How to install the bedside socket to make it easy to use?

Bedside outlets are inconspicuous, but if not properly designed, they can cause a lot of inconvenience to your life. So this problem cannot be ignored, so how to install the bedside socket to facilitate the use? Let's take a look. <>

1. First of all, determine the height of the bedside socket. If this location is not determined in advance, it will lead to a problem for the placement of all kinds of large furniture bought in the future, because the placement principle of these furniture is not to block the socket, and it is necessary to make reasonable use of space, so it is best to make a plan in advance.

Normally, the height of the bedside socket is based on the bedside table. Generally speaking, it will be about a fist away from the bedside table. Being too tall and too short can cause inconvenience.

Now the bedside table in China is generally designed to be about 70 cm, so it is very appropriate for the socket to be set at 75 or 85 cm.

The transverse position of the socket should also be calculated, not set in the part of the bed, so that the headboard will block the socket, so that there is no way to use, to be set on both sides of the headboard about 10 cm on the look. <>

2. Determine the number of sockets. It's a good idea to have an outlet on the left and right sides of the headboard, which will feel much more convenient. Coupled with a special socket for air conditioning, three sockets can fully meet the electricity needs of ordinary family bedrooms.

Of course, you can also set up a few more sockets according to the actual situation of different families, but try to control them within 5. Otherwise, the walls will look extra cluttered and affect the overall aesthetic of the room. And if the socket is not enough, you can also connect the socket, so I personally think that there is really no need to set up so many sockets.

3. Cooperate with other electrical appliances. If there is a TV in the bedroom, it is recommended to design the socket behind the TV, so that it will not affect the normal use of the TV, in addition to the TV, this socket can also be used with some other low-power appliances, such as electric fans and so on.

The bedside socket should be installed within easy reach, as it is very easy to install.

Be sure to be within reach of yourself when you lie down, and there must be a safe distance to avoid things on the table accidentally touching the switch, and it is best to use a multi-hole socket, which is also more convenient for charging.

At this time, you should pay attention to the location of the installation, and the installation position must be flush with the bed, so that it is more convenient to use, and you should also pay attention to the number of installations, which should be grasped at about two to three.

Personally, I think it's best to install the socket flush with the bed, which is the most convenient to use.

Buy an outlet and connect it to the socket behind the head of the bed.

When decorating a house, the most indispensable thing is the socket, especially the bedside socket. We need a bed every day to sleep, but in fact, many people tend to ignore the position of the head of the bed. For example, when decorating, the installation of sockets at the head of the bed was not planned, and when you moved in, you found that there were too few sockets, the wrong specifications were selected, or the location did not match.

Precautions for the location of the bedside socket.

The first is the height of the bedroom socket, the position must be higher than the height of the head of the bed, now the height of many heads of the bed is more than 70 cm, significantly higher than the height of most switch installations, if you do not modify the height, the head of the bed will block the socket as soon as you put it up.

The position of the bedside socket also has a lot to do with the furnishings of the bed, if the installation is too centered, it is easy to appear that the socket is just behind the back of the bed, and the socket should not be too close to the bed, which is easy to cause potential safety hazards.

Bedroom sockets should be arranged in such a way that the two main symmetrical walls are provided with combined power outlets, and that there are combined power outlets on both sides of the bed when one end of the bed is against the wall, and there are air conditioning power outlets.

The arrangement of the position and number of bedside sockets should be considered practically, the sockets and the bed should be kept at a certain distance, and considering the length of the power cord and the convenience of use, the combination of switches and sockets should be designed as much as possible to facilitate normal use and ensure that it will not cause potential safety hazards.

Find a knowledgeable electrician to use a voltage tester and a multimeter to measure and determine which is the live wire, which is the neutral wire, and which is the ground wire to avoid unnecessary problems.

On the L interface on the live wire socket, on the N interface on the neutral wire, and on the ground wire identification interface in the middle.

First stop the power supply in the junction box, and then screw the one-color wires together, so that the same line in the entire series socket box will be connected, and the socket will be used after it is installed, and then the red line will be connected to the L port in turn, the yellow wire is connected to the middle indirect ground wire port, and the green is connected to the N port.

The lines in this wire box are not very standardized, and the blue and green lines should be the same color.

I need to explain first. The six heads in the wire box should be the live wire, the neutral wire and the ground wire respectively, one group comes in and one group goes out.

All, the blue-green is connected to the zero line, which is connected to n. The two yellow ones are connected together and connected to the middle ground wire (亖). The two red wires are connected together and connected to the L.

The red line is connected to L, the green wire is connected to N, and the yellow and green wire is connected to E

Bedside switch installation method steps.

Step 1: Prepare the materials, a closed switch wire, a push button switch, and connect the wire and the button switch together.

The second step, wiring, arranges the wires in a hidden place and connects them to the wall switch.

Step 3: According to your own needs, set the switch button in a suitable position in front of the bed, and the switch on the bedside table is not very convenient for people who get up at night.

If you want to do it in one step, directly install a mamadeng touch, 2 meters of touch tape on the head of the bed, the whole head of the bed is touched, that is called a convenient, install all double-sided adhesive stickers, there is no difficulty in moving after you can also pull out this switch before it comes out, currently only in China.

Buy two dual-control switches, one pressed at the entrance door of the bedroom, and one pressed at the head of the bed, so that you can achieve dual control!