The mobile phone can t rush in, why can t the mobile phone rush in?

If you are using a Huawei phone, you can follow the following methods to determine the cause of the problem:

1. It is recommended to use the standard charger for charging.

It is recommended that you use the charger and charging cable that come standard with your phone for charging. Non-standard chargers and cables may not be compatible with the phone, causing the phone to not charge.

2. Please check whether the charging port is abnormal.

Check whether the mobile phone charging interface is blocked by foreign objects, mildew, corrosion, internal connection line damage, etc., if there is such a phenomenon, it is recommended that you go to the nearest customer service center for cleaning and testing.

3. If your phone has not been used for a long time.

If your phone has not been used for a long time, or you have not charged your phone in time after the low battery is turned off, and the phone battery is over-discharged, and it takes more time to activate the battery, it is recommended that you charge the phone for more than 30 minutes to see if the phone responds.

4. If your phone is charged to 80% stop charging.

Some models have added a new intelligent charging mode, which is a battery protection mechanism that effectively extends the battery life through AI intelligent charging management.

5. Please cross-verify.

Please replace the charger and data cable that can be charged normally, and cross-check whether the charger and data cable are faulty.

If the charger and data cable are normal, but the phone still cannot be charged, it may be a malfunction of the phone. It is recommended that you back up your data in advance (WeChat QQ and other data need to be backed up separately) and bring your mobile phone, original charger, original data cable and purchase voucher to a nearby customer service center for testing.

First of all, make sure that the charger is normal, such as working on other mobile phones. If there is no problem, there is a problem with the mobile phone battery or charging control circuit, and you need to contact the mobile phone after-sales customer service to repair and solve it.

That's a problem with the battery.

There must be a problem with the charging place.

Hand trembling sail machine hole jujube punch eggplant trembling hail does not go into the electricity.

If the phone can't be charged, don't repair it, come and stare at the type to learn this late trick code dismantling.

Check it first to see if it's a telegram to Dayuan with your socks open. Then check to see if the phone plug is plugged in. If it's all normal, it still can't be charged. Just go to the phone repair place and let them show you Lu Du. Is it a broken phone connector?

Is it that the battery is not working, or is it a mismatch now.

What should I do if my phone can't be charged.

First, first see if it is a problem with the battery, if it is a problem with the battery, try to put it on a ventilated floor for a while. 2. If there is a problem with the mobile phone socket, wipe the dust inside the shirt socket with a brush and a small brush, or it is recommended to change a socket or count or spare the cable. Third, the mobile phone cannot be charged normally, it is recommended to take it to the mobile phone repair shop for repair as soon as possible.

If the phone can't be charged, don't fix it, come and learn this trick.

If the phone cannot be charged, Samsung mobile phones are generally recommended to perform the following steps to troubleshoot and deal with them:

1.Use the original charger to connect to the home power source for charging.

2.Replace the power outlet, try or change a data cable to connect to the charger for charging.

3.If the phone can be turned on normally, it is recommended to back up the data in the phone (such as contacts, multiple files, etc.) and restore the phone to factory settings.

If the problem persists according to the above methods, please bring the purchase invoice, warranty card and machine to the nearest service center for inspection.

If the phone can't be charged, you can try the following:

1. It may be that the charger is in poor contact, you can re-plug the charger and try it; 2. If conditions permit, replace the charger for comparison and observation, eliminate the charger fault, and charge it after replacing the charger, indicating that there is a problem with the previous charger; After replacing the charger, it still cannot be charged, which may be due to an abnormality in the charging interface or mobile phone; 3. Use the original charger to charge, and check whether it returns to normal when the machine is turned off and charged; 4. After backing up important data (contacts, multiple files, etc.), go to [Settings] - Other Settings - click [Restore Phone]. You can also bring your mobile phone to the local official customer service center for testing.

If the phone can't be charged, don't fix it, come and learn this trick.

If your phone won't charge, try it

1.Replug or replace the cable with the charging head. (It is recommended to use the original version) 2For mobile phones with detachable batteries, you can turn off the battery and use a cotton swab to clean the battery contacts and the charging port of the mobile phone.

If the above methods do not solve the problem, please bring the purchase invoice, repair card and machine to the Samsung service center for inspection.

In several cases, please check the troubleshooting:

1.The charger interface is aging or the charger itself is damaged.

2.The charging port of the mobile phone has been oxidized for a long time, resulting in poor contact.

3.The battery itself The metal feet (on the battery, usually 3 golden copper sheets) oxidize - in this case, please wipe with an eraser.

4.The battery itself has run out of life, and it is generally charged and discharged more than 9000 times - in this case, replace the battery directly (be sure to pay attention to the number of milliamps and voltage so as not to affect the service life of the mobile phone).

Please compare the above situations one by one. When encountering faults that cannot be eliminated, non-experienced people, do not disassemble the machine by themselves (disassembly is risky), and can go to the nearest after-sales maintenance during the warranty period.

There is also a situation that the mobile phone battery is easy to produce inertia when placed for a long time, whether it is an authentic original mobile phone battery, or a commercial battery of a well-known brand such as a domestic Hony battery with guaranteed quality, it is like this, so do not put the battery away, the activation method should be charged for a long time with the original charger, if not, go to the repair shop to activate it.