Can the socket still work after it gets water? Can I still use the socket if it gets water?

Yes, but you should let it dry before using it. Sockets.

If the water ingress is serious, you need to open the panel to clean it, in short, there can be no water residue. Re-purchase the socket to install, the socket water should be dealt with immediately, otherwise it will lead to leakage accidents.

Pay attention to check the inside of the socket before use, such as water inside the socket, stained with dirt and dust, at this time it is best to clean it up before use, do not touch the socket when your hands are wet, you can set up some sockets with switches, so that you can cut off the power supply without pulling the plug, and to a large extent avoid direct contact with the power supply.

It is recommended not to use the socket after it is flooded, as the use of the socket after the water is flooded may cause leakage, and may also cause a short circuit in the circuit, resulting in a fire; However, the plug can be used normally after drying.

1. After plugging and draining into the water, you can use paper towels to dry the water on the surface, and then wait for it to dry naturally;

2. You can also disassemble the socket row and wipe the parts inside.

Try not to use a hair dryer, because local heating will cause socket problems, the best way is to disassemble and wipe and dry if you can disassemble, and air dry naturally if you can't disassemble.

It's okay to do it, hehe used to be all the water in my house when it rained, and the plugs were flooded, and then I put the socket in the sun for an afternoon, and the duel was fine

Don't turn on the electricity first, use a hair dryer, blow your hair, and blow it. If it doesn't work, you'll have to change it, hehe.

The first step to do is to turn off the power sockets, disassemble the sockets, dry them with a hair dryer and reinstall them.

If the water ingress of the socket is very serious, it can still be used after cleaning in the right way, and the panel needs to be opened to clean it, and there must be no moisture residue and then reinstall. When in use, the plug is fully inserted, on the one hand, for the stable operation of the electrical appliance, and on the other hand, it is also to prevent the occurrence of electric shock accidents.

Also pay attention to the use of power strips, like this kind of sockets are best used in the bedroom or living room, dry place away from the liquid. If certain isolation measures cannot be avoided for the socket strip, otherwise once the socket comes into contact with water, it will either be short-circuited or broken. Pay attention to check the dirt inside the socket and do not touch it when your hands are wet.

If the water inlet into the socket is relatively small, it will generally dry out after a period of time.

However, if there is more water in the socket, there is no way to dry it by itself, in this case, the water inside should be discharged in time, you can use a hair dryer to dry it or use a cotton swab to absorb the water inside, to ensure that there is no water in the socket before it can be used normally. If it is particularly severe, open the panel to clean it, and there must be no moisture residue, and then reinstall it.

When using various sockets, be sure to place them in a dry place that does not come into contact with liquids. Pay attention to check the dirt inside the socket, and do not touch the socket when your hands are wet.

How to choose a socket:

1. From the appearance, whether the style and grade of the socket switch are consistent with the overall style of the interior. The white switch is more versatile, and the overall tone of the interior decoration is basically a light color, so you should not choose some dark socket switches such as black and brown.

2. It is best to choose a well-known brand for socket switches, because the bad of socket switches is related to whether electrical appliances can be used normally, and there are many small manufacturers on the market that produce socket switches that are very unreliable and will not take long to break.

3. The socket switch uses bulletproof glue of high-grade materials, and its fireproof, moisture-proof, and impact-proof functions will be relatively high and the surface is very smooth. If the surface is not very smooth, and the search is thin and brittle to the touch, then the various properties of this product are not trustworthy.

The socket should not be used until it has been flooded for at least one day. It is recommended to disconnect the power supply immediately and remove the outlet. Because the socket is prone to short circuit after water ingress, it will cause hidden dangers in electricity.

The socket can be connected to various wirings for easy connection with other circuits, so it will be used in every new home decoration.

Wall sockets are optional

1. When buying a wall socket, look at the internal structure, try not to choose the thumb type, but the panel type. Because the thumb type is easy to get stuck when it is reused, the panel type will not have this problem, and it will be more convenient to use.

2. In addition, when choosing, you should also check the electric shock of the socket. Generally speaking, the conductive parts are selected for greater electric shock. In addition, it is better to pay attention to the type of material for electric shock, if possible, it is better to choose silver-nickel alloy electric shock.

The contacts of this hybrid material have good electrical conductivity and are not prone to oxidation reactions.

In addition, the contacts of silver-cadmium alloy and sterling silver have poor conductivity and are prone to oxidation reactions, so it is not recommended to choose.

Divide the situation. In the case of low water intake, it can be used by drying the plug and drain, but it is necessary to be careful that all the water must be dried when using. The socket has a large amount of water inlet and is not recommended to use it after drying.

The amount of water remaining in the socket can easily lead to leakage of the socket and drain, which may seriously lead to a short circuit in the socket and eventually lead to a fire. For plugs with large water intake, it is generally not recommended to dry them for reuse. <

In the case of low water intake, it can be used by drying the plug and drain, but it is necessary to be careful that all the water must be dried when using.

The socket has a large amount of water inlet and is not recommended to use it after drying. The amount of water remaining in the socket can easily lead to leakage of the socket and drain, which may seriously lead to a short circuit in the socket and eventually lead to a fire. For plugs with large water intake, it is generally not recommended to dry them for reuse.

Strips with voltage regulators are generally not usable after drying. After the socket with a voltage regulator has water ingress, because water ingress will cause a short circuit in the socket strip, the voltage regulator of the socket bar is likely to be less damaged. After drying, plug in the strip, because the regulator burns out, such a strip will not work properly.

In addition, the function of the voltage regulator is to stabilize the current, if the voltage regulator burns out after the water ingress, the socket in the working state also loses its original role, and the unstable current may burn out the household appliances at that time.