Ready to make a custom wardrobe, how many meters do the cabinet doors exceed and need a straightener

Ready to make a custom wardrobe, the cabinet door more than meters need a straightener to prevent deformation. It is usually made of segmented metal and plastic connectors, straightening machines.

Attach to the opening of the door panel to fix the door panel, which can avoid the problem of door panel deformation. If there is no straightener, the stressed side is easy to deform. The ruler is divided into ordinary installation and excavation installation, which is divided into ordinary model, complete model and Weifa model.

Ordinary rulers are usually installed directly behind the wardrobe. This straightener can be installed with or without slotted options.

1.The wardrobe can be divided into upper and lower parts depending on the size of the space, or it can be used as a whole on its own. The beauty of the wardrobe is mainly reflected in the wardrobe doors.

Because wardrobes are close to walls and tops, they are particularly susceptible to moisture. In the construction industry, which does not have high product requirements, low-end products made of recycled materials such as waste wood or sawdust are generally used, and the performance is not ideal in all aspects. As a surface decoration material for wood, paint can protect the wood and improve the gloss of the wood.

If the paint does not adhere to the surface of the wood properly, the sealing effect of the paint will deteriorate, so that the moisture in the air will come into contact with the humidity inside the wood, disrupting the moisture balance inside the wood, and causing the wood to crack and deform.

2.If the installation is not slotted, it will affect the function of the straightener and the installation effect will also be affected, so it is best to install behind the cabinet door without slotting. The straightener that comes with the door handle usually needs to be slotted in front of the door, which not only has a good decorative effect, but also prevents the door from deforming.

Personally, I think that when customizing cabinets, if the cabinet door is relatively high, you should make a ruler. If you choose the ordinary one, it is better to choose the slotted installation method, which is safer.

3.If the wardrobe is more than meters, it is recommended to add a straightener, otherwise the wardrobe is easy to deform. The straightener generally consists of segmented metal joints and plastic joints.

The area of the door panel is relatively large, and the stress point is on one side, which is easy to deform and move. The ruler is glued to the opening of the door panel to fix the door panel, and the whole is not easy to deform and move. MDF.

It is made by crushing wood into powder and then gluing it together. its performance and particle board.

There is a bit of similarity, it is also relatively difficult to bend, but the disadvantages are exactly the same. The above is the answer to the question of how many meters the cabinet door needs to be straightened to prevent deformation when preparing to make a custom wardrobe.

Cabinet doors that are generally more than two meters need to be fitted with a straightener to prevent deformation.

More than meters, if its height exceeds meters, be sure to straighten the device, be sure to choose some good materials, so that it is not easy to deform.

More than the meter is needed. Because such a height is very dangerous, if it is not fixed to prevent deformation, then it can lead to problems with the plank.

A straightener is required for 2 meter cabinet doors, and generally speaking, a straightener is required when the door is higher than 1.6 meters. Including 1.6 meters.

1. Advantages of using straighteners:

A straightener is required for 2 meter cabinet doors, and generally speaking, a straightener is required when the door is higher than 1.6 meters. Including 1.6 meters. The straightener is composed of a segmented metal pass and a plastic connector, and the straightener is glued to the opening of the door panel to fix the door panel, so that the door panel will not be easily deformed.

If you don't add a straightener, this will make it easy to deform on one side.

2. Adjustment of the door panel straightener:

The adjustment of the door panel straightener is actually the adjustment of the spring force. In addition to the common three-dimensional adjustment, some hinges can also adjust the opening force of the door, generally based on the maximum force required by the tall and heavy door, when applied to narrow doors and glass doors, it is necessary to adjust the spring force, and rotate a circle of hinges to adjust its tensile force. The straightener prevents the door from deforming and also corrects the door that has already been deformed.

It can only be used on flat doors, not on modeling doors.

In principle, this question depends on the quality of the plate, and the most authoritative information should be asked to the plate manufacturer you use. Generally speaking, more than two meters should be straightened. Cabinet doors can normally be straightened.

In such a case, a straightener should be installed, because if the wardrobe door is equipped with a garbage dish, it can effectively prevent it from deforming, thereby effectively increasing its service life.

Customize the wardrobe, if the door height is relatively high, try to choose to install a straightener, which can improve the service life of the wardrobe. It can be determined according to your actual situation.

It is necessary to install a straightener on the door of the wardrobe, because the life of the door is extended after the straightener is installed, and the cost of the straightener is not high, so it is relatively easy to install this.

Custom-made wardrobe doors that are more than meters tall need to be fitted with a straightener to prevent the door from deforming. If you choose a solid wood door, you don't need to install a straightener regardless of the height of the door, because the height of the solid wood door is less than 2.5 meters. The solid wood cabinet door can be up to 1.8 meters, and there is no need to install a straightener, and the merchant does not dare to make it too high, for fear that the cabinet door will be deformed.

Most of the custom-made wardrobes will use particle boards.

As a cabinet door, the particle board has better stability. <>

As long as the door is more than a meter, then a straightener needs to be installed. Don't choose to be uneasy in order to save money, after a long time, you will find that the door panel will be deformed, and it will be particularly troublesome to rectify it when the time comes. Whether the cabinet door should be straightened, but also according to the shape of the cabinet door, if the surface of the cabinet door has a concave and convex feeling, then the straightener can be uneasy.

There is no need to consider the height and material of the door, because the concave and convex shape indicates that the thickness of the door is not enough, and there is no way to install a straightener. <>

The straightener can prevent the door from deforming, but many people will not install it for customers if they don't communicate with the merchant when customizing the wardrobe. Because straighteners are not cheap, merchants cut corners in order to save costs. The function of the straightener is to straighten the door panel, prevent the door from being deformed, and can also correct the deformed door panel.

The straightener is slotted in the middle of the back of the wardrobe door, and then the straightener is embedded in the door to prevent deformation. <>

Generally, as long as the door panel exceeds the meter, a straightener is required. Because the longer the door panel, the greater the chance of deformation, and it is necessary to use a straightener to prevent deformation. When the current owners are decorating, most of them will look at the appearance, do not like the traditional wardrobe doors, and like the door-to-top cabinet doors, which is more atmospheric and beautiful.

Choose a door to the top of the cabinet door to install a straightener, which will increase the cost, if you want such a door, be sure to negotiate with the merchant in advance.

1.Solid wood cabinet doors, no matter what the height is, do not install straighteners, because the height of this kind of cabinet door can not be meters, and merchants can do it at most, because merchants are also afraid of deformation. 2.

If the height of the cabinet door exceeds meters, its material is particle board, MDF, multi-layer board, and it is a modern flat cabinet door, then it is necessary to install a straightener.

Depending on the plate material and thickness used for the cabinet door, the thinner the plate, the more likely it is to deform the door panel, and the higher the necessity of installing a straightener. Generally speaking, conventional MDF and synthetic board are used for cabinet doors, and it is best to use straighteners when exceeding meters. If solid wood is used for the door, or other materials such as fiberglass, glass, plastic, acrylic, etc., the straightener usually does not need to be installed.

If the custom wardrobe is more than two meters five, try to install a straightener, which can better protect the wardrobe and prolong the service life.

How high the door needs to be fitted with a straightener: more than meters. Generally, there is no need to install a straightener for cabinets with a height of no more than a meter of holes, but if the cabinet door of an ordinary plate exceeds a meter, it is best to install an upper pull core straightener, which can reduce the probability of deformation of the door cabinet to a certain extent.

The straightener is generally composed of segmented metal passes and plastic connectors, the door panel area is relatively large and the stress point is on one side, which is easy to deform and move, and the straightener is glued to the opening position of the door panel, which is used to fix the door panel to make it not easy to deform and change the vibrillation position as a whole.

First of all, you must know how long your cabinet door is, and then determine whether to install a straightener, more than 1200mm are recommended to install or optional with the door of the same length of the handle. Most of the door panels that require a straightener are flat hinged doors. This kind of cabinet will take into account the deformation of the door panel when designing, and generally control the width or height of the door panel to reduce or avoid the deformation of the door leaf!

The internal stress of the solid wood plank effectively solves the problem of door deformation, so there is no need to install a straightener. 2: MDF blister door, solid wood paint-free board cabinet door, this kind of cabinet door due to the direct splicing of the plate absorbent expansion and other factors such as the shape of the plate bending, because the whole solid wood can not add a straightener, its process is splicing, the door panel has a concave and convex shape can be a good dispersion of the stress point, do not worry too much about the possibility of deformation, and do the designer of the solid wood wardrobe, after the door panel exceeds the meter, will increase the top cabinet design.

In fact, the role of the built-in straightener is very little, either to install a door to the top of the handle, or to add a stabilizer behind the door, which is better. There are also door panel straighteners with door hinges that can accommodate at least five custom-made wardrobes, mainly including surface-mounted straighteners and concealed straighteners. Custom wardrobes of high-end brands usually use imported hidden door panel straighteners to ensure the overall appearance of the door panels.

If you don't have a hidden straightener, you can go to the market to buy surface-mounted If you choose a custom wardrobe, you choose the European and American style, and the door panels are hinged swing doors, then the door panels are separated.

The top cabinet is a separate door panel, and the lower cabinet is a separate door panel! Basically, it is necessary to mold the door, the solid wood door, the door panel is equipped with a frame 2500mm height straightener, and the height of the board we customize is 2400mmThe purpose of the straightener is to prevent the deformation of our customized door panel, which can greatly increase the service life.

It is still necessary to use a wardrobe door straightener when customizing a wardrobe, because if you don't add a straightener, then the cabinet will definitely be deformed after a long time, but we can effectively solve this problem by adding a wardrobe door straightener.

I think so. Because the height of the wardrobe is very high, it is necessary to install a straightener at this time to make the wardrobe appear more three-dimensional.

The height of the customized sheet is 2400 mm. The purpose of the straightener is to prevent the deformation of our customized door panels, which greatly extends the service life. When customizing a wardrobe, be sure to use a wardrobe door straightener, because if you don't add a straightener, the wardrobe will definitely deform after a long period of use, but we can effectively solve this problem by adding a wardrobe door straightener.

This depends on the specific situation, if the place where your wardrobe is installed is not very reasonable, and the direction of the door opening is not up and down. I didn't feel the need to install a straightener.

Personally, I think it's better to put it on, because sometimes you might use it, and it would be embarrassing if you didn't have it then.

It is necessary to install a straightener, the wardrobe is higher than one point eight meters to install a straightener, the straightener is to protect the door panel, to prevent the door panel from bending and deforming, if the wardrobe door panel is thicker, this size can be larger and then installed.

If it is two meters, it is necessary to install a straightener, the wardrobe will be deformed after a long period of use, resulting in the cabinet door can not be closed tightly, affecting the appearance, and now the cost of installing a straightener is about 500 to 800.

I don't think it's necessary, it's too cumbersome to make this for such a large cabinet. Install a pushable handle and you're good to go.