-
Use a special pencil or water-based pen (which can be washed off) for cross-stitch to describe the place you want to embroider first, in embroidery, it feels troublesome, but when you embroider, you don't need a needle to look at the picture.
-
The cross-stitch method is simple and fast, and the method is as follows:
1. Thread the thread through the lower left hole of the lattice to be embroidered;
2. Thread the needle into the diagonal hole, and at the same time thread the needle out from the hole on the left side of the horizontal direction;
3. Then use the same method as 2 to thread the needle into the diagonal hole, and at the same time through the horizontal hole;
4, the process is repeated, embroidered into a cross shape from top to bottom, in the state of 3, the thread is threaded into the lower right corner hole in the diagonal direction, and then penetrated from the left hole in the horizontal direction;
5. Thread the line into the lower right corner hole in the diagonal direction again, and then pass through the hole in the left direction;
6. If you go back to the starting point, you can complete all the cross figures;
7. The lines on the back will be arranged parallel to each other, do not tie knots, and pass the lines through 3 to 4 lines arranged in parallel;
8. Cut off the excess thread and tie the knot in this way, no matter how you wash it, the thread will not loosen!
-
Cross-stitch tips.
If there are several stitches on the embroidery diagram of the same color embroidery thread, start to embroider a few stitches of the cross half stitch from left to right, as follows:
When pressing the thread, the thread should not be too long, generally not more than one centimeter, more than three needles, please do not drag the thread at will, both the line is not even, the white embroidery cloth will be printed with the color of the thread, and the embroidery surface will appear uneven.
If the embroidery is wrong, try to return the needle, and the embroidery thread can not be cut, so as not to waste the embroidery thread is not enough. It is recommended that you draw the lattice on the embroidery cloth with a water elimination pen, and avoid using a pencil, otherwise it will be difficult to wash off.
Each embroidery thread has six strands, 2 strands for 14ct, 1 strand for hooking, 3 strands for 11ct, and 1 strand for hooking; 6 strands are used for 9ct embroidery, and 3 strands are used for hook edges.
1. When opening the embroidery, first find the center point of the embroidery cloth, and then start embroidery, and the direction of the embroidery thread intersection in a pair of works should be consistent;
2. In the case of horizontal continuity, embroider 1 2 stitches to the right and then return. The direction of the lines is consistent;
3. In the case of longitudinal continuity, each grid is embroidered into a cross and then embroidered downward, you can't be lazy, hehe;
4. Closing the needle: do not knot the thread at the end of the cross-stitch whether it is open or at the end, empty the thread on the back and press each other, and be careful not to let the thread become entangled;
5. Hooking: In order to outline the outline and make the work more distinct, generally use 1 strand of thread when embroidering with 2 strands of thread, and use 2 strands of thread when embroidering with 3 strands of thread.
-
The tips for embroidering cross-stitch are as follows:
1. You should understand the stitch method, there are many types of cross-stitch, and different pattern embroidery methods are also different, and now the more common ones are full needle embroidery, half needle embroidery, quarter embroidery, etc. The full needle embroidery method is embroidered according to the coordinates, and the half-needle embroidery method is half of the full needle embroidery method.
2. Attention should be paid to the grid, cross-stitch is embroidered according to the line of the checkerine, if there is no reasonable grid, it will increase the difficulty of embroidery, and it will also affect the effect of embroidery. Therefore, it is recommended that you can use a pencil or water-soluble pen to mark a ten-by-ten grid before embroidery, and pay attention to consistency with the drawing.
3. Attention should be paid to embroidering the same color first, usually there are more colors of a cross-stitch, if you start embroidering randomly, it will not only affect the overall effect, but also give people a dazzling feeling, which instantly makes people feel uninterested. Therefore, we should embroider according to certain rules, you can first use a pen to point the part of the same color on the embroidered cloth, and then embroider other colors after embroidering the same color.
4. Attention should be paid to the needle collection work, after the pattern is embroidered, it is necessary to do a good job of collecting the needle, do not knot the thread, otherwise it is easy to affect the overall effect, and it may also make the embroidered pattern loose. The correct way is to empty the threads on the back and press them against each other, taking care not to get tangled in the threads.
-
First of all, let's understand the basic embroidery method of cross-stitch:
Generally, it is divided into six steps: 1. Needle down. 2. Go down. 3. Pull the line. 4. The needle comes up. 5. Get your hands on it. 6. Pull the line.
It's cumbersome and slow!
Among the many embroidery methods of cross-stitch, the speed of picking embroidery should be the fastest! Also known as the "king of speed" in the industry, picking embroidery is actually omitting the 2nd and 3rd steps in the above steps, and the needle does not change hands after coming up, and directly connects the needle of the next needle. Step 5 can then be omitted.
The speed of picking embroidery has definitely more than doubled. But the shortcomings of the embroidery are also obvious, the most regrettable thing is that the stitches are not neat enough, if you have the patience ** when you don't pull evenly, you can still see it when you embroider it. There is also a pick embroidery is only suitable for embroidering into a piece of color when used, scattered needles because to calculate the next needle point, more troublesome, but also easy to embroider wrong.
And with the color of only a few stitches, it is even more powerless.
The basic stitches of cross-stitch are: 1. Complete cross-stitch stitch method, full stitch method (x): In fact, it is used on the embroidered cloth and crossed to form a cross, so that multiple stitches form a cross-stitch diagram. >>>More
The basic embroidery method of cross-stitch is divided into: 1. Full needle embroidery method. 2. Half-needle embroidery. 3. Quarter embroidery. 4. Three-quarter embroidery method. 5. Back needle embroidery method. 6. French Junction. >>>More
The landlord can take a look at what is marked on it. The medium grid is used with three strands. The big grid uses four strands.
Don't worry about fake online shopping, there are basic fakes on the cross-stitch market now. As for talking about branding. DMC is good, but too high. >>>More
The following is the best cross-stitch sales in the Chinese market, if you want to do **, the best is to choose a better brand, ***. >>>More