How to show the method of cross stitch, cross stitch skills

The basic stitches of cross-stitch are: 1. Complete cross-stitch stitch method, full stitch method (x): In fact, it is used on the embroidered cloth and crossed to form a cross, so that multiple stitches form a cross-stitch diagram.

First put on by mesh 1, then by mesh 2, then by mesh 3, then by mesh 4, then by mesh 5, then by mesh 2, then by mesh 3, then by mesh 6, and so on. This stitch method can cope with most drawings. 2. Half-needle embroidery method (1 2x):

Half needlework is made up of a diagonal line, which is half of the full needlework. 1 2 cross-stitch stitch, that is, only embroider or one of the directions of the needle 4 cross-stitch stitch, that is, embroider a 2 4 stitches, and then embroider a 1 4 stitches combined into 4 cross-stitch stitches, in the middle of the cloth and one of the holes, with this stitch will make the transition in the embroidery drawing more natural. For example, the edges of a person's face.

5. In order to make everyone see clearly, there is a gap between the two cross-stitches. 6. The actual effect after continuous single cross-stitch. 7. Needle embroidery, first follow the left stitch method of the cross in the order of numbers.

8. After walking according to the stitch method in the above figure, then walk the stitch method in the following figure in the order of numbers. The continuous stitching method is suitable for the use of a certain part of the stitch of a certain color, so that the embroidery speed will be faster. 9. The last hook of cross-stitch will make the embroidery more prominent and beautiful.

10. Use a strand of line for hooking. Walk the stitches in the order of the position of the number marker. 11. French knot:

The more rolled it is, the bigger the grains, and it is most suitable for eyes. Hold the needle up to the 1 position and thread it, wrap the thread around the needle, and insert the needle into the 2 position. Hold the end of the thread with your non-embroidery fingers, tighten the knot, and then thread the needle through the fabric and hold the thread until it must be loosened.

If you tie a large knot, you can increase the number of strands of the line appropriately, but only wrap it once. If the landlord is a novice, you can embroider from a small amount first, and then embroider a large pattern after being proficient; 1. Small pictures don't have to be gridded, large pictures, generally in the store, the boss will help find the grid to mark; 2. Each cross-stitch drawing has a line mark marked with symbols or color blocks, and different line marks represent different colors of embroidery thread. 3, ** marked above the full needle (cross fork X), half needle (1 2X), quarter needle (1 4X) and hook edge (B ST) to be strictly embroidered according to the requirements to complete a beautiful work.

I'm also a newbie, so let me share it with you.

1. Embroider the part with less color first, and then embroider the part with more color, which can play the role of outlining the line, and finally embroider a large area and fill in the color.

2. The line should not be tight or loose. . . There's no way, don't pull out the hole anyway, just press the long line with your fingers and pull the line through, just fine.

3. If the distance is long, you can't pull the line over, don't.

4. The intersection direction of the line should follow one direction, and if it is oblique to the left, it will always be down, and if it is up, it will always be up.

5. Bury the thread head in the cloth, there is a skill, you can find it on it, there is a schematic diagram.

6. The line on the back is messy, it may be that the direction of your front is inconsistent.

7. Horizontal embroidery and vertical embroidery? Do you mean cloth or finger line?

8. Always put the needle vertically and loosen the winding of the thread.

The first floor is too humorous, and it is true, and to put it simply, it is all crossed. Wrong is right, right is wrong!

Hello, cross-stitch is actually quite easy to get started, but it is important to persevere.

Needless to say, the front should be embroidered in the same direction, first in this way, and then embroidered in the second layer, and at the same time the thread should be evenly forced, or the xx embroidered out will be of different sizes.

On the other hand, if it is messy, there is a possibility that a thread will be knotted after it is used up. Knotting is absolutely unacceptable, the thread should be pressed behind the thread that has already been embroidered, or a new thread can be started, and the tail of the previous thread and the tail of the new thread should be pressed under the new thread to be embroidered at the same time. The second possibility is that the thread is not completely pulled, only look at the front, ignore the back, the thread is knotted and not untied, so that the back of the embroidery is very messy.

It must be done that there are no dead knots, no knots, and the back is flat. Unless there is no place to press the line next to it when the line is finished, the knot can be considered to be completed. And when you want to embroider a large picture, if the same color is far away, don't jump the grid embroidery, that is, stretch the line to another position, which is very time-consuming, and it is not flat.

Double-sided embroidery and single-sided embroidery are basically the same in terms of crimping and threading. The difference is that single-sided embroidery should be judged according to the size of the cloth lattice, and it can be embroidered with several strands of thread to be full. The double-sided embroidery is to be sewn, and when it is sewn together for most of the time, it is filled with the contents inside.

And double-sided embroidery in the final end of the thread hidden in the filling, it's OK, stitching is to tighten the thread, but not too tight, affect the appearance.

Add a point: double-sided embroidery first cut the whole piece of cloth, cut two equal pieces of cloth, and then embroider, embroidered, and then according to the shape of the figure, expand a grid outward, cut it out, and then sewn it up. The shape of the hook when stitching, set by yourself, there are some, there are ——— like this, generally a strand of thread, bury the tail line, you can embroider fast, can only be embroidered by hand.

I think that it is too troublesome to embroider one by one, and the embroidery that should be strung by string is the embroidery of one line at a time, and there should be writing inside, and it is better to embroider the edge first.

The easiest way is to buy different colors specially used to paint embroidery cloth, and you can clean off the gouache, find the center corresponding to the picture on the cloth, and then draw a small grid of 10 * 10, so that it is very easy to embroider, if you are still afraid of embroidery mistakes, you can use different colors of pens on the cloth to point out the picture to be embroidered, so that it is not easy to embroider wrong, and you don't have to embroider the picture all the time.

Cross-stitch drawings are composed of symbols and squares, there are colored and black and white, each square represents a stitch step, cross-stitch pattern encyclopedia, the symbol on the grid represents the embroidery thread color used in this stitch step, there will be a symbol and color corresponding to the table on the drawing, in embroidery, as long as the embroidery thread is selected according to the color corresponding to the symbol to embroider in turn.

1.First draw a 10*10 grid on the embroidery cloth with a water-dissolved pen, and the most obvious grids on the embroidery drawing are one to, and use this as a reference when embroidering, so as to avoid counting the wrong grid or looking at the serial.

2.with an embroidery stand. If you don't have an embroidery frame, you don't have to sell it at any cost.

You can use large cardboard to hollow out the middle. The embroidered cloth is fixed around the cardboard with clips, and the cardboard is held by hand when embroidering, or it can be placed on the lap, one hand on the top and the other on the bottom, two hands embroider much faster than one hand.

3.For large areas of one color, you can embroider the outline first, and then fill it in.

4.The direction of the traces should be consistent.

2. When embroidering cross-stitch, you can first embroider only one side of the diagonal, and then embroider the other side diagonally after the whole piece is embroidered, so that the back is also very neat. If you look at the top layer of the picture, you can see this effect very clearly. 3. About the order of embroidery.

It doesn't matter if you pick a small range of patterns in a large range, but for a small range of patterns, we had better follow what we are familiar with, from top to bottom, from left to right, so that the embroidery is not easy to mess up. 4. There is also a small trick when embroidering, some unskilled friends may embroider seriously with a stitch and a thread, so turn it over and over, not to mention the trouble, it is not good for the eyes. Groping for the right position on the reverse side, you can complete the two-step operation in one step on the front 5, when we finish embroidering a thread, we will find that there will be an extra section on the back, and directly use the needle to bring it from the embroidered place.

After embroidery, fill the basin with water, pour laundry detergent, put the embroidered cross-stitch in it, and soak it for the afternoon. Then gently rub it with your hands to remove the excess color from the cloth and dry it in the sun.

Questions. Heart] [heart] [heart] [heart] [heart].

Thanks for your support! Looking forward to your likes! I wish you a happy life [squeeze your eyes] [applaud] [heart].

To see the color on the cross-stitch drawing**, don't make the wrong thread, don't pull the thread too tightly, and don't.

If it is too loose, it is good to be flat with the embroidery cloth, and the direction of the crimping line should be consistent, that is, the direction of the thread on the top should be the same. There is also the embroidery according to one color, embroider all the parts of this color, and then use the second color.

color, so that you don't have to make mistakes about the color and the thread doesn't get knotted. Secondly, pay attention to embroider less and then embroider more, and the bright outline needs to embroider the boundary of the outline and then embroider a large area.

There are a few things to keep in mind:

First, before opening the embroidery, find the center point of the embroidery cloth and start embroidery, and the direction of the intersection of the embroidery threads in a pair of works should be consistent;

Second, in the case of transverse continuity, embroider 1 2 stitches to the right first and then return. The direction of the lines is consistent;

3. In the case of longitudinal continuity, each grid is embroidered into a cross and then embroidered downward, not lazy, hehe;

Fourth, the cross-stitch should not be knotted at the end of the thread, and the thread head should be empty on the back and pressed against each other, taking care not to let the thread end become entangled.

5. Hooking edge In order to outline the outline and make the work more distinct, generally use 1 strand of thread when embroidering with 2 strands, and use 2 strands of thread when embroidering with 3 strands.

Embroidered cross-stitch feelings:

The process of embroidering cross-stitch is also a process of self-cultivation. No matter what troubles you have, once you pick up the needle and thread, you can forget all about the outside world and fully devote yourself to it. In the process of embroidery, do not assume it as a work.

It should be done as a form of entertainment, a pastime, and a work of art, and as long as you can calm down, you will be able to discover another world. At the same time, using your hands and brains is also a kind of cultivation.

If there is an instruction manual, you should be patient with this embroidery, and skill is secondary.

Try to embroider in one direction so that it looks more beautiful...If you buy a large one, buy a water-soluble pen to draw the pattern you want to embroider, so that you will not embroider wrong due to visual fatigue when embroidering! If you still don't understand, please continue to ask...Hehe.

To put it simply, cross-stitch is made up of two straight lines in opposite directions, so according to its image, it is what we call "cross-stitch". In a simple embroidery, its stitches will be relatively simple, they are likely to be composed of "x", but as the work begins to be complex, its stitches will begin to increase, but the reason why cross-stitch is a simple project is because its stitches are relatively few, commonly used: full needle, half needle, 1 4 needles or 3 4 needles, hook edge and French knot.

Basic stitching method Cross stitches (one by one) For individual or vertical side-by-side cross stitches, one by one can be embroidered. Cross needle (horizontal row back and forth embroidery) cross needle (x) is the most basic stitch method of cross stitch, for horizontal side by side cross needle, can be used as a method of back embroidery. Century Baixin Shanggongfang Cross Stitch Quarter and half cross stitches (1 4x and 1 2x) cross stitches are supplemented by cross stitches, mostly presented in the corners of the pattern.

**Shop Century Baixin The hook edge treatment around the hook edge pattern makes the pattern layered The French knot is properly used to decorate the pattern, and the work is colorful. Z-type embroidery special embroidery method, in some drawings have this embroidery method, both beautiful and neat. Century Baixin Shanggongfang cross-stitch.