cabinet is not sealed in advance are as follows: Generally, the carpenter will not recommend doing edge sealing because of excessive formaldehyde, mainly because this is a fine job and it is troublesome to do. The carpentry master he is familiar with said that when the carpenter hits the cabinet, Xixu must be edge-sealed, not only the edge needs to be sealed, but the edge must be handled well, otherwise it is very impractical in the later stage.

The main function of the edge sealing is to ensure the beauty and integrity of the cabinet, and it will not crack in the later use. For those finished cabinets that are not edged in the market, the longer they are used, the more they will scratch their hands. In addition, most of the finished cabinets on the market are made of MDF, which is made of glue and has poor stability.

Hope mine can help you <>

Do you have any other questions?

In decoration, carpentry is a very important link, in which the cabinet is indispensable, so is it good to ask the carpenter master to hit the cabinet on the spot? Today, I will introduce to you the advantages and disadvantages of asking a carpenter master to play cabinets on the spot, and interested friends will take a look.

Is it good to ask the carpenter master to make cabinets on the spot?

Advantages of carpentry on-site cabinets.

1. Environmental protection. This is the reason why many people choose to build their own cabinets, because the cabinets bought outside always feel that they have a smell, and they don't know what the smell is, so they feel that they must be poisonous. And the cabinets made by yourself, the wood and lacquer, are all handled by yourself, and if they meet the environmental protection standards, you can rest assured that you can use them yourself.

2. Durable. Since the woodworking materials are all fir boards or ecological boards, all of which are solid wood cores, the general woodworking will be more durable than the customized ones.

3. Save money. This is also the reason why many people choose to build their own cabinets, because we often can't judge the cost performance of brand cabinets, and it is easier to control the cost performance of building cabinets by ourselves. Comparatively speaking, it is also relatively cheap.

4. The size is appropriate.

Make your own cabinet, which can be adjusted according to the size of the room. This avoids the disadvantage that the purchase of a cabinet will be limited by size. Now that housing prices are so expensive, every inch of land in the room must be well utilized, and you can make full use of every inch of space to store things, so that other parts appear relatively empty, which is conducive to increasing the sense of space in the room.

5. The space can be designed by yourself.

Many people have special requirements for their cabinets and have their own usage habits, and it may be difficult to meet their own requirements if they buy. However, if you design it yourself, you can meet various requirements and be relatively free.

Disadvantages of carpentry on-site cabinets.

1. If the overall effect is consistent.

If you want to pursue the same color and material of all furniture in the overall home decoration, then it may not be possible to completely match the woodworking site.

2. Worry about every step.

Playing cabinets by themselves is not so labor-saving compared to customization, the carpenter master does a good job of the cabinet in the early stage, and you also need to buy cabinet doors and hardware in the later stage, and the custom cabinet door will be arranged for the merchant to install, if it is a darker color, you also need to match the color with the original cabinet frame, so it will be relatively complicated.

3. Their own design may not be reasonable in the state.

If there is a designer to design the cabinet style and layout, the carpenter master for on-the-spot reference is the best plan, but many owners are looking for their own master decoration, that is, the bag, although we must have our own ideas about the structure of the wardrobe, but our ideas may not be reasonable.

And if the carpenter's own skills and design sense are not strong, it is difficult to make valuable suggestions for our design, and it will only be built according to our requirements. Therefore, you must grasp this aspect well, and it is best to have a professional designer to design it.

That's all there is to it".Ask the carpenter master to make a cabinet on the spot, whether the carpenter master is good to make a cabinet on the spot, and the advantages and disadvantages of Chang Shuzi".