Is it necessary to install a straightener, what is a straightener

If your door is higher than a meter, then you need to install a straightener, not all doors need to be installed. If you are still deformed after installation, then it is likely that your door is deformed, after all, the straightener can not protect the door, but can prevent deformation of the straightener, to put it bluntly, it is used to straighten the door panel, avoid the deformation of the door panel, or to correct the door panel that has been deformed. The specific mechanism is to rely on metal materials to give the woodworking board a support point to reduce deformation and warping

When the door panel is warped, there is an adjustment screw on the straightener, which can be adjusted, and the key to the natural straightener depends on the force of this adjustment, which is the so-called straightener.

In fact, not all doors need to be fitted with a straightener, but if the door is too high, it is necessary to install a straightener (except for timber doors). If the cabinet door is made of solid wood particle board, solid wood multi-layer board, high-density board, etc., and the height exceeds the best according to the straightener, although the deformation of the wooden cabinet cannot be completely avoided, it can alleviate the deformation of the cabinet door to a certain extent and improve the service life.

Why the cabinet door will still be deformed after installing the straightener is mainly because the cabinet door is likely to return to moisture in the case of use, or deformed due to the violent power switch, and the straightener only has some support for the cabinet door, and it cannot be maintained to the external harm, so it cannot avoid the deformation of the cabinet door.

A straightener is something that prevents the door panel from deforming. The straightener can be divided into ordinary models, self-contained models and wafer models. Generally, the cabinet door is higher than the meter, and the straightener must be installed; If it is lower than meters, there is special treatment such as metal frame edges, and there is no need to use a straightening machine.

The straightener is also called the adjuster, and its main function is to straighten and prevent the deformation of the door panel. It can generally be used on the doors of wardrobes, cabinets, bookcases, and shoe cabinets. Of course, it is the most commonly used in the wardrobe.

When you customize your wardrobe, you will come across this product name straightener, also known as adjuster. It is estimated that some people still don't understand that there is such a thing, the effect is very straightforward, straightening, is to prevent the deformation of the door panel, or to correct the deformation. It may be used on the doors of wardrobes, cabinets, bookcases, shoe cabinets, and of course, the most common is used in wardrobes.

o Do straighteners really work? Some netizens said that Mao is useless, and it has little effect, so it may be a personal experience. But what I would say is that with the correct installation and selection of a straightener, the effect is yes.

The door is higher than the meter, and it is also necessary to install a straightener. If it is less than a meter, there is a special treatment such as metal frame edge, and the straightener can be used. o

The cabinet door with the straightener is mainly for panel furniture, and the solid wood furniture does not need to be fitted with a straightener. There are three reasons for this: first, solid wood cabinet doors generally use a frame structure, which already has the function of placing telescopic deformation.

Second, there are very few single-layer cabinet doors that are fully paneled, and those that have been seen look like they are fully assembled, and they have also done special treatment, or special technology. Even if there is, with a straightener, its tensile force cannot prevent the cracking and realization of a single layer of solid wood panels of more than 2 meters. Third:

The style of solid wood is not allowed. Not matched, not beautiful, lower grade, nondescript. o

The straightener is divided into ordinary models, self-contained models, and Weifa models. All straighteners are going to be slotted. Like the ordinary straightener, it is not slotted, even if it is installed with two, the effect is not large, the tensile effect is greatly reduced, and the most important thing is to affect the appearance. ob

The installation position of the straightener is very important, in order to make the effect of the straightener the best, please do not install the straightener in the centerline, please do not install the straightener in the centerline, the important thing is said twice. This is because the hinges play a part in preventing the door panel from deforming. The straightener can only solve the problem of preventing up and down deformation, but cannot solve the diagonal deformation.

The straightener divides the remaining area too much, and the closer it is to the hinge, the smaller the effect. The best position is from 2 3 lines to 3 4 lines, if it is a long handle, the metal on the edge of the frame plays a part of the anti-deformation structure, you can install the straightener in the 2 3 line, if it is an ordinary handle, or the handle comes with a straightener, it should be installed at the 3 4 line. This is the best way to install the guard. 

Nowadays, when people are decorating, the whole house custom furniture is still more trendy. Wardrobes, cabinets and other furniture are processed with ecological boards, but because the plates are relatively thin, they are often found to be deformed, how to solve this problem? There is now a door panel straightener on the market, which is still relatively good.

How does it work?

First of all, the plate is grooved with a special tool.

Make a groove and put the aluminum alloy straightened strip into it.

The following can be corrected according to the bending of the plate.

A special wrench is available to adjust the straightness of the sheet.

In this way, it can ensure that the door panel is used for a long time and is not easy to bend and deform.

Renderings of the installation.

Look, the embedded aluminum alloy bar is still more beautiful, and ordinary people don't know what his role is?

Foshan Shiheng aluminum straightener manufacturer, a large number of spots.

To add a straightener. In fact, I recommend a straightener for 1 meter. Of course, this is for the traditional blister process door panels.

Now there are some brands of molded process door panels with a thickness of 20mm, and the density is larger, and there is no need for straighteners. The last question asked about custom particle boards. The instructions are made of flat doors, and flat doors are basically 18mm thick in the customization industry, so I recommend that the door panel exceed 1 meter.

But those small short door panels are not necessary. Hope it helps.

Whether the straightener is installed is related to the height of the cabinet door, if the height exceeds it is necessary to install it, if the height is recommended to be installed, if the height is below there is no need to install it.

The straightener, as the name suggests, is used to straighten the door panel to prevent the door panel from deforming, or to correct the door panel that has been deformed.

The main principle of the straightener is to rely on the metal object to give the wooden board a support, so as to reduce the deformation and warping of the formwork. When the door panel is warped, there is an adjustment screw on the straightener, which can be adjusted, of course, the quality of the straightener mainly depends on the force of this adjustment, which is the so-called hail bend straightener.

The straightener can only adjust the door with a slight amount of deformation, reducing the amount of deformation. For heavily deformed doors, straighteners will not work. Straighteners are useful for particle board and MDF, but they are not very useful for multilayer boards and blockboards.

How to use the straightener

1. Before using the Ozone plate straightener, it is necessary to check whether the original flatness of the straightener is consistent with the original accuracy.

2. The adjustment of the Ousong plate straightener needs to be carried out before wood processing, so as not to affect the processing efficiency and processing quality of wood in the later stage.

3. It is necessary to select the correct straightener according to the length and width of the Ousong plate to ensure that the straightener can clamp the Ousong plate.

4. When processing, it is necessary to choose different processing speeds according to different materials, so as not to affect the processing quality and processing efficiency.

5. After the processing is completed, it is necessary to pay attention to cleaning and maintaining the straightener to ensure that it can operate normally and play the best effect when it is used next time.

Whether the straightener is installed or not is related to the height of the cabinet doorIf the height is more than it is necessary to install, if the height is recommended to be installed, if the height is below there is no need to install, the main function of the straightener is to prevent and slow down the deformation of the cabinet door, when the cabinet door is too high, the cabinet door is easy to deform, so it is necessary to install the height exceeded.

How to choose a straightener? 1. Look at the match.

Before buying a straightener, first understand which brand makes a good straightener, and then choose among the best brands.

2. Color and style.

When buying a straightener, it is best to choose a color and style that is consistent with the cabinet door and interior decoration style, so that the material looks good.

3. Look at the surface, the surface of a good straightener has uniform color, no flaws, and a clear logo.

Whether it is necessary to install the straightener is determined according to the height of the door, and the door needs to be installed if it is higher than the meter.

Now the cabinet doors are basically made of wood-based panels such as particle board and MDF, their stability and anti-deformation ability are not as good as solid wood, when the height exceeds the cabinet door made of wood-based panels such as particle board and MDF, it is easy to deform, add a straightener to the cabinet door to prevent and slow down the deformation, and prolong the service life of the cabinet door.

If the height of the cabinet door exceeds then it is necessary to install a straightener, if it is recommended to install a straightener, if it is lower than you can not install a straightener, the main function of the straightener is to prevent and delay the deformation of the cabinet door, but can not prevent the deformation of the cabinet door. Compared with the meter-high cabinet door, the meter cabinet door will be shorter, and the probability of deformation is not so high, but there is also a probability of deformation, so it is recommended to install a straightener in order to have a longer service life of the cabinet door.

Straightener classification

The straightener is divided into two kinds of installation and excavation installation from the installation, and is divided into ordinary models, self-contained models and Weifa models from the style.

The common straightener is generally installed directly from the back of the wardrobe, and this straightener can be installed with or without slotted options.

When installing, choose the installation method of slotting, so as to maximize the supporting role and tensioning role of the straightener. If it is not slotted to install, it will affect the effect of straightening the sail hitter, and the installation effect will also be affected, all non-slotted behind the cabinet door is the best look.

The straightener that comes with the door handle is usually slotted and installed in front of the door, which not only has a good decorative effect, but also prevents the door from deforming. When customizing the cabinet, if the door is relatively high, it is necessary to make a straightener, if you choose an ordinary straightener, it is best to choose a slotted installation method, which is more secure.

How to use the straightener:

1. Wait for 5 minutes after plugging in, and touch the shell with your hand to see if there is temperature;

2. After the temperature of the straightener is suitable for the rubber hole, you can pick up a handful of hair and comb it straight;

3. Use a straightener to clamp Liang Yuan's dry hair and pull it from top to bottom, if you want to pull curly hair, you can stay on the hair for a while, and then slowly pull it down, but the stay time should not be too long;

4. After pulling the hair, pull out the plug of the hair straightener;

5. Put away the straightener when it cools.