What should I do if the height of the two sockets on the decorated wall is different?

The height of the two sockets on the decorated wall is not the same, if the height difference is not large, they can be adjusted by fine-tuning, because the screw lugs of the switch bottom box can achieve fine-tuning of about three millimeters, but if the height difference is too large, it is not easy to adjust. <>

1. How to remedy the wrong socket installation after decoration?

1. The socket is blocked by furniture and cannot be used. Many times after the decoration will find that the socket is blocked, such as the place of the TV cabinet, the sofa, or the bedside table, so before arranging the socket switch, it is best to let the designer design the floor plan of the furniture, and then the position of each furniture is best not changed, otherwise it will directly affect the use of the socket and switch.

2. The design of the socket itself is unreasonable and cannot be used. Now there are some sockets that have defects in their own design, resulting in the function of the socket can not be used reasonably, so at this time we can buy a switch with a misplaced jack to solve this problem. <>

2. What should I pay attention to when installing sockets at home?

We must stay away from dangerous places when installing and operating, for example, do not install the socket on the gas meter.

The surrounding position of the bedside, stove, etc., because these positions can not only affect the normal use function of the socket, but also easily cause circuit failure, gas ** or electric shock, etc., when installing the operation, it is necessary to choose different types of sockets according to different places of use, such as in the balcony or bathroom, where the water is relatively large, it is best to choose a splash-proof socket, so as to avoid the problem of electricity safety, if the socket is installed on the tile, Then the size of the frame opened on the wall should be kept within two millimeters of the bottom box of the socket, because the frame must not be too large, nor can it be opened into the shape of a round hole, otherwise it will be very ugly when fixing the panel in the later stage. <>

If the height of the two sockets on the decorated wall is not the same, the following solutions can be adopted:

If you want to know the specific decoration**, you can use the "decoration artifact" ** device to calculate, just enter the area + city, immediately calculate the local decoration**, list the detailed list of 102 decorations, so that you don't have to worry about overspending on the decoration, click here to start calculating: [3 seconds to get the local decoration**].

1.Replace the outlet: If the height difference between the two outlets is not large, consider replacing one of the outlets so that it is consistent with the height of the other outlet.

This method is relatively simple, you only need to buy a new socket, **generally between 10-50 yuan, depending on the brand and model.

2.Adjust the position of the outlet: If the height difference between the two outlets is large, consider adjusting the position of one of the outlets so that it is consistent with the height of the other outlet.

This method requires rewiring and punching, so it will be more expensive. According to the local market price, the cost of rewiring and punching is generally between 200-500 yuan, depending on the wall material and the difficulty of the project.

3.Use a socket panel: If you don't want to replace the socket or adjust the position of the socket, consider using a socket panel to solve the height difference.

A socket panel is a decorative panel mounted on the wall, which can hide the socket inside the panel, so as to achieve the effect of uniform height. The ** of the socket panel is generally between 50-200 yuan, depending on the material and design style.

It should be noted that the above ** is for reference only, and the specific ** may vary depending on factors such as region, brand and market supply and demand. When choosing a solution, it is advisable to consult a professional renovation company or electrician, choose according to the actual situation, and discuss with them the specific cost and construction plan.

Tuba Rabbit is one of the largest decoration platforms in China, with a total of more than 41 million owners, 110,000 decoration companies, covering more than 300 cities across the country, user reputation is very good, not only to meet your decoration needs, but also to provide professional decoration companies according to your budget, want to find a good company, learn more about decoration knowledge on Tuba Rabbit, click here, free 1 to 1 for your home decoration services: [Tuba Rabbit ** official website].

You can make a fine adjustment so that you have a good flatness, and in general you can adjust it to the left or right. You can also find a professional worker, you can do it again.

Adjustments can be made with fine-tuning. You can unscrew the screws of the base and adjust them appropriately, and you're good to go.